Használati útmutató La Crosse Technology 914-604

Olvassa el alább 📖 a magyar nyelvű használati útmutatót La Crosse Technology 914-604 (2 oldal) a környezeti hőmérő kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
Model 914 604-
Infra-red thermometer
Congratulations on your purchase of the Infrared
Thermometer! One-click for a temperature reading.
No surface contact required, prevents contamination.
Take a Measurement:
Place the thermometer close to the item to measure.
Click the button once to measure the surface temperature. The
reading will display for 15 seconds.
Hold the button for ongoing readings.
Auto Shut Off:
When the button has not been pressed for 15 seconds, the
thermometer will automatically shut off to save power.
Note: When measuring temperatures above 199.9 °F the last
number will be smaller, due to LCD size. Example: 205 °F will
show as 20 . 5
Applications:
Check doors and windows for drafts.
Maintain proper cooking, cooling and holding
temperatures.
Measure food or liquid temperature (no contact, thus no
contamination)
Measure oven, stove & grill temperatures up to 390.2 °F.
Check heating & cooling ducts, in-floor heating and
furnace temperatures.
Measure engine exhaust, tires and hard to reach areas
Description of measuring principle
When making a temperature measurement, the surface
radiation of the object measured is evaluated, using the
principle of radiation thermometry. This is a purely passive
process, i.e. no radiation is transmitted, but instead, use made
of the natural electromagnetic radiation energy (heat radiation).
Everything above a temperature of absolute zero (−459.67 °F)
has heat radiation.
D/S Ratio: The distance to target diameter ratio (Distance:
Spot) is 1:1 therefore the device should be positioned as close
to the target as possible. As you move farther from the target,
you will receive ambient temperature around the target.
Measuring Tips:
Not recommended for use in measuring shiny or polished
metal surfaces (stainless steel, aluminum, etc.) The
reading will not be accurate.
It is not possible to take measurements through
transparent materials (glass, Plexiglas, etc.). It will
measure the temperature of the transparent surface
instead.
It is not possible to measure air temperatures.
Measurement errors can occur due to air contaminated
with dust, steam, smoke, etc.
Battery Replacement:
Battery is low and no more measurements are possible.
Replace the battery immediately with a lithium button CR2032
cell.
1- Power off the thermometer before replacing the battery
A malfunction may occur if the power is on during battery
replacement. If a malfunction occurs, restart the device.
2-Twist the battery cover on the back of thermometer to loosen
the cover and remove the old battery. A coin will work well.
3- The new CR2032 battery is installed positive side up.
Take care that the metal contacts at the top of the battery
compartment are not bent.
4-Replace the battery cover and tighten.
Troubleshooting:
Problem Solution
No Display: Press the button
Ensure battery polarity is correct
Change the battery
Display “oFF”: Automatic switch off (15 seconds)
Display “Hi”: Temperature is above 390.2 °F
Display “Lo”: Temperature below -27.4 °F
Caution!
Do not aim too close at hot or dangerous targets.
Keep the thermometer and battery away from children.
Batteries can explode if thrown into fire, short-circuited,
taken apart or recharged.
Battery can be fatal if swallowed. If a battery has been
swallowed, get medical attention immediately.
tteries contain harmful acids. Change low batteries as Ba
soon as possible to prevent damage caused by a leaking
battery.
Wear chemical resistant protective gloves and safety
glasses when changing the battery.
Care and Maintenance:
Do not place the instrument near extreme temperature,
vibration or shock.
Protect the unit from large abrupt temperature changes.
Do not store near objects of high temperature.
Do not immerse the unit in water. Water can penetrate and
cause malfunction. Protect from moisture.
Steam, dust, some can prevent accurate measurement by
obstructing the units optics.
Metal Contacts
Metal Contacts
Protect the unit from EMI (Electro Magnetic Interference)
from induction heaters and microwave ovens and static
discharge.
Unauthorized repairs, modifications or changes to the unit
are prohibited.
This product is not for medical purpose or for public
information, but is intended for home use. The product is
not recommended for taking body temperature.
Cleaning:
The sensor lens is the most delicate part of the
thermometer. Protect from dirt.
Clean the unit using only a dry cloth. If the unit is very
dirty, slightly dampen the cloth. Make sure that no
moisture enters the interior of the unit.
When cleaning the lens, loose particles must be removed
using compressed air. Any remaining dirt can be removed
with a soft brush or with a cotton swab moistened with
water.
CAUTION Do not use cleaners containing solvents.
