Használati útmutató Lenco CS-420
Lenco
Autórádiók
CS-420
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Lenco CS-420 (71 oldal) a Autórádiók kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/71
CS-420
INSTRUCTION MANUAL
AM/FM-RDS DIGITAL PLL TUNING RADIO
SD/USB/MP3/WMA PLAYER
www.lenco.com
1
LOCATION AND FUNCTION OF CONTROLS
1. RELEASE BUTTON
Press the REL button to release the front control panel from the unit chassis, then pull it up a little to
remove from the unit chassis.
When the front control panel is removed the LED indicator flashes.
2&3&4. SEL BUTTON (Select) AND VOL+/VOL- BUTTONS
a) Press the SEL button briefly, it is activated as selecting each mode of E. VOL.
-> VOL ->BASS ->TRE -> BAL -> FAD->
When selecting a desired E.VOL mode, press the VOL+ or VOL- button to adjust.
In each mode, the waiting time is about 5 seconds, and the waiting time is over, it returns to the last
display mode .
The mode of E.VOL is operated with following numeric display.
- VOL: MIN(00), 01,......46, MAX(47).
- BASS/TRE: -07, -06,...,00,...+06,+07
- BAL: 0LR9, 1LR9, ..., 9LR9,..., 9LR1, 9LR0
- FAD: 0FR9,1FR9, ..., 9FR9,..., 9FR1, 9FR0
b) Press SEL button and hold for more than 2 seconds to turn on TA SEEK/TA ALARM mode, then press
SEL button shortly and repeatedly to select PI SOUND/PI MUTE, RETUNE L/RETUNE S, MASK
DPI/MASK ALL, BEEP ON/BEEP OFF, USER SET
(FLAT/CLASSIC/ROCK/POP),VOL LAST/VOL DEFA ,
STEREO/MONO(in RADIO mode), LOUD OFF/LOUD ON,DX/LOCAL (in RADIO mode), CLK
ON/CLK OFF, CLK 12/24 mode.
After selecting a desired mode, press the VOL- or VOL+ button to select one setup item of the desired
mode.
1) TA SEEK/TA ALARM:
TA SEEK mode: when newly tuned station does not receive TP information for 5 seconds, the radio
retunes to next station which has not the same station (PI) as the last station, but has the TP
information.
When TP information gets lost at the current station for retune time which is set by RETUNE
SHORT(90 seconds) or RETUNE LONG(150 seconds), the radio start to retune to next same PI
station. When same PI station does not catch in 1 cyclic search, the radio retunes to next station with
TP information.
2
TA ALARM mode: when this mode is selected, any automatic retune mode is not activated.
Only double beep sound(ALARM) is out-put.
When newly tuned station does not have TP information for 5 seconds, beeps come out.
When TP information gets lost at the current station for retune time, the beep sound is out-putted.
When newly tuned station has not RDS signal, PI SEEK is suppressed somewhat
2) PI SOUND/ PI MUTE:
PI SOUND mode: if a car cruises that critical area back and forth, an oscillation phenomenon can be
occurred, because the different PI code can be receive from a same AF. when the different PI sound
(DIP) is heard once in a while, the different PI sound will be heard for less than 1 second.
PI MUTE mode: under above same situation, a mute sound will be heard for less than1second.
3) RETUNE L / RETUNE S:
The initial time of automatic TA search or PI SEARCH mode is selected.
When PI information is not caught for retune time , the radio start to retune to next same PI station.
When same PI station does not catch 1 cyclic search, the radio goes to last station and waits for 4-5
minutes until PI code is received.
RETUNE L mode: selected as 150 seconds.
RETUNE S mode: selected as 90 seconds.
4) MASK DPI/MASK ALL:
MASK DPI mode: masked only the AF which has different PI.
MASK ALL mode: masked the AF which has different PI and NO RDS signal with high field strength.
5)BEEP ON/BEEP OFF
BEEP ON mode: The beep sound is generated when any key is pressed.
BEEP OFF mode: The beep sound is disabled.
6) VOL LAST/VOL DEFA
VOL LAST: When power on the unit, the volume level is equal to the one when the unit was last
switched off.
VOL DEFA: After selecting VOL DEFA, press SEL button to display AVOL, then press VOL+ or VOL-
button to adjust AVOL level.
After ACC-power off and ACC-power on the unit, the volume level is equal to the AVOL
level.
7)CLK ON/OFF
CLK ON: Clock will always show on the display when power off.
CLK OFF: Clock will disappear on the display when power off.
5. POWER ON/OFF & MUTE
When the unit is power off, the unit comes to on by pressing any button except the the RELEASE
button.
When the unit is power on, press and hold the power button for more than 0.5 seconds, the unit goes
into power off mode.
When the unit is power on, press the power to switch the MUTE state on/off.
