Használati útmutató Meliconi Gumbody Facile 1

Meliconi távirányító Gumbody Facile 1

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Meliconi Gumbody Facile 1 (5 oldal) a távirányító kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/5
6
Thank you for choosing a Meliconi remote control.
Keep this booklet for future reference.
The Facile 1 remote control is designed to control televisions. Thanks to its extensive database it can control
numerous TVs produced by a variety of brands on the market. It can also be connected to a PC using the
Meliconi audio cable (to be purchased separately), thereby allowing the user to download the most up-to-
date confi guration information. The remote control has a non-volatile memory, meaning that it does not lose its
settings even if there are no batteries in it. Its ergonomic shape and soft rubber body make it easy to grip and
protect the remote control if it is knocked or dropped.
IMPORTANT: The remote control must not be exposed to excessive heat sources.
USE OF THE BUTTONS AND FUNCTIONS
The functions of the buttons described below are available only if they exist on your device.
Volume control +/–
Numeric keypad
Confi rm selection
Fastext functions or for selecting sub-menus
using colours
Selects digital TV and radio For selecting an external
input source
For selecting the next programme
P+ or the previous programme P–
MUTE turns sound OFF and ON
For moving around within the MENU
Selects
analogue/digital Displays the list of programmes
ON / OFF switches the device OFF and
in some cases ON
Specifi c buttons for decoder
TELETEXT buttons
I
EN
7
Before using the remote control, insert the batteries and programme it.
The Facile 1 remote control is a universal remote with a memory containing data regarding numerous devices
produced by different brands on the market.
Each original device has a specifi c code which must be used to set up the remote control.
So to use the Facile 1 you must enter the specifi c code for each device you wish to control.
So use one of the following methods to identify the correct code and set it in your remote control:
A) - INTERNET (recommended)
B) - CELL PHONE (SMS)
C) - MANUAL SEARCH
SETTING CODES
If you have an Internet connection available, follow the on-line guide on the www.meliconi.com/guide website
to identify the specifi c code for the TV you wish to command. Then set the codes manually in your MELICONI
remote control as described in the ENTERING THE CODE DIRECTLY procedure.
SETTING CODES USING INTERNET
INSERTING THE BATTERIES
The remote control requires 2 new 1.5V alkaline AAA/LR03 batteries.
Insert them as illustrated.
Try pressing a number button and check that the red light remains lit
continuously until you release the button. If the light fl ashes, the batteries
inserted are not charged and are about to go fl at, therefore you must
substitute them.
Do not leave fl at batteries inserted,
as liquid may leak and damage the remote control
Today, Meliconi gives customers who don’t have internet the chance to receive the code for programming their
remote control directly on their cell phone.
Simply send an SMS to this number 0039 345 7518893 as follows: 1A, TV, Brand, Model
- Brand, Model = to indicate the brand and the model of the device to be controlled.
Example: 1A, TV, PHILIPS, 32PFL3614 (if you don’t know the model, don’t write anything after the brand).
Once you have received the SMS with the list of codes, set the fi rst code in the remote control as described in
the ENTERING THE CODE DIRECTLY section.
Point the MELICONI remote control at the device, which should already be ON and press the ON/OFF button
on the remote.
If the device does NOT switch off, try setting the consecutive code in the SMS list on the remote control.
SETTING CODES USING A CELL PHONE
(the service s fee and the only cost is that of sending the SMS,
which naturally depends on the rates of the service operator in question)
8
NOTE: If you don’t receive an SMS on your cell phone or if the message says ERROR / NO CODE, it
means the system has not been able to process the data you have sent. Do not try sending another
SMS use the MANUAL SEARCH instead.
When the device reacts check whether the other buttons are operating correctly too.
If they do, the remote control is ready to use.
If they don’t, you are probably using an incorrect code destined for a very similar device; at this point
ignore the SMS list and consult the MANUAL CODE section to fi nd a more suitable code.
SETTING CODES USING A MANUAL SEARCH
(only to be performed if the specifi c code could not be found)
CHECK
Check that the other buttons correspond to the functions of the original remote control; if not, it is likely
that the code found is incorrect, but is used for a very similar device. In that case, repeat the procedure
from point 2.
If the manual search for the code is successful, obtain the code in use by following the DISPLAY CODE IN
USE procedure and make a note of it inside the battery cover.
NOTE: During the search the indicator stops fl ashing and the remote control exits the programming mode
in the following cases:
• if for 12 seconds the button indicated is not pressed or if another button is pressed
• if the list of codes to fi nd is terminated. If this happens, go to the www.meliconi.com website
1. Switch on the TV and select a programme.
2. Press and hold down the ON / OFF and MUTE buttons
simultaneously for 6 seconds.
3. Release the buttons. The indicator light will fl ash. Point
the remote control at the device and press the ON/OFF
button. If the TV does NOT switch off, press the same
button again slowly (it may be necessary to press the
button several times).
4. When the TV responds correctly, press OK. Three long
fl ashes indicate that the operation has been carried out
correctly.
6 SEC.
and

Termékspecifikációk

Márka: Meliconi
Kategória: távirányító
Modell: Gumbody Facile 1

Szüksége van segítségre?

Ha segítségre van szüksége Meliconi Gumbody Facile 1, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók távirányító Meliconi

Meliconi

Meliconi fully 8 Útmutató

13 Január 2025
Meliconi

Meliconi universal 4 Útmutató

22 Szeptember 2024
Meliconi

Meliconi Pratico 2 Útmutató

18 Szeptember 2024
Meliconi

Meliconi Personal 2 plus Útmutató

27 Augusztus 2024
Meliconi

Meliconi GumBody Light Útmutató

18 Augusztus 2024
Meliconi

Meliconi Pratico 2.1 Útmutató

18 Augusztus 2024
Meliconi

Meliconi Gumbody Personal 7 plus Útmutató

18 Augusztus 2024
Meliconi

Meliconi Gumbody Personal 2 Útmutató

18 Augusztus 2024
Meliconi

Meliconi Control TV+ Útmutató

18 Augusztus 2024
Meliconi

Meliconi Control TV Útmutató

18 Augusztus 2024

Útmutatók távirányító

Legújabb útmutatók távirányító

Magnum

Magnum RC-328 Útmutató

9 Április 2025
Conrad

Conrad src 9200 Útmutató

3 Április 2025
Hama

Hama 40095 - 5in1 Útmutató

2 Április 2025
Hama

Hama 20312 - Easytip S9 Útmutató

1 Április 2025
Hama

Hama 20320 - Zapman 4in1 Útmutató

31 Március 2025
Sonos

Sonos Controller for iPhone Útmutató

29 Március 2025
Universal Remote Control

Universal Remote Control UR4U Útmutató

29 Március 2025
ELV

ELV SRC-7000 Útmutató

27 Március 2025
Metronic

Metronic ZAP 2 - 495383 Útmutató

27 Március 2025
Metronic

Metronic 495405z Útmutató

27 Március 2025