Használati útmutató Marantz MOUNT20BL
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Marantz MOUNT20BL (6 oldal) a Beamer kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/6
Model MOUNT20 User Guide
For 11/ /15 eries VP- 12 S Projector
MOUNT20
PROJECTOR MOUNT
INSTALLATION INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE INSTALLING EQUIPMENT
This product was designed and manufactured to meet strict
quality and safety standards. There are, however, some
installation and operation precautions which you should be
particularly aware of.
1.
Read instructions -
All the safety and operating instructions
should be read before the product is operated.
2.
Retain instructions -
The safety and operating instructions
should be retained for future reference.
3.
Heed warnings -
All warnings on the product and in the
operating instructions should be adhered to.
4.
Follow instructions -
All installation instructions should
be followed.
5.
Use only the parts provided with the mount, along with any
parts (commercially available) that are specified in this manual.
6.
Do not modify the mount or the parts provided with the mount.
7.
Do not use damaged parts. if any parts become damaged,
contact your dealer.
8.
All bolts and screws must be tightened securely.
9.
Make sure not to block any ventilation openings when installing
the projector.
11.
Once the projector is installed, safety checks should be conducted
on a regular basis.
10.
Special techniques and experience are required when installing
the projector with this mount. Contact your dealer to install the
projector for you.
Warning
Hardware List
Adjustment Ranges and Load Allowances
The ceiling should be capable of supporting a weight
of at least five (5) times the projector(s) weight.
If it cannot, the ceiling must be reinforced. Proper
installation procedure by qualified personnel as outlined
in the installation instructions must be adhered to.
Failure to do so could result in serious personal injury.
Step 1
Step 2
Figure 2
Figure 1
1
2 3 3
4
3
33
3
2
Wire
Access
14"
8 5/8"
Base Plate Connectors #1
Projector Mount Ceiling Plate 1
Plate 1
Plate 2
Base Plate Connectors #1 and Projector Mount Ceiling
Plate 1 with
ceiling mounting holes #2.
Horizontal Adjustment Plate 2 (Base Plate Connector
Holes #3).
2
Ceiling Wire
Access
7 5/8"
10 5/8"
Insert Base Plate connectors #1 into the lateral positioning slots
#3 as shown in
#4 from the underside of Plate 1. The lateral positioning
slots will give you 2 1/4" inches of lateral adjustment for projector
alignment.
4
Base plate connector holes #3 provide 15 degrees of horizontal
rotation adjustment.
Attach horizontal adjustment Plate 2 to projector mount ceiling
Plate 1 using the four (4) 3/8" (inch) nuts and washers provided.
1. Four (4) 3/8 (inch) nuts
2. Four (4) 3/8 (inch) flat washers
3. Two (2) 8 (mm) screws
4. Eleven (11) 6 (mm) screws
5. Eight (8) 6 (mm) rubber washers
6. One (1) Ceiling Mount #1
7. Two (2) Base Plate Connectors
8. One (1) Horizontal Tilt Plate #2
9. One (1) Horizontal Tilt Plate #3
10. One (1) Projector Plate #4
Horizontal Tilt (yaw) +/- 10 degrees
Vertical Tilt (tilt) +/- 20 degrees
Rotation +/- 15 degrees
Lateral Shift +/- 2 1/4 inches
Maximum Load Allowance 450 Lbs.
MOUNT20 PROJECTOR MOUNT INSTALLATION INSTRUCTIONS continued
Step 3
Step 2 B
Step 3 B
Figure 3
Figure 4 Figure 6
Figure 5
Step 4
Wire
Access
Wire
Access
1
3
1
2
2
2
2
2 2
2
2
2
3
1
3
Plate 3 Plate 4
Plates 1 & 2 Plate 3
Horizontal Adjustment Plate 2 (Figure 2) attached to
Projector Mount Ceiling Plate 1.
Horizontal Tilting Plate 3 Projector Mounting Plate 4
Install the combined plates (above) securely to the ceiling
structure in accordance with local commercial building
standards.
Use suitable hardware in adequate quantity and size depending
on the installation requirements. (Please note that Projector
VP-12SX weighs 28.6 lbs. (13 kgs).
Attach Horizontal Tilting Plate 3 to the previously combined
plates (already installed on ceiling) using the two (2) 8 (mm)
screws and four (4)
6
(mm) screws provided, as indicated
in Figure
4. Install two (2) 6 (mm) screws with rubber
spacers and
metal washers into the welded metal studs
(indicated #1).
