Használati útmutató Martin THRILL Compact PAR 64 LED

Martin Megkönnyebbülés THRILL Compact PAR 64 LED

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Martin THRILL Compact PAR 64 LED (3 oldal) a Megkönnyebbülés kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/3

THRILL Compact PAR 64 LED

User Guide

WARNING!

Read the Safety and Installation Guide

supplied with this product before

installing or using this product.

Fixture overview

Multi-function bracket

AC Mains out

LED emitters

DMX In

Hand wheel

Secondary attachment point

IR receiver

User interface

AC Mains in

DMX Out

Microphone

Clamp attachment point

Using the control menu

The control menu is shown below. To

access the menu, press the MENU

button. Scroll through options with the ▼

(down) and ▲ (up) buttons. Press ENTER to select an option.

To return to a higher level in the menu, press MENU. To exit the

menu, press and hold MENU or wait a few seconds.

The default menu settings are shown in . bold

Sub-menu

Explanation







Set DMX address



 





Select 6-channel DMX mode



Select 9-channel DMX mode







Set xtures Client







Set Master xture









Show mode o



Select preprogrammed show.









Select auto-trigger speed from

1-8







Toggle sound activation on/o





Set microphone sensitivity







Black out if DMX lost



Run stand-alone show mode



Hold last values if no DMX









Toggle display on/o





Inverted/normal display





Manual mode, select eect and

set level from 0 to 255.



















Run xture test routine



Readout xture hours



Readout rmware version





Reset to default values

DMX mode operation and settings

DMX channel mode ( )









The Compact PAR 64 LED has 2 DMX modes that use 6 or 9

channels. The 6-channel mode provides color mixing with 0-100%

control of each color: red, blue green, amber, white, and UV.

In 9-channel mode, the Compact PAR 64 LED provides color

mixing, 36 popular preset colors, full-range dimming, and strobe

effects. The DMX command tables list all functions and their values.

To set 6-channel or 9-channel DMX mode:

1. Press MENU to enter the control menu.

2. Scroll to . Press ENTER to conrm.

3. orScroll to the desired mode:  .

4. Press ENTER to save your selection.

DMX address ( )









A DMX controller uses either 6 or 9 DMX channels to control the

Compact PAR 64 LED. The DMX address is the rst channel

used. If xtures are set to 6-channel DMX mode and the rst

xture’s DMX address is set to 1, then it receives instructions on

DMX channels 1, 2, 3, 4, 5, and 6. The next xture could then

be set to a DMX address of 7.

For independent control, each xture must have its own unique

control channels. For symmetric control, identical xtures can be

set to the same DMX address.

Assign an address for the xture on the DMX controller. Then set

that address on the Compact PAR 64 LED as follows:

1. Press MENU to enter the control menu.

2. Scroll to . Press ENTER.

3. Scroll to the address that you assigned to the xture.

4. Press ENTER to save the address.

DMX state ( )









The xture runs in DMX mode whenever it receives DMX

signals. When there is no DMX signal, the xture can be set to

run in Show Mode ( ), black out ( or hold the last  ),

DMX values received ( ).  For Show Mode operation, DMX

state must be set to 



.

To select behavior when there is no DMX signal:

1. Select in the control menu and press ENTER.

2. Select the desired behavior: , or .,  

3. Press ENTER to save your selection.

DMX commands, 6-Channel Mode

Ch.

Value

Function

0-255

Red 0- 100%

0-255

Green 0- 100%

0-255

Blue 0- 100%

0-255

Amber 0- 100%

0-255

White 0- 100%

0-255

UV 0- 100%

DMX commands, 9-Channel Mode

Ch.

Value

Function

0-7

8-15

16-131

132 139-

140 181-

182 189-

190 231-

232 239-

240 247-

248 255-

Shutter

Closed

Open

Strobe, slow to fast

Open

Pulse, fast close/slow open

Open

Pulse, slow close/fast open

Open

Random strobe

Open

0-255

Dimmer, intensity 0- 100%

0-255

Red, intensity 0- 100%

0-255

Green, intensity 0-100%

0-255

Blue, intensity 0-100%

0-255

Amber, 0-100%

0-255

White, 0-100%

0-255

UV, 0-100%

0-10

11 15-

16 20-

21 25-

26 30-

31 35-

36 40-

41 45-

46 50-

51 55-

56 60-

61 65-

66-70

71 75-

76 80-

81 85-

86 90-

91 95-

96 100-

101 105-

106 110-

111 115-

116 120-

121 125-

126 130-

131 135-

136 140-

141 145-

146 150-

Color presets

O

Color 1

Color 2

Color 3

Color 4

Color 5

Color 6

Color 7

Color 8

Color 9

Color 10

Color 11

Color 12

Color 13

Color 14

Color 15

Color 16

Color 17

Color 18

Color 19

Color 20

Color 21

Color 22

Color 23

Color 24

Color 25

Color 26

Color 27

Color 28

Ch.

