Használati útmutató Makita UT1600

Makita Kézi turmixgép UT1600

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Makita UT1600 (48 oldal) a Kézi turmixgép kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/48
GB Hand-Held Mixer Original Instructions
F Batteur mélangeur Notice originale
D Rührgerät Originalbetriebsanleitung
I Miscelatore manuale Istruzioni originali
NL Roerinrichting Oorspronkelijke gebruiksaanwijzing
E Agitador manual Instrucciones de servicio originales
P Misturadora de Mão Instruções Originais
DK Røreværk Original brugsanvisning
GR Αναµεικτήρας Ελληνική µετάφραση
UT 1
401
UT 1600
Technical data
UT 1401
Rated voltage:
110 V ~
230 V ~
110 V
Power input:
1050 W
1300 W
15
Rated speed:
I
II
0–250 rpm
0–450 rpm
0–
210
0–
480
Frequency: 50 Hz
Tool holder:
M 14
Safety class:
II
Safety degree:
IP 20
Weight according to EPTA
Procedure 01/2003: 5,5 kg
This manual shall be subject to modification without prior not
developments and technical progress.
Note: The technical data may differ depending on the country.
Symbols
The following symbols are used for the equipment. It is impo
meaning before you use the tool.
Intended use
The mixer is used to stir and mix UT 1401
prefab plaster, gyps
and other building materials of medium and high viscosity in b
The diameter of the stirrers that are used should not exceed 14
The mixer UT 1600
is designed for use in mixing material of
as prefab mortar and plaster, cement, lime, concrete, quartz
-
screed, pastes, sealing compounds as well as gypsum and gr
up to 80 kg. The diameter of the
mixing agitators must not
180mm.
The user shall be responsible for damages caused by inapprop
Generally accepted accident prevention regulations and the
enclosed shall be observed.
ENGLISH
Read instructions
Work with concentration and care.
Keep your workplace clean and avoid hazardous
Precautions shall be taken to protect operators.
Double protective insulation
UT 1600
V ~
230 V ~
0 W
1800 W
rpm
rpm
0–250 rpm
0–580 rpm
7,1 kg
ice in the course of
ortant to know their
sum, lime, concrete
batches up to 50 kg.
40mm.
high viscosity, such
-
filled epoxy resins,
anulates in batches
exceed a value of
priate use.
safety instructions
s situations.
Power supply
The machine shall only be connected to the voltage stated on the type plate and it
only works with single-phase AC voltage. It is provided with double protective
insulation according to European standards and thus, it may be also connected to
sockets without ground cable.
Do only use extension cables with sufficient cross section. A cross section that is
too small may lead to excessive loss of power and overheating of the tool and the
cable.
Safety Instructions
WARNING!
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future reference.
ADDITIONAL SAFETY RULES FOR THIS MACHINE:
1. If the connecting cable is damaged or cut during work, do not touch it and
immediately disconnect the power plug. In any case, do not work with the
tool if the connecting cable is damaged.
2. The tool should not be humid and it should not be operated in a humid
environment.
3. Do not use the tool to mix explosive or easily inflammable substances and
do not use it in areas close to these substances.
4. Do not use the cable to carry the tool.
5. Do always inspect the tool, the cable and the plug before using it. Repairs
shall only be carried out by an expert. The plug shall only be connected to
the socket if the tool is switched off.
6. Do only operate the tool outdoor with a residual current circuit breaker with
a maximum of 30 mA.
7. Do not leave the hand-held mixer running unattended.
8. Do disconnect the power plug and check if the hand-held mixer is switched
off when it is left unattended, e.g. during assembly and disassembly work,
voltage drop, insertion and/or assembly of accessories.
9. Do switch off the tool if it stops to operate due to whatever cause in order to
avoid a sudden start of operation when it is unattended.
10. Do always lead the cable away behind the tool.
11. Do not use the tool if a part of the housing and/or the switch, cable or plug is
damaged.
12. Power tools shall be inspected by an expert regularly.
13. Do not touch rotating parts.
14. Be careful with long hair. Do not wear loose clothing.
15. Do not manipulate the tool.
16. Do ensure that the handle bars are dry, clean and free from oil and grease.
17. When the tool is operated manually, make sure that you always hold the
tool with both hands and you stand in a firm position. Be aware of the
reaction moment of the tool.

Termékspecifikációk

Márka: Makita
Kategória: Kézi turmixgép
Modell: UT1600

Szüksége van segítségre?

Ha segítségre van szüksége Makita UT1600, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Kézi turmixgép Makita

Makita

Makita UT2204 Útmutató

15 Szeptember 2024
Makita

Makita UT1600 Útmutató

2 Augusztus 2024
Makita

Makita UT1200 Útmutató

20 Július 2024
Makita

Makita UT1401 Útmutató

20 Július 2024
Makita

Makita UT121 Útmutató

13 Július 2024

Útmutatók Kézi turmixgép

Legújabb útmutatók Kézi turmixgép

Bosch

Bosch ErgoMixx MFQ36451 Útmutató

8 Április 2025
Girmi

Girmi SB42 Útmutató

6 Április 2025
KitchenAid

KitchenAid 5KHBRV71 Útmutató

1 Április 2025
Black Decker

Black Decker MX1500W Útmutató

31 Március 2025
Sencor

Sencor SHM 9130WH Útmutató

25 Március 2025
Sencor

Sencor SHB 9130WH Útmutató

25 Március 2025
Alto

Alto PBM4 Sistema Útmutató

16 Január 2025
Alto

Alto L-12 Útmutató

16 Január 2025
Alto

Alto S-12 Útmutató

16 Január 2025
Alto

Alto DJM-2 Útmutató

16 Január 2025