Használati útmutató Lumens OIP-D40D

Lumens nincs kategorizálva OIP-D40D

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Lumens OIP-D40D (22 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/22
To download the latest version of Quick Start
Guide, multilingual user manual, software, or
driver, etc., please visit Lumens
https://www.MyLumens.com/support
OIP-D40E/D4 0D
AVoIP Encoder/AVoIP Decoder
User Manual - English
[Important]
1
Table of Contents
Chapter 1 Package Contents .................................................................... 2
1.1 -D40E Encoder OIP .......................................................................................... 2
1.2 -D40D Decoder OIP .......................................................................................... 2
Chapter 2 Product Overview .................................................................... 3
2.1 Overview .......................................................................................................... 3
2.2 Product Applications ...................................................................................... 3
2.3 System Requirements 3 ....................................................................................
2.4 I/O Functions Introduction ............................................................................. 4
2.5 Description of Indicator Display .................................................................... 6
2.6 IR Pin Assignment Conguration .................................................................. 6
2.7 Serial Port Pin and Default Setting ................................................................ 6
Chapter 3 Installation and Connections .................................................. 7
3.1 Connection diagram 7 .......................................................................................
3.2 Connection Setting ......................................................................................... 8
Chapter 4 Start Using ................................................................................ 9
4.1 Network Switch Setting .................................................................................. 9
4.2 WebGUI Control Methods ............................................................................... 9
Chapter 5 WebGUI Control Menu ........................................................... 10
5.1 WebGUI Control Menu Descriptions ...........................................................10
Chapter 6 Product Specications .......................................................... 17
6.1 nical Specications Tech .............................................................................. 17
6.2 Image Specications ....................................................................................17
6.3 Audio Specications ..................................................................................... 18
6.4 Wire Specications ....................................................................................... 18
Chapter 7 Troubleshooting .................................................................... 19
Chapter 8 Safety Instructions ................................................................ 20
Copyright Information ............................................................................... 21
2
Chapter 1 Package Contents
1.1 OIP-D40E Encoder
OIP-D40E
Encoder
Instruction for
installation
5 V/2.6 A
Power supply
(including a
multinational
adapter)
3.5 mm
male to D-Sub
female adapter
cable
3.5 mm to
infrared emitter
3.5 mm to
infrared extender
Foot mats
(A set of four)
1.2 OIP-D40D Decoder
OIP-D40D
Decoder
Instruction for
installation
5 V/2.6 A
Power supply
(including a
multinational
adapter)
3.5 mm
male to D-Sub
female adapter
cable
3.5 mm to
infrared emitter
3.5 mm to
infrared extender
Foot mats
(A set of four)
3
Chapter 2 Product Overview
2.1 Overview
This product is an HDMI over IP encoder/decoder, which can extend and receive HDMI signals
through a Cat.5e network cable under TCP/IP protocol. This product supports HD images
(1080p@60Hz) and audio data, and the transmission distance can be 100 meters. If it is equipped
with a Gigabit network switch, it can not only extend the transmission distance (up to 100 meters for
each connection), but also receive VoIP signals without loss or delay.
In addition to supporting IR and RS- -directional transmission, this product also supports 232 bi
Multicast of VoIP signals, which can send the audio-visual signals of one encoder to multiple
decoders in the same area network. In addition, the VoIP signals with multicast can also be used to
build a large video wall composed of multiple displays. This product is perfectly suitable for home
use and commercial audio-visual installation environments, and has a screen display function to
quickly check setting information. The control interface includes WebGUI, Telnet and AV over IP
controllers.
2.2 Product Applications
HDMI, IR and RS-232 signal extension
Multi-screen broadcast displays in restaurants or conference centers
Use connection to long-distance transmit data and images
Matrix image distribution system
Video wall image distribution system
2.3 System Requirements
HDMI audio-visual source devices, such as digital media players, video game consoles, PCs or
set-top boxes.
A Gigabit network switch supports Jumbo Frame (at least 8K Jumbo Frames).
A Gigabit network switch supports Internet Group Management Protocol (IGMP) Snooping.
<Remark>
Most consumer-grade routers cannot handle the high traic ow generated by multicast, so it is not
recommended to directly use the router as your network switch.
It is strongly recommended to avoid mixing your commonly used network trac with VoIP streaming ow.
