Használati útmutató Lorus W110

Lorus óra W110

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Lorus W110 (4 oldal) a óra kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/4

SPORTS

■ CHARACTE R I S T ICS

1. Time /c a le n da r disp la y : Hour, minutes,

seconds, month, date and day of the week.

•A u t oma t i c ca l e n d a r : Calendar adjusts

automatically for odd and even months

except February of leap years.

•T im e indi c a t i on : Changeover between

12- and 24-hour indications is possible.

2 . S t o p w a t c h : Measures up to 30 hours

with 1 1,000 second readout./

Split time measurement is available.

3 . C o u n t d o w n t i m e r : Up to 99 hours and

59 minutes can be set in minutes.

4 . 3 - c h a n n e l a l a r m : The alarm can be set

to ring at three different times a day.

•H ou r ly t im e s ign a l: Can be set to ring

every hour on the hour.

5. Du al t im e: Time of a different time zone

can be set and displayed.

6 . Illumin atin g lig ht: The light illuminates

the display in the dark.

■

HOW TO S E T THE TIME/CALEND AR

1. Press button “A” to show the time/calendar

display.

2. Press button “B” to show the time/calendar

setting display. The second digits start

flashing.

3. Selection of the digits to be adjusted (flashing)

is made in the following order by pressing

button “C”.

HourSeconds

N o t e s :

1. When setting the hour digits in the 12-

hour indication, check that AM/PM is properly

set. Only “P” (PM) mark is displayed and

there is no indication for the AM setting.

In the 24-hour indication, “24” (24-hour

indication) mark is displayed.

Se c onds s ettin g

When the seconds digits are flashing, press

button “D” in accordance with a time signal.

The seconds are reset to “00” and start immediately.

When the seconds coun t any n umber from

“30” to “59” and button “D” is pressed, one

minute is added and the seconds are immediately

reset to “00”.

■HOW TO USE THE STOPWAT C H

• The stopwatch can measure up to 30 hours

in 1 1,000 seconds./

* Even if the stopwatch display is changed

to another while the measurement is in

progress, it continues counting properly.

After the stopwatch is used, however, be

sure to reset it as the battery energy is

consumed enormously to shorten the battery

life.

St opwa tc h O per ati on

S t a r t S t o p

R e s t a r t

S t o p

Accumulated elapsed time measurement

C C C

Press button “A” to show the stopwatch display.

R e s e t

Accumulate repeatedly by

pressing button “C”.

2. If the watch is left untouched in the time/

calendar setting display with the digits

flashing, it will automatically return to the

time/calendar display in 2 minutes.

Seconds

MinutesHour

■ BUTTONS A ND DISPL AYS

Month

The selection of the display can be made in

the following order with each press of button

“A”.

Stopwatch

d i s p l a y

T i m e / c a l e n d a r

d i s p l a y

T i m e r

d i s p l a y

A l a r m

d i s p l a y

D u a l t i m e

d i s p l a y

Seconds

MinutesHour

Month

“P” (PM)

mark

Date

Day

Stopwatch

display

indicator

1/1,000 seconds

Hour Minutes Seconds

Hourly time

signal mark

“P” (PM)

mark Alarm mark

Day

4. Press button “D” to set the flashing digits.

One digit is advanced with each press of

button “D”. Digits except seconds and 12-

/24-hour indication move quickly by keeping

button “D” pressed.

5. After all the adjustments are completed,

press button “B” to return to the time/

calendar display.

12-/24-hour

indication Date Month

Minutes

Date

→

Display

indicators

Alarm

channel

Display

indicators

I MNSTRUCTION ANUAL

CAL. W110 (RBQ SERIES)

CAL. W111 (RB8 SERIES)

NREW110C 11-99

Measurement between two competitors

Split time measurement

S t a r t

CD C D

S p l it

S p l i t r e l e a s e

S t o p R e s e t

Finish (First runner)

CD C D D

Finish (Second runner)

S t a r t

F i n i s h t i m e

of 2 n d

c o m p e t i t o r

R e s e tS t o p

Measurement and release of split time

can be repeated by pressing button “D”.

