Használati útmutató Maytag MGD6630HC
Maytag
Ruhaszárítók
MGD6630HC
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Maytag MGD6630HC (35 oldal) a Ruhaszárítók kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/35
GAS DRYER OWNER'S MANUAL
GUIDE D’UTILISATION DE LA SÉCHEUSE AU GAZ
W11361424A
W11361425A-SP
Table of Contents
Dryer Safety ...........................................................2
Dryer Safety.......................................................2
Dryer Maintenance and Care ..................................5
Cleaning the Dryer Location ................................5
Cleaning the Dryer Interior ..................................5
Removing Accumulated Lint ................................5
Cleaning the Lint Screen .....................................5
Changing the Drum Light (on some models) .........6
Check Your Vent System for Good Airflow ............6
Maintain Good Airflow.........................................6
Nonuse, Storage, and Moving Care .....................7
Special Instructions for Steam Models .................7
Installation Instructions..........................................7
Requirements .........................................................7
Tools and Parts ..................................................7
Location Requirements .......................................9
Gas Dryer Power Hookup – U.S.A. and
Canada ........................................................... 10
Gas Supply Requirements ................................ 10
Installation ........................................................... 11
Install Leveling Legs ......................................... 11
Make Gas Connection – U.S.A. and
Canada ........................................................... 12
Venting Requirements ...................................... 13
Plan Vent System ............................................. 13
Install Vent System ........................................... 15
Connect Inlet Hoses ......................................... 15
Connect Vent ................................................... 16
Level Dryer ...................................................... 16
Complete Installation Checklist.......................... 17
Sécurité de la sécheuse ....................................... 18
Sécurité de la sécheuse.................................... 18
Entretien et réparation de la sécheuse ................. 21
Nettoyage de l’emplacement de la
sécheuse......................................................... 21
Nettoyage de l’intérieur de la sécheuse.............. 21
Retrait de la charpie accumulée ........................ 21
Nettoyage du filtre à charpie.............................. 21
Changement de l’ampoule d’éclairage du
tambour (sur certains modèles) ......................... 22
Vérification d’une circulation d’air adéquate
pour le système d’évacuation ............................ 22
Pour maintenir une bonne circulation d’air .......... 22
Précautions à prendre avant des
vacances, un entreposage ou un
déménagement ................................................ 23
Instructions spécifiques pour les modèles
vapeur ............................................................. 23
Instructions d’installation..................................... 24
Spécifications ...................................................... 24
Outils et pièces ................................................ 24
Exigences d’emplacement ................................ 25
Raccordement électrique de la sécheuse à
gaz - états-unis et canada ................................. 26
Spécifications de l’alimentation en gaz ............... 27
L’installation......................................................... 28
Exigences d’emplacement ................................ 28
Raccordement au gaz - états-unis et
canada ............................................................ 29
Exigences concernant l’évacuation .................... 30
Planification des circuits de conduits.................. 31
Installation du conduit d’évacuation ................... 32
Raccordement des tuyaux d’alimentation ........... 32
Raccordement du conduit d’évacuation.............. 34
Réglage de l’aplomb de la sécheuse.................. 34
Liste de vérification pour installation
terminée .......................................................... 35
Table des matières
2
DRYER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These
words mean:
DANGER You can be killed or seriously injured if you don't
immediately follow instructions.
WARNING You can be killed or seriously injured if you don’t follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions,
including the following:
�Read all instructions before using the appliance.
�Do not dry articles that have been previously cleaned in,
washed in, soaked in, or spotted with gasoline, dry-cleaning
solvents, or other flammable or explosive substances, as
they give off vapors that could ignite or explode.
�Do not allow children to play on or in the appliance. Close
supervision of children is necessary when the appliance is
used near children.
�Before the appliance is removed from service or discarded,
remove the door to the drying compartment.
�Do not reach into the appliance if the drum is moving.
�Do not install or store this appliance where it will be
exposed to the weather.
�Do not tamper with controls.
�Do not repair or replace any part of the appliance or attempt
any servicing unless specifically recommended in the user-
maintenance instructions or in published user-repair
instructions that you understand and have the skills to carry
out.
�Do not use fabric softeners or products to eliminate static
unless recommended by the manufacturer of the fabric
softener or product.
�Do not use heat to dry articles containing foam rubber or
similarly textured rubber-like materials.
�Clean lint screen before or after each load.
