Használati útmutató Kicker L7R122

Kicker mélynyomó L7R122

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kicker L7R122 (20 oldal) a mélynyomó kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/20
L7R10 | L7R12 | L7R15
Manual del Propietario | Español
ALTAVOZ PARA SONIDOS GRAVES
Benutzerhandbuch | Deutsch
TIEFTÖNER
Manuel d’utilisation | Française
HAUT-PARLEUR D’EXTRÊMES GRAVES
L7R
SUBWOOFERS
Owner’s Manual
2
SPECIFICATIONS
WIRING
L7R subwoofers are available with dual 2(ohm) or dual 4voice coils. Both coils must be connected to
a source of amplifi cation. The dual 2 woofer will generate a 1 load if the coils are wired in parallel or a
4 load in series. The dual 4 woofer will provide a 2 load wired in parallel or 8load wired in series.
The terminals with the white dots are for the fi rst voice coil. The terminals with solid-red and solid-black
markings are for the second voice coil. See Figure 1.
L7R SUBWOOFER
OWNER’S MANUAL
Authorized KICKER Dealer:
Purchase Date:
Speaker Model Number:
Speaker Serial Number:
Model L7R10 L7R12 L7R15
Rated Impedance [Ω] 2 or 4 2 or 4 2 or 4
Fs [Hz] 33.6 30.1 22.5
Continuous Power Handling [Watts RMS] 500 600 900
Sensitivity [1W, 1m] 85.9 86.7 88.05
Xmax (Linear Excursion) [mm] 13.9 13.9 16.4
Re [Ω] 6.79 7.52 7.43
Qms 10.046 10.292 9.846
Qes 0.559 0.666 0.598
Qts 0.53 0.625 .564
Vas [ft³, L] 1.09, 30.87 2.37, 67.4 6.875, 194.7
Outer Frame Dimension [in, cm] 10 11/16, 27.2 12 9/16, 32 15 5/8, 39.6
Mounting Cutout [in, cm] 9 5/16, 23.7 11 1/16, 28.1 13 3/4, 34.9
Mounting Depth [in, cm] 6 1/8, 15.7 6 7/8, 17.4 8 3/8, 21.5
Frequency Response [Hz] 25–100 25–100 20–100
L7R10 / L7R12 / L7R15Models:
Note: All specifi cations and performance fi gures are subject to change. Please visit www.kicker.com for the most
current information. To get the best performance from your new KICKER Subwoofer, we recommend using genuine KICKER
Accessories and Wiring. Please allow two weeks of break-in time for the subwoofer to reach optimum performance.
WARNING: KICKER products are capable of producing sound levels that can permanently damage your hearing! Turning
up a system to a level that has audible distortion is more damaging to your ears than listening to an undistorted system at
the same volume level. The threshold of pain is always an indicator that the sound level is too loud and may permanently
damage your hearing. Please use common sense when controlling volume.
Sound Check: Poor bass response? Check the system phasing by reversing the positive and negative
speaker connections on the subwoofer. If the bass improves, then the subwoofer was out of phase in
reference to the rest of the audio system.
3
BOX BUILDING NOTES
Use 3/4” (1.9cm) or thicker MDF (medium density fi berboard) and seal the joints with silicone. Use the
“template” inside your L7R’s shipping carton to mark the mounting hole, then cut directly on the line.
These designs need internal bracing. Add triangular bracing between each of the larger unsupported
panels. See Figure 3.
All the cubic feet (L) measurements in this manual include the displacement of the woofer. For the vented
enclosures the displacement of the port must be calculated and added to the internal volume of the fi nal
design. Use the outer dimensions of the port and multiply “X x Y x Z”, convert to cubic feet, for example
the L7R12 vented Minimum design’s external port dimensions are, using 3/4” (1.9cm) MDF: [ (13.25” +
1.5” total MDF wall thickness) x (2.5” + 1.5” total MDF wall thickness) x 22.5”] x (1 ft
3 / 1728 in3 ) = .77
ft3, and add this number to the internal volume of the enclosure, L7R12’s 1.75 ft
3 + .77 ft3 = 2.52 ft3. See
Figure 4. Due to the necessary length of these ports, you may want to fold the port along the bottom and
back walls. It will be impractical to use round ports for these designs.
Figure 1 Series WiringParallel Wiring
Figure 2
Cutout Dimensions
Dual 2Ω Voice Coils = 4Ω Load
Dual 4Ω Voice Coils = 8Ω Load
Dual 2Ω Voice Coils = 1Ω Load
Dual 4Ω Voice Coils = 2Ω Load
L7R10
L7R12
L7R15
13 3/4”
(34.9 cm)
11 1/16”
(28.1 cm)
9 5/16”
(23.7 cm)
13 3/4”
(34.9 cm)
11 1/16”
(28.1 cm)
9 5/16”
(23.7 cm)
Corner Radius:
L7R10 - 1-9/16” (3.9cm)
L7R12 - 1-13/16” (4.6cm)
L7R15 - 2” (5.1cm)
coil 1+
coil 2+
to amplifi er +
to amplifi er -
coil 2-
coil 1-
coil 1+
coil 2+
to amplifi er +
to amplifi er -
coil 2-
coil 1-

Termékspecifikációk

Márka: Kicker
Kategória: mélynyomó
Modell: L7R122

Szüksége van segítségre?

Ha segítségre van szüksége Kicker L7R122, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók mélynyomó Kicker

Kicker

Kicker 51MWF104 Útmutató

14 Január 2025
Kicker

Kicker 51MWF124 Útmutató

14 Január 2025
Kicker

Kicker 48CWR154 Útmutató

12 Január 2025
Kicker

Kicker 51MWE104 Útmutató

10 Január 2025
Kicker

Kicker 51MWE124 Útmutató

10 Január 2025
Kicker

Kicker 50CVX154 Útmutató

2 Január 2025
Kicker

Kicker 50CVX124 Útmutató

2 Január 2025
Kicker

Kicker 51CWQ102 Útmutató

24 Szeptember 2024
Kicker

Kicker 51CWQ122 Útmutató

24 Szeptember 2024
Kicker

Kicker 43C84 Útmutató

24 Szeptember 2024

Útmutatók mélynyomó

Legújabb útmutatók mélynyomó

Phase Technology

Phase Technology IW200-II Útmutató

4 Április 2025
Wet Sounds

Wet Sounds ZERO 10 S4 XZ-W Útmutató

2 Április 2025
SoundTube

SoundTube CM1001D Útmutató

2 Április 2025
JL Audio

JL Audio FS108-W5 Útmutató

31 Március 2025
Phase Technology

Phase Technology PL-12p Útmutató

30 Március 2025
ETON

ETON Graphit 8-2 Útmutató

19 Március 2025
ETON

ETON Graphit 8-4 Útmutató

19 Március 2025
ETON

ETON Graphit 10-4 Útmutató

19 Március 2025
ETON

ETON MW 10 FLAT Útmutató

19 Március 2025
ETON

ETON PW 8 Útmutató

19 Március 2025