Használati útmutató Kinzo 71775

Kinzo Akkus fúró-csavarozó 71775

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kinzo 71775 (52 oldal) a Akkus fúró-csavarozó kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/52
18V
20+1
torque
230
v
50
Hz
1100mah NI-Cd
1x
0-550 RPM
LED LIGHT
3-5 HOURS
18V ADAPTOR
1x
CHARGER
1x
POWERTOOLS
W
A
R
R
A
N
T
Y
•
W
A
R
R
A
N
T
Y
•
W
A
R
R
A
N
T
Y
•
W
A
R
R
A
N
T
Y
•
a Cordless drill
b Akku-Bohrschrauber
c Accuboormachine
d Perceuse sans fi l
l Akkumulátoros fúró
o Bezdrátová vrtačka
p Akumulátorová vŕtačka
r Wiertarka akumulatorowal
Intertek
High quality reliable tools.
ECOLINE Cordless drill
Akku-Bohrschrauber
71775 Manual.indd 1 31-12-10 15:35
71775 Manual.indd 2 31-12-10 15:35
3
A
Cordless drill
WARNING:
Read and understand all instruction.
General Power Tool SafeTy warninGS
WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids,
gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord
away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of electric shock.
NOTE: The term residual current device (RCD) may be replaced by the term ground fault circuit
Interrupter (GFCI) or earth leakage circuit breaker (ELCB).
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a
power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power
tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can reduce dust-related hazards.
71775 Manual.indd 3 31-12-10 15:35

Termékspecifikációk

Márka: Kinzo
Kategória: Akkus fúró-csavarozó
Modell: 71775

Szüksége van segítségre?

Ha segítségre van szüksége Kinzo 71775, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Akkus fúró-csavarozó Kinzo

Kinzo

Kinzo 71775 Útmutató

17 Szeptember 2024

Útmutatók Akkus fúró-csavarozó

Legújabb útmutatók Akkus fúró-csavarozó

Einhell

Einhell BAS 12 Vario Útmutató

15 Október 2024
Einhell

Einhell BAS 14.4-2-1H Útmutató

15 Október 2024
Stanley

Stanley FMC640 Útmutató

18 Szeptember 2024
Topcraft

Topcraft TCC-1800K Útmutató

18 Szeptember 2024
Einhell

Einhell BT-CD 10.8 Li Útmutató

26 Augusztus 2024
Batavia

Batavia BT-CBCD001 - 7062722 Útmutató

24 Augusztus 2024
PowerPlus

PowerPlus POW30644 Útmutató

24 Augusztus 2024
PowerPlus

PowerPlus POW30646 Útmutató

24 Augusztus 2024
PowerPlus

PowerPlus POW30633 Útmutató

24 Augusztus 2024
Python

Python AC 12.0 KV Útmutató

24 Augusztus 2024