Használati útmutató LG UT12FH

LG légkondicionáló UT12FH

Olvassa el alább 📖 a magyar nyelvű használati útmutatót LG UT12FH (7 oldal) a légkondicionáló kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/7
www.lg.com
Please read this manual carefully before operating your set and retain it for future
reference. Installation work must be performed in accordance with the national wiring
standards by authorized personnel only.
This equipment shall be provided with a supply conductor complying with the national
regulation.
Original instruction (R410A/R32)
[
Representative
]
LG Electronics Inc. EU Representative : LG Electronics European Shared
Service Center B.V. Krijgsman 1, 1186 DM Amstelveen, The Netherlands
[Manufacturer]
LG Electronics Inc. Changwon 2nd factory 84, Wanam-ro,
Seongsan-gu, Changwon-si, Gyeongsangnam-do, KOREA
Copyright © 2019 - 2020 LG Electronics Inc. All Rights Reserved.
OWNER’S MANUAL
AIR
CONDITIONER
MFL71666501
Rev.00_010920
ENGLISH ITALIANO ESPAÑOL FRANÇAIS DEUTSCH
ΕΛΛΗΝΙΚΆ
ČEŠTINA
NEDERLANDS
POLSKI
LIMBA ROMÂNĂ
4Indoor Unit
Safety Instructions
- Do not disassemble or repair the product. There is risk of fire or
electric shock.
• Always ground the product.
- There is risk of fire or electric shock.
• Install the panel and the cover of control box securely.
- There is risk of fire or electric shock.
• Always install a dedicated circuit and breaker.
- Improper wiring or installation may cause fire or electric shock
• Use the correctly rated breaker or fuse.
- There is risk of fire or electric shock.
• Do not modify or extend the power cable.
- There is risk of fire or electric shock.
• Do not install, remove, or re-install the unit by yourself (customer).
- There is risk of fire, electric shock, explosion, or injury.
• Be cautious when unpacking and installing the product.
- Sharp edges could cause injury. Be especially careful of the case
edges and the fins on the condenser and evaporator.
• For installation, always contact the dealer or an Authorized Service
Center.
- There is risk of fire, electric shock, explosion, or injury.
• Do not install the product on a defective installation stand.
- It may cause injury, accident, or damage to the product.
• Do not turn on the breaker or power under condition that front panel,
cabinet, top cover, control box cover are removed or opened.
- Otherwise, it may cause fire, electric shock, explosion or death.
• Be sure the installation area does not deteriorate with age.
- If the base collapses, the air conditioner could fall with it, causing
property damage, product failure, and personal injury.
• Use a vacuum pump or Inert (nitrogen) gas when doing leakage test or
air purge. Do not compress air or Oxygen and Do not use Flammable
gases. Otherwise, it may cause fire or explosion.
- There is the risk of death, injury, fire or explosion.
• The appliance shall be stored in a well-ventilated area where the room
size corresponds to the room area as specified for operation. (for R32)
Owner’s Manual 13
ENGLISH
Operating Instructions
ڸ ڸ
ڹ
Temp(°C/°F)
25°C(78°F)
22°C(72°F)
19°C(66°F)
Code Feel
2 Cold
1 Slightly cool
0 Neutral
-1 Slightly warm
-2 Warm
1Press the button repeatedly until
icon blinks.
2Press the or button to set the
desired temperature.
3Press the button to set the desired
change temperature.
※Default value is 2°C(4°F). Change temperature
range: 1°C ~ 7°C (2°F ~ 14°F)
Cooling only model
The temperature and fan speed are automatically set
by the electronic controls based on the actual room
temperature.
If you feel hot or cold, press or buttons for
more cooling or heating effect.
You cannot switch the indoor fan speed. It has already
been set by the auto mode rule.
Please select the code depend on your feeling.
Example of using change temperature
Condition
1) Mode: Auto mode
2) Temperature: 22°C(72°F)
3) Change Temperature: 3°C(6°F) Change→
Temperature 3°C(6°F) difference
※In case of the above conditions, it operates as in the
graph.
Cooling & Heating model
You can set desired temperature and indoor fan speed.
Setting the mode change temperature
①: Cooling operation start
②: Heating operation start
1Press the button repeatedly to select the
auto operation mode.
icon is displayed.
Auto operation mode
This function automatically manages room temperature
based on set temperature.

Termékspecifikációk

Márka: LG
Kategória: légkondicionáló
Modell: UT12FH

Szüksége van segítségre?

Ha segítségre van szüksége LG UT12FH, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók légkondicionáló LG

LG

LG A09AWG Útmutató

10 Április 2025
LG

LG A12AWH Útmutató

5 Április 2025
LG

LG ARNU07GSBL2 Útmutató

31 Március 2025
LG

LG LSNJ0961RL Útmutató

28 Március 2025
LG

LG HSNH1865GA0 Útmutató

27 Március 2025
LG

LG LS-J0963CL Útmutató

27 Március 2025
LG

LG LS-L1261HL Útmutató

27 Március 2025
LG

LG LWC1262ACG Útmutató

27 Március 2025
LG

LG C242CC Útmutató

5 Január 2025
LG

LG C182CC Útmutató

5 Január 2025

Útmutatók légkondicionáló

Legújabb útmutatók légkondicionáló

Carson

Carson PA240 Útmutató

10 Április 2025
Carson

Carson PA340 Útmutató

10 Április 2025
Midea

Midea MUB-60HRN1 Útmutató

9 Április 2025
Fakir

Fakir 1020 Útmutató

9 Április 2025
Daikin

Daikin FWP17CATN6V3 Útmutató

9 Április 2025
Daikin

Daikin FWP06CAFN6V3 Útmutató

9 Április 2025
Panasonic

Panasonic CS-45KA1E5 Útmutató

9 Április 2025
Daikin

Daikin FXNQ63A2VEB Útmutató

9 Április 2025
Daikin

Daikin FXNQ20A2VEB Útmutató

9 Április 2025
Frigidaire

Frigidaire GHWW125TE1 Útmutató

9 Április 2025