Használati útmutató Leviton 68A02-2

Leviton Térfigyelő kamera 68A02-2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Leviton 68A02-2 (2 oldal) a Térfigyelő kamera kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/2
Do not attempt to disas mble se
the camera. If the camera does
not function, plea contact se
Leviton.
Installation
1. Locate and choose the position where the
camera will be mounted.
2. Disassemble the mounting plate (the plate
with three holes) from the base.
3. Mark the thre holes according to the e
mounting plate placement.
4. Drill three holes, then insert anchors into the
drilled holes.
5. Attach the camera base to the ceiling or wall using the supp ed li
screws.
6. Connect power / video wires.
7. Assemble the camera back to the mounting
plate and lock it in place by using the locking
screw located between the mounting plate
and the camera.
8. Loosen the locking screws. Adjust angle to
desired positions.
9. Combine each bracket part and tigh n each te
section using the supplied installation tool.
Dimensi s on
68A02-2
Day/Night IR Bullet Camera
Day/Night IR Bullet Camera
(2.8 - m Manual Zoom Lens) 10 m
IMPORTANT INFORMATION
Must use a regulated 12VDC power supply.
Must use correct DC type plug for power lead.
If camera cables are spliced, the warranty will be void.
Do not face the camera directly into sun ght or a li
strong light, as it will damage the CCD d cause the an
camera to malfunction.
Installati Ma l on nua
!
Specification
Pac isking L t
No Name Model Number
1. Day/Night IR Bu et Camera ll
68A02-2 1
2. Installation Manual 68I02-2
1
3. Installation Tool 1
M elod 68A02-2
Pick up Element 1/ SONY CCD 3"
E tive Picture ffec
Elements (H×V) NTSC: 7 (H) × (V) 68 494
Horizontal
Resolution 560 ne TV Li s
Minimum
Illumination 0 Lux (with IR illumi tion) na
S/N Ratio More t 48dB han
S ing Systemcann 2:1 interlace
Synchronous
System Internal, tive sync. nega
Auto Electronic
S erhutt NTSC: 1/60s - 1/100, s 000
Gama
Char teristicac 0.45
IR Distance 100 ee ed f t with infrar LED illumi tion na
IR Status Under 10 x by CDS Lu
IR Power On CDS AUTO Control
Video Output 1V , pp 75 Ω
Auto Gain Control Auto
Power Cu ent/rr 12 400VDC, mA
Lens 2.8 - M l Z m L s 10mm anua oo en
Dimension 9” (W) x 3.8” (H) x 3.2” (D)
Weight 2.6 lb
Storage
Temperature -22ºF - 0ºF, RH 95%, Max 14
Operating
Temperature 23ºF - 4ºF, RH 95%, Max 10
DI-021-SU682-05A
(68I02-2)
REGULATORY NOTICE
● The power output voltage, current, voltage polarity, and operating
temperature must match the camera’s r uirement. eq
● In order to capture high quality pictures, the power supply’s cable and
video output cable should not be too long.
This device complies with Part 15 of the FCC Rules. O rati is subject to the followingpe on
two co iti s: (1) This device may not c se harmful interfer ce, (2) this device nd on au en and
must acc t y interfer ce receiv , incl ing interfer ce t t may cause u sired ep an en ed ud en ha nde
operation.
This equipm t s b n tested foen ha ee and und to comply with t limits for a Class A digital he
device, purs nt to Part 15 of the FCC Rules. T se limits are desi to provide ua he gned
r s ble protecti against harmful interfer ce in a resi tial installati . This ea ona on en den on
equ en geneipm t rates, uses, and can radiate rad io freq cy energy, if not install uen and ed
and on use in accordance with the instructi s, may cause harmful interfer ce to radio en
co icati s. Operati of this equipm t in a resi ntial area is kely to cause mmun on on en de li
interfer ce, in which case the user will be re ir to correct the interfer ce at their en qu ed en
own ex se. pen
WARNING: Cha s or m ifications not expressly a rov by the mnge od pp ed anufacturer coul
d
void t user’s thority to rate the equipm t . he au ope en