VoIP streaming ow should at least use a separate subnet.
4
2.4 I/O Functions Introduction
2.4.1 OIP-D40E Encoder - Front Panel
NO
Function Descriptions
①
Display the status of the device. Please refer to 2.5 Description of
Indicator Display.
②
Display the status of connection. Please refer to 2.5 Description of
Indicator Display.
③
Press this button to restart the device (all settings will be retained).
④
Press this button to switch image stream to Graphic or Video image
processing modes.
Graphic mode: Optimizing high-resolution static images.
Video mode: Optimizing full motion images.
<Remark> In the unplugged state, press and hold this button, and
then insert the power. When the POWER and LINK
indicators ash at the same time, it means the factory
settings have been restored (it takes 15~30 seconds).
Then, release the button, and restart the device.
⑤
For manufacturers only.
⑥
For manufacturers only. The default position of this switch is OFF.
2.4.2 OIP-D40E Encoder - Rear Panel
NO
Function Descriptions
⑦
Plug in a 5V DC power supply and connect to an AC outlet.
⑧
Connect to a network switch to serially connect compatible decoders
and transmit data, while being able to use WebGUI/Telnet control.
⑨
Connect to a computer, laptop or control equipment to extend the
RS-232 signals. The default baud rate is 115200 bps, which can be
set by users.
<Remark>With Multicast, the encoder can send RS-232 commands
to all decoders, and individual decoders can send RS-232 commands
to the encoder.
⑩
After connecting to IR extender, aim at the remote control to extend
the IR control range of the remote control to the far ends.
<Remark>With Multicast, the encoder can send IR signals to all
decoders.
⑪
After connecting to IR emitter, aim at the controlled device to send the
received IR signals from the remote control to the controlled device.
⑫
Connect to HDMI source devices, such as digital media players,
5
video game consoles, or set-top boxes.
2.4.3 OIP-D40D Decoder - Front Panel
NO
Function Descriptions
①
Display the status of the device. Please refer to 2.5 Description of
Indicator Display.
②
Display the status of connection. Please refer to 2.5 Description of
Indicator Display.
③
Press this button to restart the device (all settings will be retained).
④
For manufacturers only.
⑤
For manufacturers only. The default position of this switch is OFF.
⑥
(1) Channel -: Press this button to switch to the previous available
streaming channel in the local network.
<Remark>If the device does not detect an available streaming channel,
its channel number will not be changed.
(2) Image Connection: Press this button for 3 seconds to enable or
disable image connection. When image connection is disabled, the
displays connected to the decoder will show the current IP address and
the rmware version of the system.
⑦
(1) Channel +: Press this button to switch to the next available streaming
channel in the local network.
<Remark>If the device does not detect an available streaming channel,
its channel number will not be changed.
(2) Image Stream: Press this button to switch image stream to Graphic or
Video image processing modes.
Graphic mode: Optimizing high-resolution static images.
Video mode: Optimizing full motion images.
<Remark> In the unplugged state, press and hold this button, and then
insert the power. When the POWER and LINK indicators
ash at the same time, it means the factory settings have
been restored (it takes 15~30 seconds). Then, release the
button, and restart the device.
2.4.4 OIP-D40D Decoder - Rear Panel
6
NO
Function Descriptions
⑧
Connect to HDMI display or audio-visual amplier to output digital
images and audio.
⑨
Connect to a computer, laptop or control equipment to extend the
RS-232 signals. The default baud rate is 115200 bps, which can be set
by users.
<Remark>With Multicast, the encoder can send RS-232 commands to
all decoders, and individual decoders can send RS-232 commands to
the encoder.
⑩
After connecting to IR extender, aim at the remote control to extend the
IR control range of the remote control to the far ends.
⑪
After connecting to IR emitter, aim at the controlled device to send the
received IR signals from the remote control to the controlled device.
<Remark>With Multicast, the encoder can send IR signals to all
decoders.
⑫
Connect to a network switch to serially connect compatible encoders and
transmit data, while being able to use WebGUI/Telnet control.
⑬
Plug in a 5V DC power supply and connect to an AC outlet.
2.5 Description of Indicator Display
Name
Indicator Status
Power indicator
Flickering: Receiving power
Stays On: Ready
Connection indicator
O: No internet connection
Flickering: Connecting
Stays On: Connection is stable
2.6 IR Pin Assignment Conguration
2.7 Serial Port Pin and Default Setting
3.5 mm male to D-Sub female adapter cable
Default Setting of the Serial Port
Baud Rate
115200
Data Bit
8
Parity Bit
N
Stop Bit
1
Flow Control
N
IR extender
IR
Power
Grounding
IR emitter
Power
IR
Without
connection
7
Chapter 3 Installation and Connections
3.1 Connection diagram
Video display device
Media player
RS-232 connection
Network Switch
HDMI Input
HDMI
O utput
Serial Control Device
HDTV
IR Input
Serial Control Device
Power Supply
IR I nput
IR Output
IR Output
RS-232 connection
Power Supply
O -D50C IP
HDMI
O utput
8
3.2 Connection Setting
① Use an HDMI cable to connect the video source device to the HDMI input port on the
D40E encoder.
② Use an HDMI cable to connect the video display device to the HDMI output port on the
D40D decoder.
③ Use a network cable to connect the OIP network port of the D40E encoder, D40D
decoder, and D50C controller to the network switch of the same domain, so that all OIP