�Keep area around the exhaust opening and adjacent
surrounding areas free from the accumulation of lint, dust,
and dirt.
�The interior of the appliance and exhaust duct should be
cleaned periodically by qualified service personnel.
�Do not place items exposed to cooking oils in your dryer.
Items contaminated with cooking oils may contribute to a
chemical reaction that could cause a load to catch fire. To
reduce the risk of fire due to contaminated loads, the final
part of a tumble dryer cycle occurs without heat (cool down
period). Avoid stopping a tumble dryer before the end of the
drying cycle unless all items are quickly removed and
spread out so that the heat is dissipated.
�Do not use replacement parts that have not been
recommended by the manufacturer (e.g. parts made at
home using a 3D printer).
�See the Installation Instructions for grounding requirements
and installation.
SAVE THESE INSTRUCTIONS
3
WARNING — “Risk of Fire”
−Clothes dryer installation must be performed by a qualified installer.
−Install the clothes dryer according to the manufacturer's instructions and local codes.
−Do not install a clothes dryer with flexible plastic venting materials or flexible metal (foil
type) duct. If flexible metal duct is installed, it must be of a specific type identified by
the appliance manufacturer as suitable for use with clothes dryers. Flexible venting
materials are known to collapse, be easily crushed, and trap lint. These conditions will
obstruct clothes dryer airflow and increase the risk of fire.
−To reduce the risk of severe injury or death, follow all installation instructions.
−Save these instructions.
WARNING
FIRE HAZARD
Failure to follow safety warnings exactly could result in serious injury, death, or property
damage.
Do not install a booster fan in the exhaust duct.
Install all clothes dryers in accordance with the installation instructions of the manufacturer
of the dryer.
WARNING:
FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings exactly could result in serious injury, death, or property
damage.
−Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this
or any other appliance.
−WHAT TO DO IF YOU SMELL GAS:
•Do not try to light any appliance.
•Do not touch any electrical switch; do not use any phone in your building.
•Clear the room, building, or area of all occupants.
•Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s
instructions.
•If you cannot reach your gas supplier, call the fire department.
−Installation and service must be performed by a qualified installer, service agency, or the
gas supplier.
4
WARNING: Gas leaks cannot always be detected by smell.
Gas suppliers recommend that you use a gas detector approved by UL or CSA.
For more information, contact your gas supplier.
If a gas leak is detected, follow the “What to do if you smell gas” instructions.
IMPORTANT: The gas installation must conform with local codes, or in the absence of local codes, with the National Fuel Gas Code,
ANSI Z223.1/NFPA 54, or the National Gas and Propane Installation Code, CSA B149.1.
The dryer must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National Electrical
Code, ANSI/NFPA 70, or the Canadian Electrical Code, Part 1, CSA C22.1.
In the State of Massachusetts, the following installation instructions apply:
�Installation and repairs must be performed by a qualified or licensed contractor, plumber, or gas fitter qualified or licensed by the
State of Massachusetts.
�Acceptable Shut-off Devices: Gas Cocks and Ball Valves installed for use shall be listed.
�A flexible gas connector, when used, must not exceed 4 feet (121.9 cm).
IMPORTANT SAFETY INSTRUCTIONS
WHEN DISCARDING OR STORING YOUR OLD CLOTHES DRYER, REMOVE THE DOOR.
SAVE THESE INSTRUCTIONS
5
DRYER MAINTENANCE AND
CARE
Cleaning the Dryer Location
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as gasoline,
away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Place dryer at least 18 inches (460 mm) above the floor
for a garage installation.
Failure to do so can result in death, explosion, or fire.
Keep dryer area clear and free from items that would block the
airflow for proper dryer operation. This includes clearing piles of
laundry in front of the dryer.
Cleaning the Dryer Interior
To clean dryer drum:
1. Use a mild hand dish detergent mixed at a low concentration
with nonflammable cleaner or very warm water, and rub with a
soft cloth.
�Rinse well with a wet sponge or towel.
�Tumble a load of clean clothes or towels to dry drum.
2. Use a microfiber cloth and hot water in a spray bottle to clean
the drum and a second microfiber towel to dry.
NOTE: Garments that contain unstable dyes, such as denim blue
jeans or brightly colored cotton items, may discolor the rear of the
dryer interior. These stains are not harmful to your dryer and will
not stain future loads of clothes. Dry unstable dye items inside out
to avoid transfer of dye.
Removing Accumulated Lint
From inside the dryer cabinet:
Lint should be removed every 2 years, or more often, depending
on dryer usage. Cleaning should be done by a qualified appliance
service or ventilation system cleaner.
From the exhaust vent:
Lint should be removed every 2 years, or more often, depending
on dryer usage.
Cleaning the Lint Screen
Every load cleaning:
The lint screen may be located either in the door opening or the
top of the dryer depending on model. A screen blocked by lint can
increase drying time.
To clean:
1. Remove the lint screen. If necessary, press the tab to release
and open the lint screen. Roll lint off the screen with your
fingers. Do not rinse or wash screen to remove lint. Wet lint is
hard to remove.
2. Push the lint screen firmly back into place.
IMPORTANT:
�Do not run the dryer with the lint screen loose, damaged,
blocked, or missing. Doing so can cause overheating and
damage to both the dryer and fabrics.
�If lint falls off the screen into the dryer during removal, check
the exhaust hood and remove the lint. See “Venting
Requirements” in the Installation Instructions.
�Clean space where lint screen is located, as needed. Using a
vacuum, gently remove any lint that has accumulated outside
of the lint screen.
As-needed cleaning:
Laundry detergent and fabric softener residue can build up on the
lint screen. This buildup can cause longer drying times for your
clothes, or cause the dryer to stop before your load is completely
dry. The screen is probably clogged if lint falls off while the screen
is in the dryer. Clean the lint screen with a nylon brush every 6
months, or more frequently, if it becomes clogged due to a residue
buildup.
To wash:
1. Roll lint off the screen with your fingers.
2. Wet both sides of lint screen with hot water.
6
3. Wet a nylon brush with hot water and liquid detergent. Scrub
lint screen with the brush to remove residue buildup.
4. Rinse screen with hot water.
5. Thoroughly dry lint screen with a clean towel. Reinstall screen
in dryer.
Changing the Drum Light (on some
models)
1. Unplug dryer or disconnect power.
2. Open the dryer door. Locate the light bulb cover on the back
wall of the dryer. Using a Phillips-head screwdriver or 1/4"
(6.35 mm) nut driver or socket wrench, remove the screw
located in the lower right-hand corner of the cover. Remove
the cover.
3. Turn bulb counterclockwise. Replace the bulb with a 10 W
appliance bulb only. Replace the cover and secure with the
screw.
4. Plug in dryer or reconnect power.
Accessories and replacement parts are available for your model.
For ordering and contact information, please reference your Quick
Start Guide.
Check Your Vent System for Good
Airflow
WARNING
Fire Hazard
Use a heavy metal vent.
Do not use a plastic vent.
Do not use a metal foil vent.
Failure to follow these instructions can result in death or
fire.
Good Airflow
Along with heat, dryers require good airflow to efficiently dry
laundry. Proper venting will reduce your drying times and improve
your energy savings. See Installation Instructions.
The venting system attached to the dryer plays a big role in good
airflow. Blocked or crushed vents as well as improper venting
installation will reduce air flow and dryer performance.
Service calls caused by improper venting are not covered by the
warranty and will be paid by the customer, regardless of who
installed the dryer. To clean or repair venting, contact a venting
specialist.
Maintain Good Airflow
�Cleaning your lint screen before each load.
�Replace plastic or foil vent material with 4" (102 mm) diameter
heavy, rigid vent material.
�Use the shortest length of vent possible.
�Use no more than four 90° elbows in a vent system; each bend
and curve reduces airflow.
�Remove lint and debris from the exhaust hood.
�Remove lint from the entire length of the vent system at least
every 2 years. When cleaning is complete, be sure to follow
the Installation Instructions for final product check.
�Clear away items from the front of the dryer.
7
Nonuse, Storage, and Moving Care
Install and store your dryer where it will not freeze. Because some
water may stay in the hose, freezing can damage your dryer. If
storing or moving your dryer during freezing weather, winterize it.
Nonuse or Storage Care
If you will be on vacation or not using your dryer for an extended
period of time, you should:
1. Unplug dryer or disconnect power.
2. Clean lint screen. See “Cleaning the Lint Screen.”
3. Close shutoff valve in gas supply line.
4. Turn off the water supply to the dryer. This helps to avoid
unintended flooding (due to a water pressure surge) while you
are away.
Moving Care
1. Unplug the power supply cord.
2. Gas models only: Close shutoff valve in gas supply line.
3. Gas models only: Disconnect gas supply line pipe and remove
fittings attached to dryer pipe.
4. Gas models only: Cap the open gas supply line.
5. Steam models only: Shut off water faucet. Disconnect the
water inlet hose from faucet; then drain the hose. Transport
hose separately.
6. Make sure leveling legs are secure in dryer base.
7. Use tape to secure dryer door.
8. On models with base trim, remove base trim before moving
dryer. See “Install and remove base trim (on some models)”
for details.
Special Instructions for Steam
Models
Water Inlet Hose
Replace inlet hose and hose screen after 5 years of use to reduce
the risk of hose failure. Periodically inspect and replace inlet hose
if bulges, kinks, cuts, wear, or leaks are found.
When replacing your inlet hose, record the date of replacement.
To winterize the dryer:
1. Unplug dryer or disconnect power.
2. Shut off water faucet.
3. Disconnect water inlet hose from faucet and drain.
To use the dryer again:
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
1. Flush water pipes. Reconnect water inlet hose to faucet. Turn
on water faucet.
2. Plug in dryer or reconnect power as described in the
Installation Instructions.
Reinstalling the Dryer
Follow the Installation Instructions to locate, level, and connect the
dryer.
INSTALLATION INSTRUCTIONS
REQUIREMENTS
Tools and Parts
NOTE: Install the clothes dryer according to the manufacturer’s
instructions and local codes.
Gather required tools and parts before starting installation. Read
and follow the instructions provided with any tools listed here.
Tools Needed for All Installations:
Flat-blade screwdriver #2 Phillips screwdriver
1/4" and 5 /16" nut driver
Level
8
Pliers or slip-joint pliers Tape measure
Utility knife
Tin snips (new vent
installations)
Caulking gun and compound
(new vent installations)
Adjustable wrench that opens
to 1" (25 mm) or hex-head
socket wrench
Vent clamps Putty knife
8" (203 mm) or 10" (254 mm)
pipe wrench
Wire stripper (direct-wire
installations)
Pipe-joint compound resistant
to propane gas
Parts Supplied (all models):
Leveling legs (4) (Length and appearance of legs may vary
according to model)
Parts package is located in dryer drum. Check that all parts are
included.
NOTE: Do not use leveling legs supplied with dryer if installing
with a pedestal or a stack kit.
Parts Needed (steam models):
“Y” connector 2' (0.6 m) inlet hose
Rubber washer 5' (1.52 m) inlet hose
Parts Needed (not supplied with dryer):
Additional parts may be required, depending on your installation.
Check local codes. Check existing electrical supply and venting.
See “Electrical Requirements” and “Venting Requirements” before
purchasing parts.
Mobile home installations require metal exhaust system hardware
available for purchase from the dealer from whom you purchased
your dryer. For further information, please refer to the Quick Start
Guide for service contact information.
Available Accessories:
Refer to your Quick Start Guide for contact and ordering
information.
9
Location Requirements
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as gasoline,
away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Place dryer at least 18 inches (460 mm) above the floor
for a garage installation.
Failure to do so can result in death, explosion, or fire.
Check code requirements. Some codes limit, or do not permit,
installation of the dryer in garages, closets, mobile homes, or
sleeping quarters. Contact your local building inspector.
You will need:
�A location allowing for proper exhaust installation. See
“Venting Requirements.”
�A separate 15 A or 20 A circuit for gas dryers.
�A grounded electrical outlet located within 2 ft. (610 mm) of
either side of the dryer. See “Electrical Requirements” in the
“Gas Dryer Power Hookup” section.
�A sturdy floor to support dryer and a total weight (dryer and
load) of 200 lbs. (90.7 kg). The combined weight of a
companion appliance should also be considered.
�Level floor with maximum slope of 1" (25 mm) under entire
dryer. If slope is greater than 1" (25 mm), install Extended
Dryer Feet Kit. If not level, clothes may not tumble properly
and automatic sensor cycles may not operate correctly.
Installing on carpet is not recommended.
�For garage installation, place dryer at least 18" (460 mm)
above floor. If using a pedestal, you will need 18" (460 mm) to
bottom of dryer.
�Steam models only: Cold water faucets located within 4 ft.
(1.2 m) of the water fill valves, and water pressure of 20–100
psi (137.9–689.6 kPa). You may use your washer’s water
supply by utilizing the necessary parts noted in “Parts needed.”