CAUTIONS: W n this camera is install near equipmhe ed en unt, like a wireless comm ica-
ti vice that emits a stro electromon de ng agnetic field, some i egularity such as noise rr on
the m itor scr may h . on een appen
DISCLAIMER
While every effort s b m to ensure t t the informati contai in this guide ha een ade ha on ned
is accurate complete, liability will acc ted for any e ors or omissi s. and no be ep rr on
M facturer reserves t ri t to ch ge the specificati s of the hardware a anu he gh an on nd
software descri rein at y time with t prior notice. bed he an ou
No rt of this guide may be r r c , transmitt , tr scribed, stor in a retrieval pa ep odu ed ed an ed
system, or tr slated into y l g in y form, by any m s, with t an an an uage an ean ou prior writt en
pe on anurmissi of m facturer.
M facturer makes no wa ties for dam s resulti from co ted or lost data duanu rran age ng rrup
e
to mistak o rati or malfuncti of the cameras, ri eral devices, or en pe on on pe ph unap edprov /
un uppos rted devices.
Notes：
!
CO ECT NNN IO
DC12V P Supply ower
M itor on
68A02-2
TRO LE SH TING UB OO
Link wire rule ：
Power
Video
1. No Picture after providing wer po
● Che the power supply. ck
● Check all of the connected cables.
2. e cture backgr color cha es c ti slyTh pi ound ng on nuou
●
3. e cture a ears smeared Th pi pp
● The power uppl s y voltage unstable.
●
Video
12VDC
ZOOM FOCUS
GND Video
Fluorescent lighting can cause electromagnetic
interference. This is a normal phenomenon. Reduce the
number of fluorescent fixtures or increase the distance
between the fixure and camera.
Connected cables are not connected correctly or have high
impedance.
INTRODUCTION
Notes:
● Never install the camera facing the sun or other bright objects.
Otherwise, it will damage the CCD.
● Do not mount the camera near radiators or heaters.
To prevent fire or shock hazarded. Do not expose
the uni t to rain or moisture.
This symbol is intended o aler the user to the t t
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the camera.
The symbol is intended to alert the user to the
presence of ‘dangerous voltage’ within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
CAUTION:
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER FROM ENCLOSURE.
NO U R SERVICEABLE PARTS INSIDE. SE
REFER RVICING TO QUALIFIED RVICE SE SE
PERSONNEL
RISK OF ELECTRIC SHO . DO NOT OPEN CK
CAUTION: TO PRE NT ELECTRIC SHOCKS AND RISK OF VE
FIRE HAZARDS, DO NOT U OTHER THAN SE
CIFIED POWER SO E. SPE URC
Before installi and using this camera, please re the cong ad mplete
man l. Be sure to k p it ha y for later use. ua ee nd
Key F tures ea
1/3’ Sony CCD s sor en
560 TV Lines
2.8 - Varifocal Lens 10mm
36 IR LED
AGC (Automatic Gain C trol) on
12VDC Si le Voltage ng
!
!
For Technical Assistance Call: 800-824-3005 - www.leviton.com
© 2013 Leviton Mfg. Co., Inc.
DI-021-SU682-05A

Termékspecifikációk

Márka: Leviton
Kategória: Térfigyelő kamera
Modell: 68A02-2

Szüksége van segítségre?

Ha segítségre van szüksége Leviton 68A02-2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Térfigyelő kamera Leviton

Leviton

Leviton 68A02-2 Útmutató

29 December 2024

Útmutatók Térfigyelő kamera

Legújabb útmutatók Térfigyelő kamera

Hikvision

Hikvision THC-T127-PTLTS Útmutató

7 Január 2025
Nextech

Nextech QC8067 Útmutató

7 Január 2025
D-Link

D-Link DCS-6210BS Útmutató

6 Január 2025
D-Link

D-Link DCS-6501LH/E Útmutató

6 Január 2025
D-Link

D-Link DCS-60 Útmutató

6 Január 2025
D-Link

D-Link DCS-2103 Útmutató

6 Január 2025
I-PRO

I-PRO WV-S15600-V2L Útmutató

3 Január 2025
TP-Link

TP-Link Tapo A100 Útmutató

3 Január 2025
TP-Link

TP-Link Tapo C501 Útmutató

3 Január 2025
TP-Link

TP-Link Tapo D235 Útmutató

3 Január 2025