Használati útmutató Martin ELP Zoom Lens

Martin Megkönnyebbülés ELP Zoom Lens

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Martin ELP Zoom Lens (1 oldal) a Megkönnyebbülés kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/1
ELP ZOOM LENS
Installation and Safety Manual
Installation
1. Rotate zoom lens (1) 45 degrees from home position and connect to the ELP body*
2. Rotate zoom lens (2) back to secure to the ELP body into home position.
3. Tighten the screws (3) and (4) to lock into position.
4. Tighten screws (5) at both sides to prevent sideways . movement
*Home position is identified by the Martin logo positioned on the side of the zoom lens as shown in the diagram above
Securing with a safety cable
Secure the fixture with a safety cable (or other secondary attachment) that is approved for the
weight of the fixture so that the safety cable will hold the fixture if the primary attachment fails.
Loop the safety cable through the attachment eye at the rear of the fixture and at the front of
the lens tube (see illustration below) around a secure anchoring point.
If a safety cable attachment point becomes damaged or deformed, do not use the fixture.
Return it to a Martin Service Centre for repair.

Termékspecifikációk

Márka: Martin
Kategória: Megkönnyebbülés
Modell: ELP Zoom Lens

Szüksége van segítségre?

Ha segítségre van szüksége Martin ELP Zoom Lens, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Megkönnyebbülés Martin

Útmutatók Megkönnyebbülés

Legújabb útmutatók Megkönnyebbülés