Használati útmutató Matrix E7xi

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Matrix E7xi (60 oldal) a Cross edző kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/60
ASCENT TRAINER® | SUSPENSION ELLIPTICAL
TRAINER OWNER’S MANUAL
E7xi
E7xe
E5x
E3x
A7xi
A7xe
A5x
A3x
2
3 IMPORTANT PRECAUTIONS
9 ELLIPTICAL & ASCENT ASSEMBLY
25 LOCATION & SETUP
27 TROUBLESHOOTING & MAINTENANCE
31 ELLIPTICAL & ASCENT OPERATION
51 ELLIPTICAL & ASCENT WORKOUTS
57 PRODUCT SPECIFICATIONS
3
IMPORTANT PRECAUTIONS
SAVE THESE INSTRUCTIONS
When using an Ascent Trainer or Suspension Elliptical Trainer, basic precautions should always be followed, including the
following: Read all instructions before using this product. It is the responsibility of the owner to ensure that all users of this
product are adequately informed of all warnings and precautions. If you have any questions after reading this guide, contact
Customer Tech Support at the number listed on the back panel of the OWNER’S MANUAL.
This product is intended for commercial use. To ensure your safety and protect the equipment, read all instructions
before operating.
5
The unit should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting
on or taking off parts.
Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to
persons.
Connect this exercise product to a properly grounded outlet only.
At NO time should pets or children under the age of 14 be closer to the unit than 10 feet.
At NO time should children under the age of 14 use the unit.
Children over the age of 14 or disabled persons should not use the unit without adult supervision.
Use the unit only for its intended use as described in the unit guide and owner’s manual.
Do not use other attachments that are not recommended by the manufacturer. Attachments may cause injury.
Never operate the unit if it has a damaged cord or plug, if it is not working properly, if it has been dropped or
damaged, or immersed in water. Call Customer Tech Support for examination and repair.
Keep power cord away from heated surfaces. Do not carry this unit by its supply cord or use the cord as a handle.
Never operate the unit with the air opening blocked. Keep the air opening clean, free of lint, hair, and the like.
To prevent electrical shock, never drop or insert any object into any opening.
Do not operate where aerosol (spray) products are being used or when oxygen is being administered.
To disconnect, turn all controls to the off position, then remove plug from outlet.
Do not use unit in any location that is not temperature controlled, such as but not limited to garages, porches, pool
rooms, bathrooms, car ports or outdoors. Failure to comply may void the warranty.
Do not remove the console covers unless instructed by Customer Tech Support. Service should only be done by
an authorized service technician.
Heart rate monitoring systems may be inaccurate.
Over exercising may result in serious injury or death.
If you feel faint, stop exercising immediately.
WARNING
6
It is essential that your unit is used only indoors, in a climate controlled room. If your unit has been exposed to colder
temperatures or high moisture climates, it is strongly recommended that the unit is warmed up to room temperature before
first time use. Failure to do so may cause premature electronic failure.
CONSULT A PHYSICIAN BEFORE USING THIS EQUIPMENT.
READ OWNER’S MANUAL BEFORE USE.
CAUTION
DEDICATED CIRCUIT AND ELECTRICAL INFO
A “Dedicated Circuit” means that each outlet you plug into should not have anything else running on that same circuit. The
easiest way to verify this is to locate the main circuit breaker box, and turn off the breaker(s) one at a time. Once a breaker has
been turned off, the only thing that should not have power to it are the units in question. No lamps, vending machines, fans,
sound systems, or any other item should lose power when you perform this test.
Non-looped (isolated) neutral/grounding means that each circuit must have an individual neutral/ground connection coming
from it, and terminating at an approved earth ground. You cannot “jumper” a single neutral/ground from one circuit to the next
ELECTRICAL REQUIREMENTS
For your safety and to ensure good unit performance, the ground on this circuit must be non-looped (isolated). Please refer to
NEC article 210-21 and 210-23. Any alterations to the standard power cord provided could void all warranties of this product.
The A3x, E3x, A5x, E5x, A7xe and E7xe are designed to be self powered and do not require an external power supply source
to operate. Without an external power supply, the console’s start-up time may be delayed. Add-on TV’s and other console
accessories will increase the time needed for start-up. An external power supply will ensure power is provided to the console at
all times and is recommended when add-on accessories are used.
For units with an integrated TV (like the 7xe and 7xi), the TV power requirements are included in the unit. An RG6 coaxial cable
with ‘F Type’ compression fittings on each end will need to be connected to the cardio unit and the video source. Additional
power requirements are not needed for the add-on digital TV (3x and 5x). For units with an add-on PCTV (3x and 5x), the TV
power requirements are separate.
NOTE: ALL UNITS WITH VIRTUAL ACTIVE™ MUST BE POWERED!
9
ELLIPTICAL & ASCENT ASSEMBLY
There are several areas during the assembly process that special attention must be
paid. It is very important to follow the assembly instructions correctly and to make sure
all parts are firmly tightened. If the assembly instructions are not followed correctly,
the unit could have parts that are not tightened and will seem loose and may cause
irritating noises. To prevent damage to the unit, the assembly instructions must be
reviewed and corrective actions should be taken.
Before proceeding, find the unit’s frame serial number located on the stabilizer bar
as shown in the illustration and enter it in the space provided below. The console
serial number is located on a barcode sticker on the console, near the connection
between the console and the mast.
ENTER YOUR SERIAL NUMBERS AND MODEL NAME IN THE BOXES BELOW:
» Use the information above for initial setup and when calling for service.
WARNING FRAME SERIAL NUMBER LOCATION
FRAME SERIAL NUMBER:
CONSOLE SERIAL NUMBER:
MODEL NAME:
MATRIX
CONSOLE SERIAL NUMBER LOCATION

Termékspecifikációk

Márka: Matrix
Kategória: Cross edző
Modell: E7xi

Szüksége van segítségre?

Ha segítségre van szüksége Matrix E7xi, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Cross edző Matrix

Matrix

Matrix A50 Útmutató

23 Szeptember 2024
Matrix

Matrix E5x Útmutató

29 Július 2024
Matrix

Matrix E7xi Útmutató

21 Július 2024
Matrix

Matrix E30 Útmutató

14 Július 2024
Matrix

Matrix A30 Útmutató

12 Július 2024
Matrix

Matrix E50 Útmutató

11 Július 2024
Matrix

Matrix C50 Útmutató

9 Július 2024
Matrix

Matrix A3x Útmutató

9 Július 2024

Útmutatók Cross edző

Legújabb útmutatók Cross edző