Remove the battery if you do not use the product for a
lengthy time.
Specifications:
Measurement Range: -27.4 °F to 390.2 °F
Operating Range: 32 °F to 122 °F
Storage Range: -4 °F to 149 °F
Accuracy (Ambient Temperature 68 °F to 79 °F):
From - 4°F to 32°F: - (4.5 + 0.1/deg) °F 27. +/
Above 32° -(4.5°F or 2.5% whichever is greater) F: +/
Resolution: (-9.9°F to 199.9°F) 0.5 °F , otherwise 1 °F
Response Time (90%): 1sec
Emissivity Range: 0.95 fixed
Auto switch-off: 15 seconds
Warranty Information:
La Crosse Technology, Ltd provides a 1-year limited warranty
on this product against manufacturing defects in materials and
workmanship.
This limited warranty begins on the original date of purchase, is
valid only on products purchased and used in North America
and only to the original purchaser of this product. To receive
warranty service, the purchaser must contact La Crosse
Technology, Ltd for problem determination and service
procedures. Warranty service can only be performed by a La
Crosse Technology, Ltd authorized service center. The
original dated bill of sale must be presented upon request as
proof of purchase to La Crosse Technology, Ltd or La Crosse
Technology, Ltd’s authorized service center.
La Crosse Technology, Ltd will repair or replace this product,
at our option and at no charge as stipulated herein, with new or
reconditioned parts or products if found to be defective during
the limited warranty period specified above. All replaced parts
and products become the property of La Crosse Technology,
Ltd and must be returned to La Crosse Technology, Ltd.
Replacement parts and products assume the remaining
original warranty, or ninety (90) days, whichever is longer. La
Crosse Technology, Ltd will pay all expenses for labor and
materials for all repairs covered by this warranty. If necessary
repairs are not covered by this warranty, or if a product is
examined which is not in need or repair, you will be charged for
the repairs or examination.
The owner must pay any shipping charges incurred in getting
your La Crosse Technology, Ltd product to a La Crosse
Technology, Ltd authorized service center.
Your La Crosse Technology, Ltd warranty covers all defects in
material and workmanship with the following specified
exceptions: (1) damage caused by accident, unreasonable use
or neglect (including the lack of reasonable and necessary
maintenance); (2) damage occurring during shipment (claims
must be presented to the carrier); (3) damage to, or
deterioration of, any accessory or decorative surface; (4)
damage resulting from failure to follow instructions contained in
your owner’s manual; (5) damage resulting from the
performance of repairs or alterations by someone other than
an authorized La Crosse Technology, Ltd authorized service
center; (6) units used for other than home use (7) applications
and uses that this product was not intended or (8) the products
inability to receive a signal due to any source of interference.
This warranty covers only actual defects within the product
itself, and does not cover the cost of installation or removal
from a fixed installation, normal set-up or adjustments, claims
based on misrepresentation by the seller or performance
variations resulting from installation-related circumstances.
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME
LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE,
OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE
OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS
PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES
OR FOR PUBLIC INFORMATION. THIS PRODUCT IS NOT A
TOY. KEEP OUT OF CHILDREN’S REACH.
This warranty gives you specific legal rights. You may also
have other rights specific to your State. Some States do no
allow the exclusion of consequential or incidental damages therefore
the above exclusion of limitation may not apply to you.
For warranty work, technical support, or information contact:
La Crosse Technology
2817 Losey Blvd. S.
La Crosse, WI 54601
Customer support : www.lacrossetechnology.com/support
Contact Support: 1- - -1610 608 782
Product Information:
www.lacrossetechnology.com/914-604
Product Registration:
www.lacrossetechnology.com/support/register.php
All rights reserved. This handbook must not be reproduced in any
form, even in excerpts, or duplicated or processed using electronic,
mechanical or chemical procedures without written permission of the
publisher.
This handbook may contain mistakes and printing errors. The
information in this handbook is regularly checked and corrections
made in the next issue. We accept no liability for technical mistakes or
printing errors, or their consequences.
All trademarks and patents are acknowledged.

Termékspecifikációk

Márka: La Crosse Technology
Kategória: környezeti hőmérő
Modell: 914-604

Szüksége van segítségre?

Ha segítségre van szüksége La Crosse Technology 914-604, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek