Használati útmutató Meliconi Gumbody universal 6 Light

Meliconi távirányító Gumbody universal 6 Light

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Meliconi Gumbody universal 6 Light (7 oldal) a távirányító kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/7
GB
8
USING THE KEYS AND FUNCTIONS
The functions described below are only available
if they are already foreseen by your TV.
Keep your Instruction Booklet and Code Booklet for future reference.
For anyone with internet, via the website www.gumbodylight.com, it is even easier and quicker
to programme the remote control and discover all the potential of the
UNIVERSAL 6 Light thanks to the on-line guide.
SET-UP
Read these instructions carefully before programming your remote control!
Thanks to its large database and numerous functions the U N I V E R S A L 6 L i g h t remote control is
ideal for replacing up to 6 remote controls of any brands for TV - VCR - DVD - SAT - AUX - TER
(Digital
Terrestrial)
.
Its ergonomic form and casing in soft rubber make it easy to grip and protect it against falls and bumps.
Thanks to the LIGHT button, the keys light up so you can use the remote control even in the dark. Thanks to
the LEARN function, the U N I V E R S A L 6 L i g h t can also learn the signals of any original remote
controls issued in the future and thus not yet included in its database. It can also learn and memorize secondary
functions on the function keys F1 - F2 - F3 - F4 or on any other key on the keypad.
Thank you for choosing a MELICONI remote control.
U N I V E R S A L 6 L i g h t
Keys for selecting which appliance
you want to use.
They light up whenever a command
is sent to the selected appliance.
Key to activate
the LEARN functions.
This lights up while the commands
are being memorized and during
their transmission.
Specific area for SET TOP BOX
Control the volume using +/–
To move around within the MENU
or to control BRIGHTNESS and
COLOUR
Number keys
Keys that the user can customize
to memorize and access additional
commands
Impact-proof rubber casing
ON/OFF key to turn the
selected appliance
on and off
TELETEXT keys
Turns the volume on and off
FORWARD / REWIND
functions for VCR and DVD
VCR/DVD function keys: RECORD
PAUSE - STOP - PLAY
To select the next (P+) or previous
(P-) channel or programme
Confirm button
To select an external
input terminal
TV functions always active
LIGHT button
to light up the keys
9
To programme the
U N I V E R S A L 6 L i g h t
remote control,
follow the indications in paragraph
A
,
B
or
C
.
The quickest and easiest way to programme the remote control is by
consulting the website www.gumbodylight.com.
Warning: programme one appliance at a time!
BRAND SEARCH PROGRAMMING MODE
A
FITTING THE BATTERIES
Before programming and using
the remote control, fit the batteries.
The remote control requires 2 new AA/LR06 batteries. Insert the batteries as shown:
• Change the batteries if the light indicator starts to flash
during use. The batteries are low.
• Make a note of the codes for your appliances on the
adhesive label inside the battery cover in case you have
to reprogramme your remote control.
• This remote control has a permanent memory and does
not lose the programmed codes or functions when the
batteries are removed.
To display and make a note of the code memorized by means of the search,
follow the instructions described in the paragraph CURRENT CODE DISPLAY.
ADDITIONAL CHECK
Check that some of the other functions used on your original remote control are working correctly. If the
commands function incorrectly or erratically, you have probably entered a code for a similar remote control
but not the right one. In this case, repeat the search procedure starting from point 3, entering the code
previously used (e.g. 0025).
+++
1. Turn on the appliance to be programmed:
- if a VCR, insert a cassette
- if a SAT or TER select a programme
- if a DVD insert a DVD.
2. Look for the brand of the appliance you want to programme
in the code book and make a note of the code indicated
alongside (
e.g. PHILIPS 0025
) or the code for the brand
indicated by the arrow.
3. Hold down the selection key for the appliance to be
programmed for 5 seconds.
4. When the key is released, it will start to flash. Enter the
brand code previously identified (
e.g. 0025
). The selection
key flashes more quickly to indicate that the remote
control is ready for the search.
5. Point the remote control at the appliance. Press and slowly
release the ON/OFF key or PLAY for the VCR and DVD
several times, stopping when the appliance responds
correctly to the command.
6. When the appliance responds correctly, press OK to
confirm. Three flashes indicate that the search operation
has been completed correctly.
PHILIPS 0025
PHONOLA
PHILIPS
or
5 SEC.
or or or or or
10
1. Turn on the appliance to be programmed:
- if a VCR, insert a cassette
- if SAT or TER select a programme
- if a DVD insert a DVD.
2. Look for the brand of the appliance you want to programme
in the code book and make a note of the first code in
the list (
e.g. Philips TV 1000 - VCR 5070
).
3. Hold down the selection key for the appliance to be
programmed for 5 seconds.
4. When the key is released, it will start to flash. Enter the
previously identified code (
e.g. 1000
). Three flashes
indicate that the code has been memorized correctly. If
not, try the code entry procedure again from point 3.
PHILIPS 0025
TV 1000 1006 1007 1008
1009 1010 1011 1012 1013
1014 1015 1016 1017 1018
VCR 5070 5072 5073 5076
N.B. THE LIGHT INDICATOR STOPS FLASHING.
The remote control exits programming mode and the light indicator stops flashing:
• if no keys are pressed for 14 seconds
• if an invalid brand code is entered
• if a key other than ON/OFF or PLAY is accidentally pressed
• if the end of the code search list has been reached. In this case, go back to point or switch
to programming mode .
C
DIRECT CODE ENTRY
B
The quickest and easiest way to programme the remote control is by
consulting the website www.gumbodylight.com.
Warning: programme one appliance at a time!
GLOBAL SEARCH REMOTE CONTROL PROGRAMMING
C
This operation can take up to 20 minutes and should be carried out if you have not
succeeded in programming the remote control by means of the other methods.
The quickest and easiest way to programme the remote control is
by consulting the website www.gumbodylight.com.
Warning: programme one appliance at a time!
Remember to make a note of the codes used to programme the remote control on the adhesive
label inside the battery cover for quick and easy reprogramming.
N.B. THE LIGHT INDICATOR STOPS FLASHING.
The remote control exits programming mode and the light indicator stops flashing:
• if no keys are pressed for 14 seconds
• if an invalid code is entered
• if the wrong keys are accidentally pressed.
ADDITIONAL CHECK
Check that some of the other functions used on your original remote control are working correctly. If the
commands function incorrectly or erratically, you have probably used the wrong code. In this case, repeat
the procedure starting from point 3. This time, however, use the NEXT CODE in the list (e.g. Philips TV
1006 – VCR 5072).
+++
1000
1. Turn on the appliance to be programmed:
- if a VCR, insert a cassette
- if SAT or TER select a programme
- if a DVD insert a DVD.
5 SEC.
or or or or or

Termékspecifikációk

Márka: Meliconi
Kategória: távirányító
Modell: Gumbody universal 6 Light

Szüksége van segítségre?

Ha segítségre van szüksége Meliconi Gumbody universal 6 Light, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók távirányító Meliconi

Meliconi

Meliconi fully 8 Útmutató

13 Január 2025
Meliconi

Meliconi universal 4 Útmutató

22 Szeptember 2024
Meliconi

Meliconi Pratico 2 Útmutató

18 Szeptember 2024
Meliconi

Meliconi Personal 2 plus Útmutató

27 Augusztus 2024
Meliconi

Meliconi GumBody Light Útmutató

18 Augusztus 2024
Meliconi

Meliconi Pratico 2.1 Útmutató

18 Augusztus 2024
Meliconi

Meliconi Gumbody Personal 7 plus Útmutató

18 Augusztus 2024
Meliconi

Meliconi Gumbody Personal 2 Útmutató

18 Augusztus 2024
Meliconi

Meliconi Control TV+ Útmutató

18 Augusztus 2024
Meliconi

Meliconi Control TV Útmutató

18 Augusztus 2024

Útmutatók távirányító

Legújabb útmutatók távirányító

Magnum

Magnum RC-328 Útmutató

9 Április 2025
Conrad

Conrad src 9200 Útmutató

3 Április 2025
Hama

Hama 40095 - 5in1 Útmutató

2 Április 2025
Hama

Hama 20312 - Easytip S9 Útmutató

1 Április 2025
Hama

Hama 20320 - Zapman 4in1 Útmutató

31 Március 2025
Sonos

Sonos Controller for iPhone Útmutató

29 Március 2025
Universal Remote Control

Universal Remote Control UR4U Útmutató

29 Március 2025
ELV

ELV SRC-7000 Útmutató

27 Március 2025
Metronic

Metronic ZAP 2 - 495383 Útmutató

27 Március 2025
Metronic

Metronic 495405z Útmutató

27 Március 2025