Használati útmutató Martin Thrill Compact Par Mini LED

Martin Megkönnyebbülés Thrill Compact Par Mini LED

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Martin Thrill Compact Par Mini LED (2 oldal) a Megkönnyebbülés kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/2
THRILL Compact PAR Mini LED
User Guide
WARNING!
Read the Safety and Installation Guide supplied
with this product before installing or using this
product.
Fixture overview
1
Multi-function bracket
7
DMX Out
2
LED emitters
8
AC Mains in
3
Hand wheel
9
Secondary attachment
point
4
IR receiver
10
control panel
5
DMX IN
11
AC Mains out
6
Microphone
12
Clamp attachment point
Using the control menu
The control menu is shown below. To
access the menu, press the MENU
button. Scroll through options with the ▼
(down) and (up) buttons. Press ENTER to select an option. ▲
To return to a higher level in the menu, press MENU. To exit the
menu, press and hold MENU or wait a few seconds.
The default menu settings are shown in . bold
Menu
Sub-menu






 











Set Master fixtures

 -




Show selection off

Select preprogrammed show.




Select auto-trigger speed from
1-8





Toggle sound activation on/off


Set microphone sensitivity





Black out if DMX lost

Run stand-alone show

Hold last values if no DMX





-
Toggle display on/off


Inverted/normal display


Manual mode, select effect
and set level from 0 to 255.






Run fixture test routine

Readout fixture hours

Readout firmware version


Reset to default values
DMX mode operation and settings
DMX channel mode ( )




The Compact PAR Mini LED has 2 DMX modes that use 3 or 6
channels. The 3 channel mode provides color mixing with 0-
100% control of each color; red, green, blue.
In 6-channel mode, the Compact PAR Mini LED provides
color mixing, 36 popular preset colors, full-range dimming, and
strobe effects. The DMX command tables list all functions and
their values.
To set 3 channel or 6 channel DMX mode:
Press MENU to enter the control menu.
Scroll to . Press ENTER to confirm.
Scroll to the desired mode:  or .
Press ENTER to save your selection.
DMX address ( )




A DMX controller uses either 3 or 6 DMX channels to control the
Compact PAR Mini LED. The DMX address is the first channel
used. If fixtures are set to 6 channel DMX mode and the first
fixture’s DMX address is set to 1, then it receives instructions on
DMX channels 1, 2, 3, 4, 5, and 6. The next fixture could then
be set to a DMX address of 7.
For independent control, each fixture must have its own unique
control channels. For symmetric control, identical fixtures can be
set to the same DMX address.
Assign an address for the fixture on the DMX controller. Then set
that address on the Compact PAR Mini LED as follows:
1. Press MENU to enter the control menu.
2. Scroll to . Press ENTER. 
3. Scroll to the address that you assigned to the fixture.
Press ENTER to save the address .
DMX state ( )




The fixture runs in DMX mode whenever it receives DMX
signals. When there is no DMX signal, the fixture can be set to
run in Show Mode ( ), black out ( ), or hold the last  
DMX values received ( ). For Show Mode operation, DMX
state must be set to 


.
To select behavior when there is no DMX signal:
Select  in the control menu and press ENTER.
Select the desired behavior: , , or .
Press ENTER to save your selection.
DMX commands, 3 Channel Mode
Ch.
Value
Function
DMX commands, 6 Channel Mode
Ch.
Value
Function
1
0-7
8- 15
16 131-
132 139-
140 181-
182 189-
190 231-
232 239-
240 247-
248 255-
Shutter
Closed
Open
Strobe, slow to fast
Open
Pulse, fast close/slow open
Open
Pulse, slow close/fast open
Open
Random strobe
Open
2
0- 255
Dimmer, intensity 0-100%
3
0- 255
Red, intensity 0-100%
4
0- 255
Green, intensity 0-100%
5
0- 255
Blue, intensity 0-100%
6
0- 10
11 15-
16 20-
21 25-
26 30-
31 35-
36 40-
41 45-
46 50-
51 55-
56 60-
61 65-
66-70
71 75-
76 80-
81 85-
86 90-
91 95-
96-100
Color presets
Off
Color 1
Color 2
Color 3
Color 4
Color 5
Color 6
Color 7
Color 8
Color 9
Color 10
Color 11
Color 12
Color 13
Color 14
Color 15
Color 16
Color 17
Color 18
Ch.
Value
Function
6
101-105
106-110
111-115
116-120
121-125
126-130
131-135
136-140
141-145
146-150
151-155
156-160
161-165
166-170
171-175
176-180
181-185
186-190
191-192
193-214
215-221
222-243
244-247
248-251
252-255
Color 19
Color 20
Color 21
Color 22
Color 23
Color 24
Color 25
Color 26
Color 27
Color 28
Color 29
Color 30
Color 31
Color 32
Color 33
Color 34
Color 35
Color 36
Off (no preset color)
Continuous color scroll,
fast to slow
Color scroll stop
Reverse color scroll,
slow to fast
Random colors, fast
Random colors, medium
Random colors, slow
Show mode operation and settings
Show mode lets you run a standalone light show without a DMX
controller Shows can be triggered by sound, or automatically .
triggered at eight speeds.
To enable Show Mode operation, set the DMX state setting
to