devices are in the same local area network.
④ Plug the transformer into the power ports of D40E encoder, D40D decoder and D50C
controller and connect to the power outlet.
※ Steps can extend the signal. You can enter the IP address of the encoder or ① ④-
decoder on the browser to control the encoder or decoder individually. Or use the
WebGUI operation interface to control the video display device connected to the D50C
controller, which can simultaneously control all encoders and decoders currently
connected to the same local network.
You can also connect to a computer and IR emitter/receiver. Please refer to the following
connection methods:
⑤ Connect a computer, laptop or control device to the RS-232 port to extend the RS-232
signal.
⑥ Connect the IR emitter/receiver to the D40E encoder and D40D decoder to receive IR
from the remote control, and use the remote control to control the controlled device.
9
Chapter 4 Start Using
VoIP transmission will consume a lot of bandwidth (especially at higher resolutions), and it needs to
be paired with a Gigabit network switch that supports Jumbo Frame and IGMP Snooping. It is
strongly recommended to be equipped with a switch which includes VLAN (Virtual Local Area
Network) professional network management.
4.1 Network Switch Setting
Notes
Most consumer-grade routers cannot handle the high trac ow generated by multicast, so it is not
recommended to directly use the router as your network switch. It is strongly recommended to avoid
mixing your commonly used network trac with VoIP streaming ow. VoIP streaming ow should at
least use a separate subnet.
Setting Suggestions
Please set Port Frame Size (Jumbo Frame) to 8000.
Please set IGMP Snooping and relevant settings (Port, VLAN, Fast Leave, Querier) to . [Enable]
4.2 WebGUI Control Methods
4.2.1 WebGUI control via D40E encoder/D40D decoder
The encoder and decoder have their own WebGUI interface. Open a standard web page
browser, enter the IP address of the device, and log in to the WebGUI interface to connect to
the encoder or decoder you d like to operate. If you don t know the IP address, temporarily stop ’ ’
the VoIP streaming connection between the encoder and the decoder rst. Please press the
LINK button on the front panel of the decoder for 3 seconds (the LINK indicator ickers quickly
then is o), and check the IP address on the display connected to the decoder.
Once the VoIP streaming is disconnected, the decoder will output a 640 x 480 black screen,
and a set of local (equal to the decoder) IP address will be shown at the bottom of the screen,
and a set of remote (equal to encoder) IP address sharing the same VoIP transmission channel
(the channel number is preset to 0). After obtaining the IP address, please press the LINK
button again for 3 seconds to restore the original operating state of the device (the LINK
indicator lights up rst and then stays on).
After logging in to the WebGUI interface, you will see a window composed of several tabs.
Please click the button at the top of the window to check the content of each tab. For each tab
and its function, please refer to . 5.1 WebGUI Control Menu Descriptions
4.2.2 WebGUI control via theD50C controller
To activate the WebGUI connection of D50C controller, please open a web page browser, and
enter the IP address of the CTRL LAN port of D50C controller, or connect the display to the
HDMI output port, and connect the keyboard and mouse to the USB port for easy operation.
Whether it is controlled on a web page browser or on a display, all encoders and decoders
connected to the same local network can be controlled on the control page at the same time.
For the description of the D50C WebGUI control menu, please refer to the OIP-D50C User
Manual.
10
Chapter 5 WebGUI Control Menu
5.1 WebGUI Control Menu Descriptions
This chapter describes the WebGUI control menu of D40E encoder/D40D decoder. To use the
WebGUI control page of D50C controller to control the device, please refer to OIP-D50C User
Manual.
5.1.1 System - Version Information
Description
This window will show detailed information about the current rmware version of the device.
5.1.2 System Upgrade the Firmware –
Description
To upgrade the rmware of this device, please press , select the updated le (*.bin format) from [Choose File]
your computer, and then press to start the update. [Upload]
<Remark>The update process will take a few minutes to complete, and the device will automatically restart during
the process. When updating, the video output may become unsteady.
Dencoder
Dencoder
11
5.1.3 System - Utility Program
No
Item
Description
1
Commands
To restore the factory default settings of the device, please press [Factory Default]. If
you only need to restart the device (settings will not be reset), please press [Reboot].
2
Reset EDID to
Default Value
If the EDID data from the decoder is not compatible with the HDMI signal source,
please select the built-in HDMI EDID setting from the encoder (supports 1080p
resolution, including audio) to solve the compatibility problem, and then press [Apply].
<Remark>If restart the device, the EDID setting will be reset.
* The decoder operation interface does not have this function.
3
Console API
Command
To send a Telnet command to the device, enter the Telnet command in the
Command eld, and then press [Apply]. The device s response to the command will ’
be shown on the Output eld.
<Remark>To check Telnet commands, please refer toOIP-D40E.D40D Telnet
Command List.
5.1.4 System - Statistics
Description
This window will display the current operating status of the device, including host name, network information, MAC
address, unicast or multicast, and connection status and mode.
1
2
3
Dencoder
Dencoder

