Használati útmutató Lancom OAP-382

Lancom router OAP-382

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Lancom OAP-382 (8 oldal) a router kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/8

LANCOM OAP-382

Dual-radio 802.11n outdoor access point with fiber-optic connector for maximum performance

1Two integrated 300 Mbps wireless modules for simultaneous operations with IEEE 802.11a/b/g/n

1Versatility from fiber-optic connector and Gigabit Ethernet

1Power over Ethernet for easy installation away from power supplies

1Optional external 48V power supply

1Professional management functions, IEEE 802.11i/WPA2, Multi-SSID and VLAN

1Robust IP-66 protective housing

1Integrated heating and cooling ensures reliability even at extreme temperatures (-25°C to +50°C)

The LANCOM OAP-382 outdoor access point is the right choice for anybody taking high-speed 802.11n wireless LAN to outdoor areas. Its two radio modules make this

access point suitable for a wide range of applications: For example, it can operate as a relay station in a link to a backbone while simultaneously providing Internet access

for WLAN clients. With its water-jet resistant IP-66 housing, integrated heating and cooling, and the sturdy fittings for wall and pole-mounting, the device can be operated

wherever the highest standards for stability and robustness apply be it in the mountains or from rooftop to rooftop in the city. The LANCOM OAP-382 can be easily and—

economically mounted up to 50 m from the nearest power supply thanks to Power over Ethernet. In case you have longer distances, you are recommended to use the

LANCOM fiber kit and the LANCOM OAP-380 PSU.

More Flexibility.

The LANCOM OAP-382 can be networked via Ethernet or fiber optics. The externally accessible SFP slot provides a variety of options for implementing the fiber-optic

connection. The device also offers versatility in the choice of power supply: Depending on the local situation, the LANCOM 382-OAP can be powered either by the supplied

Gigabit High Power PoE injector or via an optionally available 48V cable.

More Security.

LANCOM ensures the highest security standards as it supports a comprehensive range of encryption and authentication mechanisms, including 802.11i, 802.1x, and WPA2.

With the aid of Multi-SSID and protocol filters, up to 8 different user groups can each be assigned with different levels of security. VLAN technology, matured quality-of-service

functions and bandwidth limitation enable the reliable transmission of video and multimedia data.

More Management.

A management system is vital outdoors where conditions are difficult, for example when it is hard to see the LEDs on an access point mounted on a tall mast. The free

LCMS LANCOM Management System allows the monitoring of all device functions and provides an overview of the entire network. For example, it is possible to check

whether the access points are transmitting and, if so, on which channels, how much data each one is sending, which clients are logged in and where, what encryption

method is active, and a whole lot more. The LANCOM Management System also helps you to optimize performance over wireless bridges. Additionally, the LANCOM

OAP-382 supports TACACS+. Using the AAA protocol ("authentication, authorization, accounting") it is possible to track all activities relating to the configuration of the

access point.

More Reliability for the Future.

LANCOM products are fundamentally designed for a product life spanning several years. They are equipped with hardware dimensioned for the future. Even reaching back

to older product generations, updates to the LANCOM Operating System LCOS are available several times a year, free of charge and offering major features.— —

WLAN

2400 -2483.5 MHz (ISM) and 5150-5825 MHz (depending on country-specific restrictions)Frequency band 2.4 GHz and 5 GHz

54 Mbps to IEEE 802.11g (fallback to 48, 36 , 24, 18, 12, 9, 6 Mbps, Automatic Rate Selection) compatible to IEEE 802.11b (11, 5.5, 2, 1 Mbps,

Automatic Rate Selection), 802.11 b/g compatibility mode or pure g or pure b

Data rates 802.11b/g

54 Mbps (fallback to 48, 36 , 24, 18, 12, 9, 6 Mbps, Automatic Rate Selection), fully compatible with TPC (adjustable power output) and DFS

(automatic channel selection, radar detection) according to EN 300 328 Version 1.7.1, EN 302 502

Data rates 802.11a/ h

More than 20 km in 5 GHz. See our LANCOM Antenna Distance Calculator under www.lancom.deRange (outdoor / P2P)

802.11b: +19 dBm @ 1 and 2 Mbps, +19 dBm @ 5.5 und 11 Mbps 802.11g: +18 dBm @ 6 to 36 Mbps, +17 dBm @ 48 Mbps, +16 dBm @ 54

Mbps 802.11n: +19 dBm @ 6,5/13 Mbps (MCS0/8, 20 MHz), +10 dBm @ 65/130 Mbps (MCS7/15, 20 MHz), +17 dBm @ 15/30 Mbps (MCS0/8, 40

MHz), +10 dBm @ 150/300 Mbps (MCS7/15, 40 MHz)

Output power at radio module, 2.4 GHz

802.11a/h: +18 dBm @ 6 to 24 Mbps, +17 dBm @ 36 Mbps, +16 dBm @ 48 Mbps, +15 dBm @ 54 Mbps 802.11n: +18 dBm @ 6,5/13 Mbps

(MCS0/8, 20 MHz), +10 dBm @ 65/130 Mbps (MCS7/15, 20 MHz), +17 dBm @ 15/30 Mbps (MCS0/8, 40 MHz), +10 dBm @ 150/300 Mbps (MCS7/15,