6. LCD Display
7&8. TUNE, SEEK, TRACK, SKIP UP / DOWN BUTTONS
a) In RADIO mode:
3
Press the >>| or |<< button briefly to manually tune up/down for your desired radio station step by step.
Press and hold the >>| or |<< button for more than 0.5 seconds to automatically tune up/down for an
available radio station of strong signal.
b) In SD & USB mode:
Press the >>| button briefly to play next track. Press the |<< button briefly to play from the beginning of
the current or previous track.
Press and hold the >>| or |<< button to skip forward or backward, release to resume normal playback.
9. BAND BUTTON
In radio mode, press the BND button briefly to select the radio broadcasting band you would like to
hear. The AM/FM band is toggled cyclically through the tuning bands:
->FM 1-> FM 2 -> FM 3 -> MW 1->MW 2 ->.
10. MODE BUTTON
Press it to select TUNER, USB(after inserting a USB stick), CARD(after inserting a SD card) or AUX
mode.
11. CLOCK BUTTON
Press CLK button briefly to display clock time , radio frequecy or PTY type alternatively. Each
information displays for 5 seconds on display, and then returns to display information before pressing
CLK button.
Press and hold CLK button for more than 1 seconds until the clock time flashes on display. Then you
can adjust HOUR or MINUTE by pressing VOL- or VOL+ button .
12. PTY (PROGRAM TYPE) BUTTON
Press it briefly and repeatedly to select one of the following mode:
-->POP M--> NEWS-->PTY OFF-->
While selecting POP M or NEWS, its selection is implemented by preset buttons (press one of 6
preset buttons briefly and repeatedly to select a PTY TYPE in the preset button).
When selecting a desired PTY TYPE and there are no keys entered for 2 seconds, the selected PTY
TYPE will be searched. During 1 loop, if the selected PTY TYPE is not found, PTY NONE is
displayed, then return to previous normal radio station and PTY icon disappear.
13. TA [TRAFFIC ANNOUNCEMENT] BUTTON
When press the button, it is activated as TA mode on or off.
When TA mode is on(TA is displayed on LCD), it will begin to seek TA station and TA SEEK will be
displayed on LCD for a while.
When traffic announcement is transmitted:
1). If the unit is in SD or USB mode, it will switch to radio mode temporarily.
2). If volume level is below 20, volume level is raised to 20, and returns to its previous mode and volume
level when the traffic announcement is over. If volume is adjusted during traffic announcement, only
the traffic announcement volume is valid.
* TA interruption function:
The current traffic announcement is cancelled by pressing this key. But the TA mode will not be off.
* When TA is on, SEEK, (SCAN), AUTO MEMORY function can be received or saved only when traffic
program identification code has been received.
When TA is ON, traffic program identification code is not received during specified time.
4
14.AF [ALTERNATIVE FREQUENCIES] BUTTON
When pressed briefly , AF switching mode is selected and the state of AF switching mode is
displayed by AF segment in display.
Segment off: AF switching mode off.
Segment on: AF switching mode on, and has RDS information.
Segment flashing: AF switching mode on, but RDS information is not received yet
When AF switching mode is selected, the radio checks the signal strength of AF all the time. The
interval of checking time of each AFs depends on the signal strength of current station, from a few
minute for strong station to a few seconds for weak station. Every time that new AF is stronger than
current station, it switches over to that frequency for very short time, and NEW FREQUENCY is
displayed for 1-2 second. Because the mute time of AF switching or checking time is very short, it is
almost inaudible in case of normal program.
During FM mode, when AF is on, SEEK, (SCAN), AUTO-MEMORY function can only receive and save
RDS program.
When pressed long, AF mode is converted to REGION ON/OFF mode.
REG ON:
AF switching or PI SEEK is implemented to the station which have all PI codes are same as current
station.(PI CODE is checked when AF CHECK in progress)
REG OFF:
The regional code in the format of PI code is ignored when AF switching or PI SEEK is
implemented.(PI CODE and COVERAGE AREA is not checked when AF CHECK in progress)
15. AS/PS BUTTON (Auto-storage /Preset scan)
In radio mode:
1) When press and hold for more than 1 second, the radio searches from the current frequency and
checks the signal strength level until 6 strong signal stations are found. And then the 6 stations
frequency are preset to the corresponding preset memory numbered bank. The auto-storage
operation is implemented in the each selected band. When the auto-storage operation is finished, the
radio execute the Preset scan as short pressing.
2) When press briefly, the radio scans for each preset station in the current band and holds at each
preset station for 5 seconds with releasing mute, and then scan again till one loop is finished.
During SD/MMC or USB mode:
Press the AS/PS button, it is activated selecting TRACK SEARCH mode:
In TRACK SEARCH mode, the LCD will display TRK T "0" and flash the biggest digit 0 that the
SD/MMC card or USB stick contain.