�The dryer must not be installed or stored in an area where it
will be exposed to water and/or weather.
IMPORTANT: Do not operate your dryer at temperatures below
45°F (7°C). Lower temperatures may cause dryer not to shut off
at end of automatic sensor cycles, resulting in longer drying times.
Installation clearances:
For each arrangement, consider allowing more space for ease of
installation and servicing, spacing for companion appliances, and
clearances for walls, doors, and floor moldings. Space must be
large enough to allow the door to fully open. Add spacing on all
sides of dryer to reduce noise transfer. If a closet door or louvered
door is installed, top and bottom air openings in door are required.
Spacing for recessed area or closet
NOTE: No other fuel-burning appliance can be installed in the
same closet as a dryer.
The dimensions shown are for the minimum spacing allowed.
�Additional spacing should be considered for ease of
installation and servicing.
�Additional clearances might be required for wall, door, and
floor moldings.
�Additional spacing of 1" (25 mm) on all sides of the dryer is
recommended to reduce noise transfer.
�For closet installation with a door, minimum ventilation
openings in the top and bottom of the door are required.
Louvered doors with equivalent ventilation openings are
acceptable.
�Companion appliance spacing should also be considered.
Minimum installation clearances (dryer only):
Front Sides Rear Top
Recessed NA 0" (0 mm) 0" (0 mm) 0" (0 mm)
Closet NA 0" (0 mm) 0" (0 mm) 0" (0 mm)
Under
Counter
NA 1" (25 mm) 0" (0 mm) 0" (0 mm)
0" (0 mm) rear spacing is allowed for straight-back venting only.
For steam models only, inlet hose must not be kinked.
Mobile Home – Additional installation
requirements
This dryer is suitable for mobile home installations. The
installation must conform to the Manufactured Home Construction
and Safety Standard, Title 24 CFR, Part 3280 (formerly the
Federal Standard for Mobile Home Construction and Safety, Title
24, HUD Part 280) or the Standard for Mobile Homes, CAN/CSA-
Z240 MH.
Mobile home installations require:
�Metal exhaust system hardware, which is available for
purchase from your dealer.
�Mobile Home Installation Hold-Down Kit. See your Quick Start
Guide for more information.
�Special provisions must be made in mobile homes to introduce
outside air into the dryer. The opening (such as a nearby
window) should be at least twice as large as the dryer exhaust
opening.
10
Gas Dryer Power Hookup – U.S.A.
and Canada
Electrical Requirements
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
120 V, 60 Hz, AC-only, 15 A or 20 A fused electrical supply is
required. A time-delay fuse or circuit breaker is recommended. It
is also recommended that a separate circuit serving only this dryer
be provided. Do not use an extension cord.
GROUNDING INSTRUCTIONS
For a grounded, cord-connected appliance:
This appliance must be grounded. In the event of a
malfunction or breakdown, grounding will reduce the risk of
electric shock by providing a path of least resistance for
electric current. This appliance is equipped with a cord having
an equipment-grounding conductor and a grounding plug.
The plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local
codes and ordinances.
WARNING: Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in
doubt as to whether the appliance is properly grounded. Do
not modify the plug provided with the appliance: if it will not fit
the outlet, have a proper outlet installed by a qualified
electrician.
SAVE THESE INSTRUCTIONS
Gas Supply Requirements
WARNING
Explosion Hazard
Use a new CSA International approved gas supply line.
Install a shut-off valve.
Securely tighten all gas connections.
If connected to propane, have a qualified person make
sure gas pressure does not exceed 13 (33 cm) waterʺ
column.
Examples of a qualified person include: licensed heating
personnel, authorized gas company personnel, and
authorized service personnel.
Failure to do so can result in death, explosion, or fire.
Gas Type
Natural Gas:
This dryer is equipped for use with natural gas. It is certified by UL
for use with propane gas with appropriate conversion.
�Your dryer must have the correct burner for the type of gas in
your home. Burner information is located on the rating plate in
the door well of your dryer. If this information does not agree
with the type of gas available, contact your dealer or reference
the contact information listed on your Quick Start Guide.
Propane Gas Conversion:
IMPORTANT: Conversion must be made by a qualified technician.
No attempt shall be made to convert the appliance from the gas
specified on the model/serial rating plate for use with a different
gas without consulting your gas company.