.
Show selection ( )




Four shows are available. select a preprogrammed show: To
Press MENU to enter the control menu.
1. Scroll to and press ENTER. 
2. Select and press ENTER. 
3. Select a show from to , or select to disable   
Show Mode. Press ENTER.
Music trigger ( )



 







The fixture’s built-in microphone triggers effect and color
changes in sync with music. To enable sound activation:
1. Select  in the control menu and press ENTER.
2. Select  to enable sound activation or  to disable it.
3. Press ENTER to save your selection.
To adjust microphone sensitivity for the volume of the music:
1. Turn on the music source and set it to the desired volume.
2. Select in the control menu and press ENTER. 
3. Press or to decrease or increase the sensitivity level. ▼ ▲
4. When the fixture responds as desired, press ENTER.
Auto trigger speed ( )




To use auto trigger in Show Mode:
1. Turn off sound activation as described above.
2. Select  in the control menu and press ENTER.
3. Scroll to . Press ENTER.
4. Select a trigger speed from 1 (slow) to 8 (fast). Press
ENTER.
Master/slave mode operation and settings
Up to 32 Compact PAR Mini LEDs can be linked in a chain and
set to master/slave operation, where the first Compact PAR Mini
LED controls in the chain is set to operate as the “master” that
the others. This provides synchronized operation without a
controller .
1
2
4
7
3
5
6
9
11
12
10
8
1
0- 255
Red 0-100%
2
0- 255
Green 0- 100%
3
0- 255
Blue 0-100%
Note: There must be no more than one master in the chain.
Set all other connected fixtures to operate as slaves.
To set the first fixture to be the master:
1. Enter the control menu and scroll to . Press ENTER.
2. Scroll to . Press ENTER.
3. Set show mode options as described above.
To set other fixtures as slaves:
1. Enter the control menu and scroll to . Press ENTER.
2. Scroll to . Press ENTER.
Link the master and slave fixtures in a chain, using DMX cable to
connect each fixture’s DMX OUT socket to the next fixture’s DMX
IN socket as described in the Safety and Installation Guide.
Other settings
LED display on/off (



)
To set the control panel’s LED display to be on all the time, or to
automatically sleep when not in use:
1. Select  in the control menu and press ENTER.
2. Select  and press ENTER.
3. Select  (display on) or  (display off when not in use).
4. Press ENTER to save your selection.
LED display inversion ( )




To invert the control panel’s LED display for easier reading:
1. Select  in the control menu and press ENTER.
2. Select  and press ENTER.
3. Select to invert the display.
4. Press ENTER to save your selection or MENU to escape.
Manual mode ( )




Effects can be set from the control panel. To keep the effect
settings, do not exit the menu.
See the 6-channel mode DMX table for command values. To set
effects from the control panel:
1. Enter the control menu and scroll to . Press ENTER.
2. Scroll to the color or effect to adjust. Press ENTER.
3. Press or ▼ ▲ to specify a value from 0 to 255 for the effect.
4. Press ENTER to set the effect.
5. Press MENU and repeat for the other colors or effects.
Auto test ( )




To test all of the fixture functions select and press ENTER. 
Press MENU to exit the test routine.
Fixture readouts
Hours: select To display the fixture’s total operating hours 
and press ENTER. Press MENU to exit.
Firmware: To display the firmware version number,
select and press ENTER. Press MENU to exit. 
Settings reset
To return all user settings to the factory default values, select
 in the control menu. Press ENTER to confirm or MENU to
escape.
Remote control operation
The remote control works with all Compact PAR Mini LED
fixtures within range.
To operate the Compact PAR Mini LED with the remote control:
Verify that the fixture is not connected to a DMX controller.
Press MENU to enter the control menu.
1. Scroll to and press ENTER. 
2. Select and press ENTER. 
3. Select to disable Show Mode. Press ENTER  .
4. To execute commands, point the remote control towards the
front of the fixture and the press corresponding button. See
table below.
Remote Control Commands
Replacing the wireless remote control battery
The wireless remote control uses a single CR 2025
coin/button/cell 3 V lithium battery. To replace the battery:
1. Depress the battery tray lock on the reverse of the remote
control and slide out the battery tray. Remove the old
battery .
2. Insert a fresh battery with the positive terminal towards the
back of the remote. A diagram on the remote control
indicates the correct orientation.
3. Align the battery tray to the remote control and re-insert the
tray ensuring that the locking mechanism is secure.
4. Dispose of used batteries in accordance with local
regulations.
If the coin/button/cell battery compartment does not close
securely, stop using the product and keep it away from children
and animals. Contact Martin Professional for Service and
Support.
Troubleshooting
Symptom
Potential Causes
Remedies
No light from
fixture, control
panel dead
Power supply issue
such as blown fuse,
faulty connector or
damaged cable
Ensure that the mains
supply is connected
and supplying power to
the fixture
Check all power
connections and
cables
Check and if
necessary replace the
fuse
Fixture does not
respond to DMX
control
Fault in the DMX
network due to
connector or cable
damage, incorrect
DMX addressing, or
signal interference
Ensure that fixture’s
DMX address matches
address set on DMX
control device
Check DMX cables
and connections
Ensure that DMX link
is terminated
Reduce number of
fixtures on DMX link
Attempt to control the
fixture with another
DMX control device
Move or shield link if it
is close to unshielded
high-voltage cables
Fixture does not
respond in Show
Mode
Fixture set to run as
slave
Change master/slave
setting master
Sound trigger
disabled
Enable sound trigger
Show Mode disabled
or no show selected
Change DMX state
setting to Show Mode
Select a show
Microphone
sensitivity too low
Increase sensitivity

