Használati útmutató LC-Power LC-CC-124-ARGB-TB

LC-Power Processzorkoeler LC-CC-124-ARGB-TB

Olvassa el alább 📖 a magyar nyelvű használati útmutatót LC-Power LC-CC-124-ARGB-TB (1 oldal) a Processzorkoeler kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/1
Step 1- Installation
1. Remove the transparent sheet from the cooler and the CPU bottom.
Now spread some thermal paste evenly on the CPU.
2. Clip two sides to each corresponding bracket.
3. Connect the cooler fan and the illuminated outer ring to the mainboard.
Step 2- Fan and wire connection
1. Connect the 4pin PWM connector to the mainboard -> “CPU FAN”
2. Connect the 3 pin digital RGB fan cable (B) with the mainboard.
Consult your mainboard manual to locate the position of the RGB connector on
your mainboard. Colours and modes can be controlled via the mainboard's RGB
software (digital RGB/ARGB).
B
CD
A
LGA775 LGA115X
CPU thermal paste
CPU
Intel
AMD AMD AM2/AM2+/AM3/AM3+/AM4 FM1/FM2/
TM
Silent Power Electronics GmbH,
Formerweg 8, 47877 Willich,
Germany, www.lc-power.com,
Email: support@lc-power.com
TM
LC-CC-124-ARGB-TB
thermal paste
3. Some mainboards need the digital RGB adapter cable (D) which must be connected
between the 3 pin RGB fan cable (B) and the mainboard itself.
So connect the adapter (C) to the 3 pin digital RGB fan cable (B). And now (D) to
the mainboard.

Termékspecifikációk

Márka: LC-Power
Kategória: Processzorkoeler
Modell: LC-CC-124-ARGB-TB

Szüksége van segítségre?

Ha segítségre van szüksége LC-Power LC-CC-124-ARGB-TB, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Processzorkoeler LC-Power

Útmutatók Processzorkoeler

Legújabb útmutatók Processzorkoeler