Gas Supply Line
Option 1 (Recommended Method)
Flexible stainless steel gas connector:
�If local codes permit, use a new flexible stainless steel gas
connector (Design-Certified by the American Gas Association
or CSA International) to connect your dryer to the rigid gas
supply line. Use an elbow and a 3/8" flare x 3/8" NPT adapter
fitting between the stainless steel gas connector and the dryer
gas pipe, as needed, to prevent kinking.
Option 2 (Alternate Method)
Approved aluminum or copper tubing:
�Must include 1/8" NPT minimum plugged tapping accessible
for test gauge connection, immediately upstream of the gas
connection to the dryer.
�1/2" IPS pipe is recommended.
�3/8" approved aluminum or copper tubing is acceptable for
lengths under 20 ft. (6.1 m) if local codes and gas supplier
permit.
�If you are using natural gas, do not use copper tubing.
�Lengths over 20 ft. (6.1 m) should use larger tubing and a
different size adapter fitting.
Termékspecifikációk
| Márka: | Maytag |
| Kategória: | Ruhaszárítók |
| Modell: | MGD6630HC |
Szüksége van segítségre?
Ha segítségre van szüksége Maytag MGD6630HC, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Ruhaszárítók Maytag
16 Október 2024
13 Október 2024
13 Október 2024
8 Október 2024
8 Október 2024
8 Október 2024
7 Október 2024
11 Július 2024
10 Július 2024
10 Július 2024
Útmutatók Ruhaszárítók
- Ruhaszárítók Samsung
- Ruhaszárítók Beko
- Ruhaszárítók Electrolux
- Ruhaszárítók Whirlpool
- Ruhaszárítók Grundig
- Ruhaszárítók Candy
- Ruhaszárítók Lamona
- Ruhaszárítók Gorenje
- Ruhaszárítók Bosch
- Ruhaszárítók Indesit
- Ruhaszárítók Zanussi
- Ruhaszárítók AEG
- Ruhaszárítók Sharp
- Ruhaszárítók Teka
- Ruhaszárítók Hoover
- Ruhaszárítók Hisense
- Ruhaszárítók Siemens
- Ruhaszárítók Miele
- Ruhaszárítók Insignia
- Ruhaszárítók Klarstein
- Ruhaszárítók Smeg
- Ruhaszárítók Orima
- Ruhaszárítók Etna
- Ruhaszárítók Bauknecht
- Ruhaszárítók Amana
- Ruhaszárítók Hotpoint
- Ruhaszárítók Haier
- Ruhaszárítók Frigidaire
- Ruhaszárítók Pelgrim
- Ruhaszárítók Russell Hobbs
- Ruhaszárítók Thor
- Ruhaszárítók Bush
- Ruhaszárítók Orbegozo
- Ruhaszárítók Daewoo
- Ruhaszárítók Balay
- Ruhaszárítók Hotpoint Ariston
- Ruhaszárítók GE
- Ruhaszárítók Caple
- Ruhaszárítók Simpson
- Ruhaszárítók Asko
- Ruhaszárítók Ignis
- Ruhaszárítók Koenic
- Ruhaszárítók Blomberg
- Ruhaszárítók Fisher & Paykel
- Ruhaszárítók Kenmore
- Ruhaszárítók Cylinda
- Ruhaszárítók Philco
- Ruhaszárítók Zerowatt
- Ruhaszárítók Zanker
- Ruhaszárítók Tricity Bendix
- Ruhaszárítók Nordland
- Ruhaszárítók John Lewis
- Ruhaszárítók Mabe
- Ruhaszárítók Iberna
- Ruhaszárítók Castor
- Ruhaszárítók Hoover-Helkama
- Ruhaszárítók Defy
- Ruhaszárítók Schulthess
- Ruhaszárítók Otsein-Hoover
- Ruhaszárítók White Knight
- Ruhaszárítók Nordmende
- Ruhaszárítók Wascomat
- Ruhaszárítók Elba
- Ruhaszárítók Ansonic
- Ruhaszárítók Kelvinator
- Ruhaszárítók Saivod
- Ruhaszárítók Speed Queen
- Ruhaszárítók WhiteLine
- Ruhaszárítók Creda
- Ruhaszárítók Bendix
- Ruhaszárítók Altus
- Ruhaszárítók Protech
Legújabb útmutatók Ruhaszárítók
16 Január 2025
16 Január 2025
14 Január 2025
14 Január 2025
14 Január 2025
14 Január 2025
13 Január 2025
13 Január 2025
13 Január 2025
13 Január 2025