F i n i s h

t i me of 1 s t

c o m p e t i t o r

■ HOW TO SET THE 3-CHANNEL

ALARM

1. In the alarm display, selection of the alarm

channel or hourly time signal to be engaged

or disengaged is made in the following order

by pressing button “C”.

E ngag e men t/d i sen g a geme n t o f the

ala rm a nd h our ly t im e sig n al

• The alarm can be set to ring at three different

times a day. Set the three alarm channels

one by one to desired alarm times.

1. Press button “A” to show the alarm display.

2. Selection of the alarm channel to be set is

made in the following order by pressing

button “C”.

* The alarm cannot be set in the hourly

time signal display.

Channel 1 Channel 2

MinutesHour

3. By pressing button “D” to set the digits in

the alarm setting display, the alarm mark

is displayed and the alarm is automatically

engaged.

4. If the watch is left untouched in the alarm

setting display with the digits flashing, it

will automatically return to the alarm display

in 2 minutes.

N o t e s :

1. When the time function is displayed in the

24-hour indication, the alarm is also displayed

in the 24-hour indication.

2. When setting the hour digits in the 12-

hour indication, check that “A” (AM)/“P ”

(PM) mark is correctly set. In the 24-hour

indication, “24” (24-hour indication) mark

is displayed.

2. [Alarm and hourly time signal engagement/

d i se n g a g e m e n t ]

With each press of button “D”, the alarm of

the selected channel or hourly time signal

is engaged and disengaged alternately.

* The alarm and hourly time signal can be

engaged and disengaged independently

of each other.

Indication of

the alarm

channel

Alarm/hourly

time signal

engaged

Alarm/hourly

time signal

disengaged

(Hourly time

signal)

• The alarm rings at the designated time for

20 seconds and stops. To stop it manually,

press button “A”, “B”, “C” or “D”.

• The alarm can be tested by keeping button

“D” pressed in the alarm display.

Hour

Hourly time

signal mark

Alarm mark

Alarm display

indicator

Alarm channel

■ HOW T O SET THE D UAL TIME

Time of a different time zone can be set and

displayed together with the time you have set

in “HOW TO SET THE TIME/CALENDAR”.

1. Press button “A” to show the dual time

display.

2. Press button “B” to show the dual time

setting display.

3. To set the digits, refer to “HOW TO SET

THE TIME/CALENDAR”.

Minutes “A” (AM)/“P”

(PM) mark

A D

Hour Minutes

“A” (AM)/“P”

(PM) mark

Dual time

display

indicator

Channel 3

Hourly time

signal display

3. Press button “B” to show the alarm setting

displa y. The hour digits (an d “A”/“P”

mark if the time is set in the 12-hour indication)

start flashing.

4. Press button “C” to select the digits to be

adjusted (flashing).

5. Press button “D” to set the digits. One

digit is advanced with each press of the

button. The digits move quickly by keeping

the button pressed.

6. After all the adjustments are completed,

press button “B” to return to the alarm

display.

* To set more than one alarm cha nnel,

follow the procedure above starting from

the step “2”.

Channel 3

Hourly time

signal display

Channel 1 Channel 2

→

■ HOW TO USE THE COUNTDOWN

TIMER

•The timer can be set up to 99 hours and 59

minutes in minutes.

■LUMIBRIT E W A T C H

(dial, hands, buttons, case, bezel,

s t rap, e tc.)

✩If your watch is a LORUS LUMIBRITE watch,

it has following features.

LORUS LUMIBRITE watches absorb and store

light energy from natural and artificial light

sources and emit light in the dark. They are

made of environmentally friendly material,

and therefore, are harmless to human beings

and the environment.

• With a full charge, LORUS LUMIBRITE

watches glow in the dark hours longer than

conventional luminous watches of this type.

If exposed to a light of more than 500 lux

(i.e., the brightness of a typical office) for

approximately 10 minutes, or direct sunlight

for 2 minutes, they will glow for hours.

