Használati útmutató Laser SPK-WFQ10

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Laser SPK-WFQ10 (15 oldal) a Bölcső/dokkoló állomás kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/15
QUICK USER MANUAL SPK-WFQ10
1
INDEX
Import Safety Instructions and Precautions _____________________ 1
Button Description 2
Connecting to power 2
Standby Mode 2
LED Display 2
Setup – Download the App__________________________________________ 3
Setup – Android Users __________________________________________ 3
Setup – Apple Users ________________________ __________________ 6
Music playback ___________________________________________ 8
Grouping Speakers _____________________________________ 9
Featured Apps _________________________________________ 10
Restoring Factory Settings _________________________________ 11
FAQ _____________________________________________________ 12
Specifications _____________________________________________ 12
IMPORTANT SAFETY INSTRUCTIONS AND PRECAUTIONS
- Read all instructions carefully before use.
- Retain manuals for future reference.
- Use this product only in the manner described.
- Only use a water-dampened soft-cloth to clean the surface of this product.
- The following will damage this product: any liquid such as water or moisture, extreme heat; cold;
humidity, dusty or sandy environments.
- Only place this device on stable surfaces and ensure that any attached cables are secure and will not
cause the device to fall.
- If charging is required, it is recommended to thoroughly charge electronic devices for the first time
overnight. Subsequent charges can be as needed. During charging, or extended use, the product may
become warm.
- There are no user serviceable parts in this product.
- Un-authorized attempts to dismantle or repair this product will void product warranty
- Using this device near other electronic devices may cause interference.
QUICK USER MANUAL SPK-WFQ10
2
-
Decrease
volume
SET ( RESET/ WPS
Mode): Press
briefly to activate
WPS mode; press
and hold for about
5 seconds to
restore the speaker
to factory settings.
DC IN : Socket for
mains power
adapter. Connect
the power
adapter to power
on the system
automatically.
LINE-IN: Audio
input, 3.5mm
socket.
PLEASE USE
THE CABLE
SUPPLIED FOR
BEST SOUND
BUTTON DESCRIPTION
TOP BACK
CONNECTING TO POWER
Connect your Wi-Fi speaker to a mains power outlet using the supplied external power supply. This
speaker has no ON OFF switch so it will turn on automatically. Note: Disconnect the power, to turn the
speaker OFF.
STANDBY MODE
The system will enter Standby mode after 15 minutes without any audio signal input.
To exit out of Standby mode, begin playing music from your Phone App or, press the volume UP or DOWN
buttons.
LED DISPLAY
Status Display Status
STANDBY Fade in and Out Standby mode after 15 minutes without any audio signal inputs. RED
VOL- / + Flashes Volume increase/ decrease
LINE-IN Lights up Orange Connected via LINE IN (Auxiliary input)
WI-FI Flashes Booting process / Establishing Wi-Fi connection (via WPS mode) White
Lights up System ready for Wi-Fi connection (AP Mode) White
SET Flashes Green Reset to Factory default / Firmware updated
Flashes Slowly Mute audio MUTE
Mute
+
Increase
volume

Termékspecifikációk

Márka: Laser
Kategória: Bölcső/dokkoló állomás
Modell: SPK-WFQ10

Szüksége van segítségre?

Ha segítségre van szüksége Laser SPK-WFQ10, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Bölcső/dokkoló állomás Laser

Laser

Laser SPK-F300 Útmutató

19 Augusztus 2024
Laser

Laser SPK-WFQ30 Útmutató

19 Augusztus 2024
Laser

Laser SPK-WFQ10 Útmutató

14 Augusztus 2024

Útmutatók Bölcső/dokkoló állomás

Legújabb útmutatók Bölcső/dokkoló állomás