Használati útmutató Konig HC-EB10

Konig Elektromos takaró/párna HC-EB10

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Konig HC-EB10 (45 oldal) a Elektromos takaró/párna kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/45
HC-EB10
MANUAL (p. 2)
Electric Blanket
MODE D’EMPLOI (p. 8)
Couverture électrique
MANUALE (p. 14)
Coperta Elettrica
BRUKSANVISNING (s. 26)
Elektrisk filt
MANUAL DE UTILIZARE (p. 32)
Pătură electrică
BRUGERVEJLEDNING (p. 38)
Elektrisk tæppe
HASZNÁLATI ÚTMUTATÓ (o. 20.)
Elektromos melegítő párna
KÄYTTÖOHJE (s. 23)
Sähköhuopa
ANLEITUNG (s. 5)
Heizdecke
GEBRUIKSAANWIJZING (p. 11)
Elektrische deken
MANUAL DE USO (p. 17)
Manta Eléctrica
NÁVOD K POUŽITÍ (s. 29)
Vyhřívaná deka
ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 35)
Ηλεκτρική Κουβέρτα
VEILEDNING (p. 41)
Elektrisk teppe
2
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
Read the instruction manual thoroughly and keep it for future reference. If the blanket is passed on to a third
party, please hand over these instructions as well.
Ensure you understand how this electrical blanket works en how to use it before you start using it.
Maintain the under blanket in accordance with the instruction manual.
Only use as UNDER BLANKET – Do NOT use as a duvet.
Do not tuck the blanket in.
The blanket must be placed on a relatively rm and non-adjustable mattress.
Do not use on a waterbed or a mechanically adjustable bed or sofa bed.
Do not use when folded.
Do not insert pins into the blanket.
Do not use if it is damp or wet.
Do not use if damaged in any way.
Ensure that the blanket is securely xed to the mattress.
Only use the controller/s supplied with the blanket (model: KDA6-FT).
This blanket is not intended for medical use in hospitals.
Check that the controller/s and mains lead cannot become trapped in the bed or bedding.
Keep the controller/s outside of the bed at the pillow end and ensure it does not get covered – keep it in the
open so you can easily control the blanket.
Do not dry clean.
Do not tumble dry.
Do not use together with another heating appliance.
This under blanket is not intended for use by children or inrm persons without supervision or instruction
concerning use of the appliance by a responsible person.
Ensure that the person using the blanket is not insensitive to heat.
FITTING THE BLANKET
This blanket is intended to be used as an “UNDER BLANKET” and therefore should always be placed on a
relatively rm and non-adjustable mattress.
To help keeping the blanket clean and reducing wear, place the blanket under a bed sheet. Do not place it
under another blanket, mattress protector or similar product as these will greatly restrict the heat output.
The blanket must be xed securely to the mattress using the tie loops on the blanket. The cord must be
threaded through the loops and passed under the mattress, nally being tied in a knot (a tight bow should
sufce so that it is easily undone to enable the blanket to be removed). Ensure, when xing the blanket to the
mattress, that it will not move or crease.
The controller/s should be positioned at the top of the bed (pillow end) for optimal ease of use.
3
USING THE BLANKET
(1)
(5)
(6)
(7)
(8)
(9) (10) (11)
(2)
(3)
(4)
1. Controller
2. Switch
3. Label
4. Blanket
5. Display window
6. Temperature key
7. Timer key
8. Cancel key
9. Power wire
10. Plug
11. Output wire
Plug in the mains supply and ensure the mains switch is in the “ON” position.
Switch the controller to the “ON” position and the power indicator should come on. Push the temperature key
until 5 LEDs are lit (maximum heat). It takes at least 30 minutes to get to maximum heat. Once it has reached
maximum heat you can change the heat level by pushing the temperature key. The guide below gives you an
indication of the heat levels and what the number of lit LEDs mean in terms of the level of heat. To prevent
the blanket from getting too hot, the heat level will automatically reduce to a lower heat level after being on
maximum heat for one hour.
FUNCTION MODES
Press times Temperature LEDs Power Heating state
One One Pe25% Weaker After one
hour changes
automatically
Two Two Pe40% Weak
Three Three Pe55% Middle
Four Four Pe70% Strong
Five Five Pe100% Stronger
Six One Pe25% Weak
...... ...... ...... ......
The controller has a timer function (center button), which allows you to control how long you want the blanket
to be left on. You can program it for max. 8 hours in 1-hour steps. The amount of time in “time mode” will be
accumulated by the number of times you push the timer key on the controller. For example, when you push
the timer key 3 times the blanket will remain on for 3 hours. If you want to cancel the timer, push the cancel
key (bottom key) and all settings will be deleted. To resume, you will have to input the settings using the
timer key again.
If the indicator LEDs start ashing, please press the cancel key to reset the blanket. Change the settings
again to the desired ones. If you can not stop the ashing of the LEDs please unplug the blanket from the
wall outlet and check for damages. If you do not nd any damage reconnect the blanket, if the LEDs are still
ashing stop using the blanket and have it checked by a qualied repairer.
TIMER MODES
Press times one two three four seven eight nine ...ve six
Corresponding
time set light
illuminates
1h ¤¤¤¤¤
2h ¤ ¤ ¤ ¤ ...
4h ¤¤¤¤
8h ¤
Switch on time (h) 1 2 3 4 5 6 7 8 1 ...
When you are no longer using the blanket or when it is not in use, unplug it from the mains supply.

Termékspecifikációk

Márka: Konig
Kategória: Elektromos takaró/párna
Modell: HC-EB10

Szüksége van segítségre?

Ha segítségre van szüksége Konig HC-EB10, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Elektromos takaró/párna Konig

Konig

Konig HC-EB10 Útmutató

9 Július 2024

Útmutatók Elektromos takaró/párna

Legújabb útmutatók Elektromos takaró/párna

Breville

Breville BodyZone BZB557 Útmutató

14 Január 2025
Breville

Breville BodyZone BZB517 Útmutató

14 Január 2025
Sunbeam

Sunbeam Sleep Perfect BL5421 Útmutató

13 Január 2025
Physa

Physa PHY-MTW-1 Útmutató

10 Január 2025
Physa

Physa PHY-MTW-3 Útmutató

10 Január 2025
Yamazen

Yamazen YMK-F46P Útmutató

10 Január 2025
Yamazen

Yamazen YKSG-F33 Útmutató

10 Január 2025
Yamazen

Yamazen YMK-F43P Útmutató

10 Január 2025
Yamazen

Yamazen YKSG-F43 Útmutató

10 Január 2025
Yamazen

Yamazen YHK-46MF Útmutató

9 Január 2025