Value

Function

151 155-

156 160-

161 165-

166 170-

171 175-

176 180-

181 185-

186 190-

191 192-

193 214-

215 221-

222 243-

244 247-

248 251-

252 255-

Color 29

Color 30

Color 31

Color 32

Color 33

Color 34

Color 35

Color 36

O (no preset color)

Continuous color scroll, fast to slow

Color scroll stop

Reverse color scroll, slow to fast

Random colors, fast

Random colors, medium

Random colors, slow

Show mode operation and settings

Show mode lets you run a standalone light show without a DMX

controller. Shows can be triggered by sound, or automatically

triggered at eight speeds.

To enable Show Mode operation, set the DMX state setting to







.

Show selection ( )









Four shows are available. To select a preprogrammed show:

1. Press MENU to enter the control menu.

2. Scroll to and press ENTER.

3. Select and press ENTER.

4. Select a show from to , or select to disable  

Show Mode. Press ENTER.

Music trigger ( and )











 









The fixture’s built-in microphone triggers eect and color

changes in sync with music. To enable sound activation:

1. Select in the control menu and press ENTER.

2. Select to enable sound activation or to disable it. 

3. Press ENTER to save your selection.

To adjust microphone sensitivity for the volume of the music:

1. Turn on the music source and set it to the desired volume.

2. Select in the control menu and press ENTER.

3. Press ▼ or ▲ to decrease or increase the sensitivity level.

4. When the xture responds as desired, press ENTER.

Auto trigger speed ( )





To use auto trigger in Show Mode:

1. Turn o sound activation as described above.

2. Select in the control menu and press ENTER.

3. Scroll to . Press ENTER.

4. Select a trigger speed from 1 (slow) to 8 (fast). Press ENTER.

Master/client mode operation and settings

Up to 32 Compact PAR 64 LEDs can be linked in a chain and set to

master/ operation, where the rst Compact PAR 64 LED in client

the chain is set to operate as the “master” that controls the others.

This provides synchronized operation without a controller. Note:

There must be no one the chain.more than master in Set all

other connected xtures to operate . as clients

To the xture be master: set rst to the

1. Enter the and scroll Press control menu to . ENTER.

2. Scroll Press to . ENTER.

3. Set show as described mode options above.

To other xtures as :set clients

1. Enter the and scroll Press control menu to . ENTER.

2. Scroll Press to . ENTER.

Link the master and xtures in a chain, using DMX cable toclient

connect each fixture’s DMX OUT socket to the next fixture’s

DMX IN socket as described in the Safety and Installation Guide.

Other settings

LED display on/o ( )





To set the control panel’s LED display to be on all the time, or to

automatically sleep when not in use:

1. Select in the control menu and press ENTER.

2. Select and press ENTER.

3. Select (display on) or (display o when not in use). 

4. Press ENTER to save your selection.

LCD display inversion ( )





To invert the control panel’s LED display for easier reading:

1. Select in the control menu and press ENTER.

2. Select and press ENTER.

3. Select to invert the display.

4. Press ENTER to save your selection or MENU to escape.

Manual mode ( )





Eects can be set from the control panel. To keep the eect

settings, do not exit the menu.

See the 9-channel mode DMX table for command values. To set

eects from the control panel:

1. Enter the control menu and scroll to . Press ENTER.

2. Scroll to the color or eect to adjust. Press ENTER.

3. Press ▼ or ▲ to specify a value from 0 to 255 for the effect.

4. Press ENTER to set the eect.

5. Press MENU and repeat for the other colors or eects.

Auto test ( )









To test all of the xture functions select and press 

ENTER. Press MENU to exit the test routine.

Fixture readouts

Hours: To display the fixture’s total operating hours select 

and press ENTER. Press MENU to exit.

Firmware: To display the rmware version number, select 

and press ENTER. Press MENU to exit.

Settings reset

To return all user settings to the factory default values, select

 in the control menu. Press ENTER to conrm or MENU to

escape.

Remote control operation

The remote control works with all Compact PAR 64 LED xtures

within range.

To operate the Compact PAR 64 LED with the remote control:

1. Verify that the xture is not connected to a DMX controller.

2. Press MENU to enter the control menu.

3. Scroll to and press ENTER.

4. Select and press ENTER.

5. Select to disable Show Mode. Press ENTER .

6. To execute commands, point the remote control towards the

front of the xture and the press corresponding button. See

table below.

Remote Control Commands

Replacing the wireless remote control battery

The wireless remote control uses a single CR 2025

coin/button/cell 3 V lithium battery. To replace the battery:

1. Depress the battery tray lock on the reverse of the remote

control and slide out the battery tray. Remove the old battery.

2. Insert a fresh battery with the positive terminal towards the

back of the remote. A diagram on the remote control

indicates the correct orientation.

3. Align the battery tray to the remote control and re-insert the

tray ensuring that the locking mechanism is secure.