Fixtures don’t
respond in
master/slave
mode
Fixture receiving
multiple control
signals
Disconnect or turn off
DMX controller
Verify there is only one
fixture master fixture
No master fixture
Set first fixture in chain
as master
Fixture does not
respond to remote
control
Remote control out
of range
Move closer to fixture
Battery exhausted
Replace battery
Incorrect menu
settings
Verify show mode is
disabled ( -  = )
Button
Function
BL
Toggle LEDs on/off
SP
Adjust speed (4 levels). Use with JU, FA, and SU.
Dimming (4 levels)
FL
Strobe (4 speeds)
R
Adjust Red intensity (off, 4 levels)
G
Adjust Green intensity (off, 4 levels)
B
Adjust Blue intensity (off, 4 levels)
W
no function
A
no function
UV
no function
JU
Jump Mode – snaps thru pre-programmed colors. Adjust
speed with SP.
FA
Fade Mode fades thru pre-programmed colors. Adjust –
speed with SP.
AU
Auto-trigger mode.
SU
Music-triggered Sound Mode. Adjust sensitivity level with
SP.
CM+
Next color
CM-
Previous color
Information subject to change without notice. HARMAN
Professional Denmark ApS disclaims liability for any injury,
damage, direct or indirect loss, consequential or economic loss
or any other loss occasioned by the use of, inability to use or
reliance on the information contained in this document.
©2017 HARMAN Professional Denmark ApS. All rights
reserved. Martin® is a registered trademark of HARMAN
Professional Denmark ApS registered in the United States and/or
other countries. Features, specific-ations, and appearance are
subject to change without notice.
HARMAN Professional Denmark ApS
Olof Palmes Allé 18 • 8200 Aarhus N • Denmark
www.martin.com
Document revision: A
IN INOUT OUT IN OUT IN OUT

Termékspecifikációk

Márka: Martin
Kategória: Megkönnyebbülés
Modell: Thrill Compact Par Mini LED

Szüksége van segítségre?

Ha segítségre van szüksége Martin Thrill Compact Par Mini LED, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Megkönnyebbülés Martin

Martin

Martin Thrill Compact Par Mini LED Útmutató

29 December 2024
Martin

Martin ERA 700 Performance IP Útmutató

27 Augusztus 2024
Martin

Martin Thrill Vertical Fogger Útmutató

21 Augusztus 2024
Martin

Martin Extube Útmutató

20 Augusztus 2024
Martin

Martin MUM Útmutató

20 Augusztus 2024
Martin

Martin Freekie Útmutató

20 Augusztus 2024
Martin

Martin P3-100 Útmutató

19 Augusztus 2024
Martin

Martin THRILL Multi-FX LED Útmutató

19 Augusztus 2024
Martin

Martin Fixture Beam Analyzer Útmutató

19 Augusztus 2024
Martin

Martin MAC Ultra Wash Útmutató

19 Augusztus 2024

Útmutatók Megkönnyebbülés

Legújabb útmutatók Megkönnyebbülés

NUVO

NUVO Ballerina 60/1265 Útmutató

5 Április 2025
NUVO

NUVO SF77/196 Útmutató

5 Április 2025
NUVO

NUVO Ballerina 60/329 Útmutató

5 Április 2025
NUVO

NUVO Cordello 60/7883 Útmutató

5 Április 2025
NUVO

NUVO Destin 60/7706 Útmutató

5 Április 2025
NUVO

NUVO Livingston 60/7669 Útmutató

5 Április 2025
NUVO

NUVO Terrace 60/7747 Útmutató

5 Április 2025
NUVO

NUVO 65/220 Útmutató

5 Április 2025
NUVO

NUVO Halter 60/7692 Útmutató

5 Április 2025
NUVO

NUVO Everton 60/7877 Útmutató

5 Április 2025