40 MHz)

Output power at radio module, 5 GHz

802.11b/g: Up to 20 dBm / 100 mW EIRP (transmission power control according to TPC)Max. radiated power (EIRP), 2.4 GHz band

802.11a/h: Up to 30 dBm / 1000 mW or up to 36 dBm / 4000 mW EIRP (depending on national regulations on channel usage and subject to further

obligations such as TPC and DFS)

Max. radiated power (EIRP), 5 GHz band

Transmission power reduction in software in 1 dB steps to min. 0.5 dBmMinimum transmission power

802.11b: -91 dBm @ 11 Mbps, -96 dBm @ 1 Mbps; 802.11g: -96 dBm @ 6 Mbps, -83 dBm @ 54 Mbps; 802.11n: -96 dBm @ 6,5 Mbps (MCS0, 20

MHz), -79 dBm @ 65 Mbps (MCS7, 20 MHz); -93 dBm @ 13 Mbps (MCS8, 20 MHz), -77 dBm @ 130 Mbps (MCS15, 20 MHz); -90 dBm @ 15 Mbps

(MCS0, 40 MHz), -75 dBm @ 150 Mbps (MCS7, 40 MHz); -90 dBm @ 30 Mbps (MCS8, 40 MHz), -73 dBm @ 300 Mbps (MCS15, 40 MHz)

Receiver sensitivity 2.4 GHz

802.11a/h: -95 dBm @ 6 Mbps, -82 dBm @ 54 Mbps; 802.11n: -95 dBm @ 6,5 Mbps (MCS0, 20 MHz), -77 dBm @ 65 Mbps (MCS7, 20 MHz); -94

dBm @ 13 Mbps (MCS8, 20 MHz), -74 dBm @ 130 Mbps (MCS15, 20 MHz); -91 dBm @ 15 Mbps (MCS0, 40 MHz), -75 dBm @ 150 Mbps (MCS7,

40 MHz); -90 dBm @ 30 Mbps (MCS8, 40 MHz), -71 dBm @ 300 Mbps (MCS15, 40 MHz)

Receiver sensitivity 5 GHz

Up to 13 channels, max. 3 non-overlapping (depending on country-specific restrictions)Radio channels 2.4 GHz

Up to 26 non-overlapping channels (available channels and further obligations such as automatic DFS dynamic channel selection depending on

national regulations)

Radio channels 5 GHz

Seamless handover between radio cells, IAPP support with optional restriction to an ARF context, IEEE 802.11d supportRoaming

Pre-authentication and PMK caching for fast roamingWPA2 fast roaming

With background scanning, moving LANCOM 'client mode' access points pre-authenticate to alternative access points which offer a better signal

before Roaming fails

Fast client roaming

VLAN ID definable per interface, WLAN SSID, point-to-point connection and routing context (4094 IDs) IEEE 802.1qVLAN

Dynamic VLAN assignment for target user groups based on MAC addresses, BSSID or SSID by means of external RADIUS server.Dynamic VLAN assignment

Support of layered 802.1Q VLANs (double tagging)Q-in-Q tagging

Simultaneous use of up to 8 independent WLAN networks per WLAN interfaceMulti-SSID

Support for Internet Group Management Protocol (IGMP) in the WLAN bridge for WLAN SSIDs and LAN interfaces for specific switching of multicast

packets (devices with integrated WLAN only). Automated detection of multicast groups. Configurable action for multicast packets without registration.

Configuration of static multicast group members per VLAN ID. Configuration of query simulation for multicast membership per VLAN ID

IGMP snooping

IEEE 802.11i / WPA2 with passphrase or 802.1X and hardware-accelerated AES, closed network, WEP64, WEP128, WEP152, user authentication,

802.1x /EAP, LEPS, WPA1/TKIP

Security

Integrated RADIUS server for MAC address list managementRADIUS server

Integrated EAP server for authentication of 802.1X clients via EAP-TLS, EAP-TTLS, PEAP, MSCHAP or MSCHAPv2EAP server

Prioritization according to Wireless Multimedia Extensions (WME, subset of IEEE 802.11e)Quality of Service

Extension of power saving according to IEEE 802.11e by Unscheduled Automatic Power Save Delivery (equivalent to WMM Power Save). U-APSD

supports the automatic switch of clients to a doze mode. Increasmed battery lifetime for telephone calls over VoWLAN (Voice over WLAN)

U-APSD/WMM Power Save

Maximum transmit and receive rates and an individual VLAN ID can be assigned to each WLAN client (MAC address)Bandwidth limitation

If the link of a chosen LAN interface breaks down, a WLAN module can be deactivated to let the associated clients search for a new base stationBroken link detection

Detection of rogue AP's and the channel information for all WLAN channels during normal AP operation. The Background Scan Time Interval defines

the time slots in which an AP or Router searches for a foreign WLAN network in its vicinity. The time interval can be specified in either milliseconds,

seconds, minutes, hours or days

Background scanning

Rogue WLAN client detection based on probe requestsClient detection

Authentication of an access point in WLAN client mode at another access point via 802.1X (EAP-TLS, EAP-TTLS and PEAP)802.1X supplicant

LANCOM OAP-382

Features as of: LCOS 8.80