Használati útmutató Kicker CompVR CVR12

Kicker mélynyomó CompVR CVR12

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kicker CompVR CVR12 (4 oldal) a mélynyomó kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/4

CVR

COMP SUBWOOFERVR

CVR , CVR , CVR , CVR15 12 10 8

2007 Stillwater Designs

CVR8

2 or 4

44.3

400 (200)

83.1

.408 (10.37)

7.56

9.36

.912

.831

.495 (14.01)

41.1 (674)

8 1/2 (21.5)

7 1/16 (17.9)

4 5/16 (11)

WiringOptions

CompVR subwoofers are available with dual 2Ω

(ohm) or dual 4Ωvoice coils. Both coils must be

connected to a source of amplification. The dual

2Ωwoofer will generate a 1Ωload if the coils are

wired in parallel or a 4Ωload in series. The dual

4Ωwoofer will provide a 2Ωload wired in parallel

or 8Ωload wired in series. The terminals with the

white dots are for the first voice coil. The terminals

with solid-red and solid-black markings are for the

second voice coil. See Figures 1 and 2.

PERFORMANCE

Congratulations on your

KICKER purchase

Please record your purchase

information and keep your sales

receipt for validation of warranty.

Note: All specifications and performance figures are subject to change.

Measurements based on 4 ohm voice coil models.

Please visit the www.kicker.com for the most current information.

INSTALLATION

COMPVRSUBWOOFER

Owner’sManual

CVR CVR CVR CVR15 /12 /10 /8

Models:

COMPVRSUBWOOFER 3

Authorized Kicker Dealer:

Purchase Date:

Subwoofer Model Number:

Subwoofer Serial Number:

_________________________

SealedEnclosureApplications

The CompVR generates more sound pressure than competing subwoofers on the market and excels

when used in the recommended sealed boxes. These sealed enclosure designs give the smoothest

response with increased energy at the lowest frequencies, 20 to 30Hz. These designs deliver massive

amounts of highly-accurate bass and can be driven with punishing levels of amplifier power.

The CompVR high performance suspension system can operate in a larger sealed enclosure. This

maximum enclosure volume application is ideal for SQ (ultra sound quality) installations. The SQ

enclosure generates a very flat response curve and superbly extends the subbass response.

CompVR subwoofers perform well in any size sealed enclosure between the Compact and SQ volume

recommendations. These systems will exhibit benefits of both designs: Compact produces high-impact

bass, and SQ generates low bass frequency protraction. Overall, the system will sound more like the

recommended enclosure design it is closest to in enclosure volume. These enclosure recommendations

have been calculated with the airspace inside the enclosure and include the displacement of the woofer.

All sealed-enclosure airspace should be filled to 50% loose poly-fil (polyester fiberfill) stuffing. Do not

make the airspace greater than the SQ, maximum enclosure volume, recommendation.

Model:

CVR8

CVR10

CVR12

CVR15

Sealed Maximum VolumeSQ (Enclosure )

1.8 ft3(51L) Power Handling = 140W RMS

3 ft3(85L) Power Handling = 300W RMS

4.6 ft3(130L) Power Handling = 300W RMS

5.2 ft3(147L) Power Handling = 500W RMS

Sealed Minimum VolumeCompact (Enclosure )

.4 ft3(11.3L) Power Handling = 200W RMS

.8 ft3(22.7L) Power Handling = 400W RMS

1 ft 3(28.3L) Power Handling = 400W RMS

1.8 ft 3(51L) Power Handling = 500W RMS

Model:

CVR8

CVR10

CVR12

CVR15

Panel B, in (cm)

11x8.125 (27.9x20.6)

13.5x10.125 (34.3x25.7)

14.5x11 (36.8x27.9)

17.25x13.5 (43.8x34.3)

Panel A, in (cm)

11x11 (27.9x27.9)

13.5x13.5 (34.3x34.3)

14.5x14.5 (36.8x36.8)

17.25x17.25 (43.8x43.8)

Volume, ft3(L)

.4 (11.3)

.8 (22.7)

1 (28.3)

1.8 (51)

Panel C, in (cm)

9.5x8.125 (24.1x20.6)

12x10.125 (30.5x25.7)

13x11 (33x27.9)

15.75x13.5 (40x34.3)

P m o u h uanel Di ensi ns forCompact Enclosures Sealed sing 3/4” (1.9cm) t ick MDF: (See Fig re 3)

Model:

Nominal Impedance [Zn], ohm [per coil]

Resonance Frequency [fs], Hz

Power Handling Watts, Peak (RMS)

Sensitivity [SPLo], dB @ 1W, 1m

Effective Excursion [EXmax™], in (mm)

DC Resistance [Re], ohm [coils in series]

Mechanical Q-Factor [Qms]

Electrical Q-Factor [Qes]

Total Q-Factor [Qts]

Equivalent Volume [Vas], ft

3(L)

Net Displacement, in

3(cc)

Outer Frame Diameter, in (cm)

Hole Cut-Out Diameter, in (cm)

Mounting Depth, in (cm)

CVR15

2 or 4

20.8

1000 (500)

89.1

.492 (12.5)

6.84

10.81

.442

.425

9.23 (261.45)

243.6 (3992)

15 3/8 (39)

13 7/8 (35.2)

8 1/8 (20.6)

CVR12

2 or 4

26.1

800 (400)

86.7

.498 (12.64)

6.99

9.99

.556

.527

3.37 (95.37)

122.1 (2001)

12 1/2 (31.7)

11 1/8 (28.3)

6 5/16 (16.1)

CVR10

2 or 4

33.2

800 (400)

85.5

.501 (12.73)

6.71

8.93

.640

.597

1.42 (40.24)

75.3 (1234)

10 5/8 (27)

9 1/4 (23.5)

5 9/16 (14.1)

Performance

The Kicker CompVR subwoofers were specially designed for “Livin’ Loud” out in the harsh automotive

environment. CompVR subwoofers are versatile and surpass the competition in a sealed or vented box.

They are made of advanced materials and construction techniques to maintain optimal performance for

years to come.

Please allow two weeks of break-in time for the subwoofer to reach optimum performance. To get the best performance

from your new Kicker subwoofers, we recommend using genuine Kicker Accessories and Wiring.

ParallelWiring

Dual 2 Voice Coils = 1Ω Ω Load

Dual 4 Voice Coils = 2Ω Ω Load

F uig re 1

Coil 1 +

Coil 2+

Coil 2 -

Coil 1 -

Amplifier -

Speaker

Connection

Amplifier +

Speaker

Connection

F uig re 3

SeriesWiring

Dual 2 Voice Coils = 4Ω Ω Load

Dual 4 Voice Coils = 8Ω Ω Load

F u ig re 2

Coil 1 +

Coil 2+

Coil 2 -

Coil 1 -

Amplifier -

Speaker

Connection

Amplifier +

Speaker

Connection

CompVR Subwoofer - Covered by one or more of the following patents:

U.S. Pat #'s 6,611,604, 6,731,773 D473,216, D456,386, D449,293,

D355,193, Taiwan Pat. #162,154; Other U.S. and foreign patents pending.

4 5

INSTALLATION

COMPVRSUBWOOFER

INSTALLATION

Pro Tip: You are one ZX

Mono-Amplifier and a few

cables away from a slamm’in

system! The Kicker ZX line of

mono-amplifiers make it easy

to upgrade to rock-solid bass

with your existing or stock

source unit. Please ask your

dealer about the Kicker ZX

Amplifier upgrades.

Vented ApplicationsEnclosure

Ported CompVRs? Absolutely...and with a vengeance! These enclosures incorporate massive slot-

loaded (rectangular) ports with ultra low air velocity for ground pounding street bass that will make your

“skin bounce on your bones!”

These boxes are the enclosure of choice for outrageous street bass and high performance SPL

contests. If space is not a problem and you want to get the most from your CompVR, try one of these

ported designs. You will not be disappointed.

The ported Compact design increases bass efficiency and fits in many space-limited applications.

Although it is the smallest recommended ported enclosure, the output from 30 to 80 Hz will be

considerably higher than that of any sealed box. The SPL / Deep Bass ported design has even more

output in this crucial frequency band.

The SPL / Deep Bass is the largest and most efficient enclosure design. The SPL / Deep Bass delivers

the sonic output needed to win SPL contests and it produces bass notes “all the way down to the

cella”. This design turns heads and jump starts your heart.

Model:

CVR8

CVR10

CVR12

CVR15

Vented Deep Maximum VolumeSPL/Bass (Enclosure )

1.2 ft3(34L) + port displacement

2 x 8” (5.1x20.3cm) port, 19.125” (48.6cm) long

Power Handling = 75W RMS

1.75 ft 3(49.6L) + port displacement

2.5 x 10.5” (6.4x26.7cm) port, 20” (50.8cm) long

Power Handling = 300W RMS

2.25 ft 3(63.7L) + port displacement

3 x 12.5” (7.6x31.8cm) port, 20.5” (52.1cm) long

Power Handling = 300W RMS

5 ft3(142L) + port displacement

3 x 15.5” (7.6x39.4cm) port, 22” (55.9cm) long

Power Handling = 500W RMS

Vented Minimum VolumeCompact (Enclosure )

.8ft3(22.7L) + port displacement

1.5 x 8” (3.8x20.3cm) port, 20.75” (52.7cm) long

Power Handling = 75W RMS

1.25 ft3(35.4L) + port displacement

2 x 10.5” (5.1x26.7cm) port, 20” (50.8cm) long

Power Handling = 300W RMS

1.75 ft3(49.6L) + port displacement

2.5 x 12.5” (6.4x31.8cm) port, 20” (50.8cm) long

Power Handling = 300W RMS

3.0 ft3(85.0L) + port displacement

2.75 x 15.5” (7x39.4cm) port, 25.75” (65.4cm) long

Power Handling = 500W RMS

Box NotesBuilding

Use 3/4” (1.9cm) or thicker MDF (medium density fiberboard) and seal the joints with silicone. Use the

“template” inside your CompVR’s shipping carton to mark the mounting hole, then cut directly on the

line. These designs need internal bracing. Add triangular bracing between each of the larger

unsupported panels. See Figure 4.

All the cubic feet (L) measurements in this manual include the displacement of the woofer. For the

vented enclosures the displacement of the port must be calculated and added to the internal volume of

the final design. Use the outer dimensions of the port and multiply “X x Y x Z”, convert to cubic feet, for

example the CVR12 vented compact design’s external port dimensions are, using 3/4” (1.9cm) MDF:

[ (12.5” + 1.5” total MDF wall thickness) x (2.5” + 1.5” total MDF wall thickness) x 20”] x (1 ft

3/ 1728

in3) = .65 ft3, and add this number to the internal volume of the enclosure, CVR12’s 1.75 ft3+ .65 ft3=

2.4 ft3. See Figure 5. Due to the necessary length of these ports, you may want to fold the port along

the bottom and back walls. It will be impractical to use round ports for these designs.

Do not install a port opening against a solid surface, such as an internal brace, back-panel or trunk wall,

seat or interior panel of your vehicle. The port opening must remain unobstructed. Use the smallest

dimension of the rectangular port as the minimum amount of space between the port opening and any

solid surface to insure unrestricted airflow.

A Note on P CowerHandling apacity

CompVR subwoofers will handle massive amounts of power in any of the recommended enclosures,

minimum or maximum. The smaller enclosures are best for use in limited-space applications.

The larger recommended enclosures will yield slightly more bass at the lowest frequencies.

The listed Power Handling capacities assume that both voice coils are in use.

Always connect both coils in a dual voice-coil speaker.

If you prefer an ultra-smooth bass response, you should loosely fill your CompVR enclosure with

poly-fil stuffing. Ported designs will require covering the end of the port (located inside the box) with grill

cloth, chicken wire, or expanded metal to prevent the poly-fil from exiting the port. The use of poly-fil

will slightly decrease efficiency, but will deepen and extend the low frequency output.

For more advice on box building, refer to your Authorized Kicker Dealer, or click on the tab onSupport

the Kicker homepage, www.kicker.com. Choose the Technical Manuals link and then download or view

the corresponding information. Please E-mail or call Technical Services support@kicker.com

(405) 624-8583 for specific or unanswered questions.

Note: The use of a subsonic filter will significantly increase the power handling.

The power handling specifications in these charts are calculated using a 25Hz, 24dB per octave subsonic filter.

F uig re 5

D r 2 = 3 x 3 fo CVR15, CVR1

D 2 2 r 0 = x fo CVR1 , CVR8

F uig re 4

The displac me ent of t eh port must be a e t t e l e t e cal late ancu d d dd d o h internal vo um of h final esign d .

The dimensions for X , Y, and Z may v y b d oar ase n t e t i h h ckness of t eh m uaterial se rtd to ma e t ek h po .

Termékspecifikációk

Márka:	Kicker
Kategória:	mélynyomó
Modell:	CompVR CVR12

Szüksége van segítségre?

Ha segítségre van szüksége Kicker CompVR CVR12, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók mélynyomó Kicker

Kicker 51MWF104 Útmutató

14 Január 2025

Kicker 51MWF124 Útmutató

14 Január 2025

Kicker 48CWR154 Útmutató

12 Január 2025

Kicker 51MWE104 Útmutató

10 Január 2025

Kicker 51MWE124 Útmutató

10 Január 2025

Kicker 50CVX154 Útmutató

2 Január 2025

Kicker 50CVX124 Útmutató

2 Január 2025

Kicker 51CWQ102 Útmutató

24 Szeptember 2024

Kicker 51CWQ122 Útmutató

24 Szeptember 2024

Kicker 43C84 Útmutató

24 Szeptember 2024

Útmutatók mélynyomó

Legújabb útmutatók mélynyomó

Phase Technology IW200-II Útmutató

4 Április 2025

Wet Sounds ZERO 10 S4 XZ-W Útmutató

2 Április 2025

SoundTube CM1001D Útmutató

2 Április 2025

JL Audio FS108-W5 Útmutató

31 Március 2025

Phase Technology PL-12p Útmutató

30 Március 2025

ETON Graphit 8-2 Útmutató

19 Március 2025

ETON Graphit 8-4 Útmutató

19 Március 2025

ETON Graphit 10-4 Útmutató

19 Március 2025

ETON MW 10 FLAT Útmutató

19 Március 2025

ETON PW 8 Útmutató

19 Március 2025