4. Dispose of used batteries in accordance with local regulations.

If the coin/button/cell battery compartment does not close securely, stop

using the product and keep away from children and animals. Contact

Martin Professional for service and support.

Troubleshooting

Symptom

Potential Causes

Remedies

No light from

xture, control

panel dead

Power supply issue

such as blown fuse,

faulty connector or

damaged cable

Ensure that the mains

supply is connected

and supplying power

to the xture

Check all power

connections and

cables

Check and if

necessary replace the

fuse

Fixture does not

respond to DMX

control

Fault in the DMX

network due to

connector or cable

damage, incorrect

DMX addressing, or

signal interference

Ensure that fixture’s

DMX address

matches address set

on DMX control

device

Check DMX cables

and connections

Ensure that DMX link

is terminated

Reduce number of

xtures on DMX link

Attempt to control the

xture with another

DMX control device

Move or shield link if it

is close to unshielded

high-voltage cables

Fixture does not

respond in Show

Mode

Fixture set to run

as client

Change master/

client setting master

Sound trigger

disabled

Enable sound trigger

Show Mode disabled

or no show selected

Change DMX state

setting to Show Mode

Select a show

Microphone

sensitivity too low

Increase sensitivity



Fixtures don’t

respond in

master/client

mode

Fixture receiving

multiple control

signals

Disconnect or turn o

DMX controller

Verify there is only

one xture master

xture

No master xture

Set rst xture in

chain as master

Fixture does not

respond to remote

control

Remote control out of

range

Move closer to xture

Battery exhausted

Replace battery

Incorrect menu

settings

Verify show mode is

disabled ( - )  = 

Button

Function

Toggle LEDs on/o

Adjust speed (4 levels). Use with JU, FA, and SU.

Dimming (4 levels)

Strobe (4 speeds)

Adjust Red intensity (o, 4 levels)

Adjust Green intensity (o, 4 levels)

Adjust Blue intensity (o, 4 levels)

Adjust White intensity (o, 4 levels)

Adjust Amber intensity (o, 4 levels)

Adjust UV intensity (o, 4 levels)

Jump Mode snaps thru pre-programmed colors. –

Adjust speed with SP.

Fade Mode Fades thru pre-programmed colors. –

Adjust speed with SP.

Auto-trigger mode.

Music-triggered Sound Mode. Adjust sensitivity level

with SP.

CM+

Next color

CM-

Previous color

Information subject to change without notice. HARMAN

Professional Inc. disclaims liability for any injury, damage, direct

or indirect loss, consequential or economic loss or any other loss

occasioned by the use of, inability to use or reliance on the

information contained in this document.

registered trademark of HARMAN Professional Inc. registered in the

United States and other countries. Features, specications, and

appearance are subject to change without notice.

HARMAN Professional Inc.

8500 Balboa Boulevard • Northridge, CA, USA • 91329

www.martin.com

Document revision: B

IN INOUT OUT IN OUT IN OUT

Termékspecifikációk

Márka:	Martin
Kategória:	Megkönnyebbülés
Modell:	THRILL Compact PAR 64 LED

Szüksége van segítségre?

Ha segítségre van szüksége Martin THRILL Compact PAR 64 LED, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók Megkönnyebbülés Martin

Martin Thrill Compact Par Mini LED Útmutató

29 December 2024

Martin ERA 700 Performance IP Útmutató

27 Augusztus 2024

Martin Thrill Vertical Fogger Útmutató

21 Augusztus 2024

Martin Extube Útmutató

20 Augusztus 2024

Martin MUM Útmutató

20 Augusztus 2024

Martin Freekie Útmutató

20 Augusztus 2024

Martin P3-100 Útmutató

19 Augusztus 2024

Martin THRILL Multi-FX LED Útmutató

19 Augusztus 2024

Martin Fixture Beam Analyzer Útmutató

19 Augusztus 2024

Martin MAC Ultra Wash Útmutató

19 Augusztus 2024

Útmutatók Megkönnyebbülés

Legújabb útmutatók Megkönnyebbülés

Bresser BR-2240 Útmutató

4 Április 2025

Bresser BR-6RGB Mini Tube Útmutató

4 Április 2025

Bresser BR-2246 Útmutató

4 Április 2025

NUVO Clarksville 60/8064 Útmutató

3 Április 2025

WAC Lighting Tube Architectural DS-WS05-F27B-BK Útmutató

3 Április 2025

WAC Lighting Tube Architectural DS-WS06-F27A-BK Útmutató

3 Április 2025

WAC Lighting Cylinder WS-W190208-30-BK Útmutató

3 Április 2025

WAC Lighting Tube Architectural DS-WD06-F27C-BK Útmutató

3 Április 2025

WAC Lighting Nightvision WS-W42020-BK/GO Útmutató

3 Április 2025

Sonneman Fino Duo 3779 Útmutató

3 Április 2025