Használati útmutató Luxul AMS-2600

Luxul kapcsoló AMS-2600

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Luxul AMS-2600 (8 oldal) a kapcsoló kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/8
READ ME FIRST
QUICK INSTALL GUIDE
AV Series 26-Port Gigabit
Managed Switch
AMS-2600
Includes:
AMS-2600 26-Port Gigabit Managed Switch
Rack Mount Kit
Rubber Feet
Power Cable
SETUP AND CONFIGURATION
1
Physical Installation
The AMS-2600 can be rack-mounted or used as a desktop switch. Install the
AMS-2600 in a stable/safe place to avoid any possible damage. Avoid place-
ment in direct sunlight. Do not place heavy articles on the AMS-2600 and verify
the ground connection of the outlet is functioning properly.
Desktop/Shelf Installation
For desktop/shelf installation, attach the four rubber feet to the corner inden-
tations on the bottom of the AMS-2600, then place the switch horizontally
on a solid, level platform.
Rack Installation
Use the included L brackets for convenient installation in a 19-inch server or
audio/video rack. Use four screws to attach the L-shaped brackets on both
sides of the AMS-2600 as shown below, then install the switch horizontally in
the rack. Use your desired hardware to ax the switch brackets to the rack.
Attach Feet for Desktop Installation Install Brackets for Rack-Mounting
2
Connecting Ethernet and Power
Ethernet and Power Connections
Use any RJ-45 to connect the AMS-2600 to an Ethernet-enabled device,
including servers, routers or other switches. No crossover cable is necessary.
The AMS-2600 supports 10/100/1000 Mbps Ethernet; 10/100 Mbps half/
full-duplex mode and 1000 Mbps full-duplex mode.
nNote: Luxul recommends at least Cat-5e unshielded twisted pair
(CAT5e UTP) cabling. To ensure best performance and stable data
transmission at 1000 Mbps, use Category-6 unshielded twisted pair
(CAT6 UTP).
Use the included power cable to connect the AMS-2600 to a surge protect-
ed outlet. The AC input socket and a power switch are on the rear panel.
The built-in power supply supports 100~240VAC at 50/60Hz.
cCAUTION: Use only the correct power cord for your environment.
Any voltage other than standard 100/240 will result in
damage to the AMS-2600.

Termékspecifikációk

Márka: Luxul
Kategória: kapcsoló
Modell: AMS-2600

Szüksége van segítségre?

Ha segítségre van szüksége Luxul AMS-2600, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók kapcsoló Luxul

Útmutatók kapcsoló

Legújabb útmutatók kapcsoló