Then press the VOL+ or VOL- button to select the number of the flashing digit from 0 ~ 9. Then press
SEL button to confirm the number and flash next smaller digit 0.
With the same means, select the number of the flashing digit with VOL+/-.
After finishing selecting the number of all flashing digit, press SEL button to play the track of the
selected serial number.
Press the AS/PS button twice, it is activated selecting TRACK SEARCH mode:
In FIRST CHARACTER SEARCH mode, the LCD will display A--......, If there are files names its first
character are A , the ......is the first file name its first character is A by the order of A~Z and 0~9;
otherwise, the ......is NONE. (If there are some songs in character A, press the >>I and I<< to select
your favour.)Then press the VOL+ or VOL- button to select file’s first character by the order of A~Z and
0~9.
Press the AS/PS button thrice, it is activated selecting TRACK SEARCH mode:
In DIRECTORY SEARCH mode, the LCD will display the root folder(if there is not the root folder, it will
find a root folder named ROOT). Then press the VOL+ or VOL- button to select your desired folder
and then press >> | or |<< button to select your desired track in the folder.
5
16-21. PRESET STATION MEMORY AND TOP/>||, INT, RPT, RDM BUTTONS
1) In radio mode:
When pressed briefly, these buttons select a preset station directly. If one of the six buttons is pressed
for more than 2 seconds, the station currently being listened to is memorized into the memory bank of
the selected preset button.
2) In SD or USB mode:
(1)Press the TOP/>|| button briefly to pause the playback of the SD card or USB stick. Press again to
resume normal playback.
Press the TOP/>|| button long to play the first track.
(2)Press the INT button to play the first 10 seconds part of each track, and the LCD will display INT ON.
Press again to stop scan, while the currently selected track will be played, and the LCD will display INT
OFF.
(3)Press the RPT button to play the current track repeatedly, and the LCD will display RPT ONE.
Press the RPT button again to play the tracks in the current folder repeatedly and the LCD display will
show RPT ABM.
Press again to cancel this function, and the LCD will display RPT OFF.
(4)Press the RDM button to play all tracks in random , and the LCD will display RDM ON.
Press again to cancel this function, and the LCD will display RDM OFF.
(5)Press 6 or 5 button to move up and down for 10 tracks at a time.
Press and hold the +10/-10 to select the next or previous folder to be play.
When the total tracks are less than 10, the both buttons are inactively.
22. AUX JACK
Press the mode button to select AUX mode. You can connect any matched external audio device to
the AUX jack. Then operate the audio device and use the player as amplifier.
23. USB SOCKET
When needing to play the files in the USB stick, insert the USB stick into the USB socket. The system
will change into the USB mode automatically, and then play the first file in the USB.
24. SD CARD SLOT
When you need to play the files in a SD card, insert the SD card into the SD card slot. The system will
change into SD mode automatically, and then play the first file from the SD card.
Note:
When SD card and USB stick are both inserted into their slot or socket, the system will change into
the playback mode of the latter one.
25. RESET BUTTON
When the LCD displays incorrectly, some buttons do not function or the sound is distorted, press the
REL button to detach the front panel from the main unit, then remove the front panel and press the
RESET button to rehabilitate the distorted program to zero.
Termékspecifikációk
| Márka: | Lenco |
| Kategória: | Autórádiók |
| Modell: | CS-420 |
Szüksége van segítségre?
Ha segítségre van szüksége Lenco CS-420, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Autórádiók Lenco
9 Július 2024
Útmutatók Autórádiók
- Autórádiók Sony
- Autórádiók Pioneer
- Autórádiók Panasonic
- Autórádiók JVC
- Autórádiók AEG
- Autórádiók Volvo
- Autórádiók Hyundai
- Autórádiók Boss
- Autórádiók Clatronic
- Autórádiók Renkforce
- Autórádiók Sencor
- Autórádiók Xblitz
- Autórádiók Alpine
- Autórádiók Roadstar
- Autórádiók Denver
- Autórádiók Trevi
- Autórádiók Clarion
- Autórádiók Blaupunkt
- Autórádiók Krüger&Matz
- Autórádiók Dual
- Autórádiók Varta
- Autórádiók Caliber
- Autórádiók Marquant
- Autórádiók Pure
- Autórádiók Audiovox
- Autórádiók Peiying
- Autórádiók Naxa
- Autórádiók Nikkei
- Autórádiók Autovision
- Autórádiók MT Logic
- Autórádiók Soundstream
- Autórádiók Blow
Legújabb útmutatók Autórádiók
14 Január 2025
14 Január 2025
14 Január 2025
13 Január 2025
13 Január 2025
13 Január 2025
13 Január 2025
16 Október 2024
14 Október 2024
13 Október 2024