Termékspecifikációk

Márka: Lumens
Kategória: nincs kategorizálva
Modell: OIP-D40D

Szüksége van segítségre?

Ha segítségre van szüksége Lumens OIP-D40D, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nincs kategorizálva Lumens

Lumens

Lumens OIP-D50E Útmutató

3 Szeptember 2024
Lumens

Lumens CamConnect Pro Útmutató

3 Szeptember 2024
Lumens

Lumens OIP-N60D Útmutató

3 Szeptember 2024
Lumens

Lumens DC132U Útmutató

1 Szeptember 2024
Lumens

Lumens CL511 Útmutató

31 Augusztus 2024
Lumens

Lumens VS-KB21 Útmutató

31 Augusztus 2024
Lumens

Lumens OIP-D40E Útmutató

29 Augusztus 2024
Lumens

Lumens OIP-D40D Útmutató

24 Augusztus 2024
Lumens

Lumens OIP-D50D Útmutató

24 Augusztus 2024
Lumens

Lumens OIP-D50C Útmutató

24 Augusztus 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

Planet

Planet PWR-240-48 Útmutató

9 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
Alpine

Alpine DP2-40C-BC Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025
IFM

IFM PG1704 Útmutató

9 Április 2025
Daikin

Daikin EKWCTRDI1V3 Útmutató

9 Április 2025
Simplified MFG

Simplified MFG SP18CAT120 Útmutató

9 Április 2025