• S ince LORUS LUMIBRITE watches emit

the lig ht they store, the brightness will

decrease gradually over time. The length

of time they will glow may also differ slightly

depending on such factors as the brightness

of and distance from the light source used

to charge the watch.

■ILL UM I N A T I N G LI GHT

When button “D” is pressed in th e time /

calendar or dual time display, the light illuminates

the display for easy viewing in the dark.

•The remaining time is displayed in 1/10

seconds.

Tim e r s e ttin g

Tim e r o p e ra tio n

Press the button in the following order.

T i m e - u p

S t o p

R e s t a r t

Warning

sound

beeps

S t a r t

Restart and stop of the

timer can be repeated by

pressing button “C”.

* When the set time is up, a warning sound

beeps for 10 seconds. To stop it manually,

press button “A”, “B”, “C” or “D”.

CCC

2. Press button “B” to show the timer setting

display. The hour digits start flashing.

3. Selection of the digits to be adjusted (flashing)

is made in the following order by pressing

button “C”.

4. Press button “D” to set the digits. One

digit is advanced with each press of the

button. The digits move quickly by keeping

the button pressed.

5. After all the adjustments are completed,

press button “B” to return to the timer

display.

N o t e : If the watch is left untouched in the

timer setting display with the digits

flashing, it will automatically return

to the timer display in 2 minutes.

1. Press button “A” to show the timer display.

Timer

display

indicator

■ ViViDiGi

ViViDiGi is a new type of liquid crystal panel

that makes possible various colors and high

contrast.

• Excellent light reflection and transmission

make the display bright and clear.

• Various color options are available.

• Either the whole panel or the displayed

data only can be illuminated.

* Features vary in different models.

■ BATTERY CHANGE

The miniature lithium battery PANASONIC

CR2025,which powers your watch should last

approximately 5 years. However, because it

is inserted at the factory, the actual life of

the battery once in your possession may be

less than the specified period. Be sure to

replace the battery to prevent any possible

malfunc tion as soon as it runs down . To

replace the battery, w e recommend taking

the watch to a local watch repair shop.

N o t e : If the alarm is used for more than 3

seconds a day, the illuminating light

for more than 4 seconds a day and/or

the timer warning sound for more than

10 seconds a we ek , the battery life

may be less than the specified period.

Minutes SecondsHour

Set time

Time

measured

1/10

seconds

MinutesHour →

→

Termékspecifikációk

Márka:	Lorus
Kategória:	óra
Modell:	W110

Szüksége van segítségre?

Ha segítségre van szüksége Lorus W110, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók óra Lorus

Lorus W207 Útmutató

12 Január 2025

Lorus R23 SERIES - CAL Z013 Útmutató

21 Augusztus 2024

Lorus VX7P Útmutató

20 Augusztus 2024

Lorus Dress RM313GX9 Útmutató

19 Augusztus 2024

Lorus VX9P Útmutató

18 Augusztus 2024

Lorus Classic RS952CX9 Útmutató

18 Augusztus 2024

Lorus Z021 Útmutató

17 Augusztus 2024

Lorus Z004 Útmutató

17 Augusztus 2024

Lorus Women RG208RX9 Útmutató

17 Augusztus 2024

Lorus Dress RT333GX9 Útmutató

16 Augusztus 2024

Útmutatók óra

Legújabb útmutatók óra

Casio EFR-571DB Útmutató

30 Március 2025

Citizen Zenshin Three-hand AW0130-85A Útmutató

26 Március 2025

Citizen Weekender BM8595-16H Útmutató

26 Március 2025

Casio Collection LTP-2069L-7A2VEF Útmutató

23 Március 2025

Casio Edifice EFS-S560DB-1AVUEF Útmutató

23 Március 2025

Casio Edifice EFR-564D-1AVUEF Útmutató

23 Március 2025

Casio EQB-700D-1AER Útmutató

23 Március 2025

Casio GA-100L-8ADR Útmutató

23 Március 2025

Casio STR300C-1V Útmutató

23 Március 2025

Casio G-Shock GA-110C-7AER Útmutató

23 Március 2025