Holes for 6mm screws
Holes for 8mm screws
Holes for 6mm screws with rubber washer and steel washer
Indicates Forward
Positioning of Mount
Indicates Forward
Positioning of Mount
Tilting Capability
Tilting Capability
Horizontal Tilting Plate 3 Attached to Plates 1 and 2.
The newly combined Plate 3 provides 10 0 degrees of
horizontal tilt. When positioned, tighten with screws
provided.
12 1/4"
17"
continued over
Invert the projector and place it on a soft and flat
surface. Align the three (3) rubber spacers provided
with the three (3) 6(mm) mounting holes on the
projector and secure with three (3) 6(mm) screws
provided.
mounting holes
Termékspecifikációk
| Márka: | Marantz |
| Kategória: | Beamer |
| Modell: | MOUNT20BL |
Szüksége van segítségre?
Ha segítségre van szüksége Marantz MOUNT20BL, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Beamer Marantz
30 Július 2024
16 Július 2024
12 Július 2024
3 Július 2024
Útmutatók Beamer
- Beamer Samsung
- Beamer Sony
- Beamer Acer
- Beamer LG
- Beamer Philips
- Beamer Panasonic
- Beamer Canon
- Beamer JVC
- Beamer Sharp
- Beamer Lenovo
- Beamer Casio
- Beamer Toshiba
- Beamer HP
- Beamer Hisense
- Beamer BenQ
- Beamer Medion
- Beamer Xiaomi
- Beamer Dell
- Beamer Klarstein
- Beamer Prixton
- Beamer Polaroid
- Beamer Technaxx
- Beamer Ricoh
- Beamer Eurolite
- Beamer Epson
- Beamer Asus
- Beamer Hama
- Beamer Renkforce
- Beamer Mitsubishi
- Beamer GPX
- Beamer Hitachi
- Beamer Kodak
- Beamer Optoma
- Beamer Smart
- Beamer Dahua Technology
- Beamer Viewsonic
- Beamer Livoo
- Beamer Smart Tech
- Beamer XGIMI
- Beamer OK
- Beamer Auna
- Beamer Nebula
- Beamer ZTE
- Beamer Showtec
- Beamer Futurelight
- Beamer Overmax
- Beamer Kogan
- Beamer D-Link
- Beamer ION
- Beamer Blaupunkt
- Beamer 3M
- Beamer Pyle
- Beamer Sanyo
- Beamer Steinel
- Beamer Salora
- Beamer Lenco
- Beamer Maxell
- Beamer Leica
- Beamer Barco
- Beamer NEC
- Beamer Cameo
- Beamer Krüger&Matz
- Beamer RCA
- Beamer OKI
- Beamer Adj
- Beamer Anker
- Beamer Microtek
- Beamer Celexon
- Beamer Vivitek
- Beamer EasyMaxx
- Beamer Elmo
- Beamer Planar
- Beamer Smartwares
- Beamer Speaka
- Beamer Vogel's
- Beamer Acco
- Beamer Aiptek
- Beamer ASK Proxima
- Beamer Reflecta
- Beamer Yaber
- Beamer Da-Lite
- Beamer Steren
- Beamer Eiki
- Beamer Derksen
- Beamer InFocus
- Beamer Bauer
- Beamer Naxa
- Beamer Emtec
- Beamer Celly
- Beamer Promethean
- Beamer Odys
- Beamer Stairville
- Beamer Laserworld
- Beamer Ibm
- Beamer La Vague
- Beamer Tzumi
- Beamer EKO
- Beamer MicroVision
- Beamer Elite Screens
- Beamer Fun Generation
- Beamer Christie
- Beamer PLUS
- Beamer Varytec
- Beamer AOpen
- Beamer Ultimea
- Beamer Dracast
- Beamer Dukane
- Beamer Dream Vision
- Beamer Knoll
- Beamer DTS
- Beamer Touchjet
- Beamer Boxlight
- Beamer AAXA Technologies
- Beamer Miroir
- Beamer Vankyo
- Beamer Mimio
- Beamer AWOL Vision
- Beamer Atlantis Land
- Beamer KickAss
- Beamer VAVA
- Beamer Beghelli
- Beamer Panamorph
- Beamer Mirabella Genio
Legújabb útmutatók Beamer
2 Április 2025
15 Január 2025
14 Január 2025
13 Január 2025
12 Január 2025
12 Január 2025
12 Január 2025
11 Január 2025
11 Január 2025
11 Január 2025