Használati útmutató Lascar Electronics EL-USB-2-LCD

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Lascar Electronics EL-USB-2-LCD (6 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/6
EL-USB
Quick Start Guide
DOWNLOAD AND INSTALL SOFTWARE USING THE SOFTWARE
Windows™ 7/8/10 (32 & 64bit)
Visit and click ‘Download’.www.lascarelectronics.com/software
.Insert the data logger into an available USB port on your PC.
.Double click on the EasyLog USB icon on your
Windows™ desktop. This will load the conguration
software. Click ‘Set up and start the USB data
logger’ and follow the set-up wizard.
.When setup is complete, the data logger should be removed
from the USB port. Do not leave your data logger in the
USB port for extended periods as this will cause some of
the battery capacity to be lost (with the exception of
EL-USB-1-RCG).
.You can also download the data from a logger that has been
recording or view previously saved data from the software.
Before using the data logger you will need to insert the 3.6V 2/3AA High
Temperature battery provided, following the instructions below.
1 2
3 4
EL-USB-1 PRO
EL-USB-1-RCG
The EL-USB-1-RCG’s battery is preinstalled. To charge the battery, connect
to a USB port until the green LED shows. The rechargeable battery should
only be replaced by an authorized supplier.
REPLACING YOUR DATA LOGGER’S BATTERY
3 4
1 2
Your data logger is provided with a 3.6V 1/2AA battery already installed. You
can change the battery by following the instructions below.

Termékspecifikációk

Márka: Lascar Electronics
Kategória: nincs kategorizálva
Modell: EL-USB-2-LCD

Szüksége van segítségre?

Ha segítségre van szüksége Lascar Electronics EL-USB-2-LCD, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Lascar Electronics

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva