Használati útmutató KeySonic KSM-5030M

KeySonic egér KSM-5030M

Olvassa el alább 📖 a magyar nyelvű használati útmutatót KeySonic KSM-5030M (12 oldal) a egér kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/12
Manual KSM-5030M
Hygienic silicone mouse
Handbuch KSM-5030M
Hygienemaus aus Silikon
Please read carefully the following information to prevent injuries, damage to material
and device as well as data loss:
Warning levels
Signal words and safety codes indicate the warning level and provide immediate information in
terms of the probability of occurrence as well as the type and severity of the consequences if the
measures to prevent hazards are not complied with.
Warns of a hazardous situation causing directly death or
serious injury.
Warns of a hazardous situation that cause potentially may
death or serious injury.
Warns of a hazardous situation that cause potentially may
minor injury.
Warns of a situation that cause material or potential may
environmental damage and disrupt operative processes.
1. Risk of electrical shock
Contact with parts conducting electricity
Risk of death by electrical shock
Read the operating instructions prior to use
Make sure the device has been de-energised prior to working on it
Do not remove contact protection panels
Avoid contact with conducting parts
Do not bring plug contacts in contact with pointed and metal objects
Use in intended environments only
Operate the device using a power unit meeting the specifications of the type plate only!
Keep the device/power unit away from humidity, liquid, vapour and dust
Do not modify the device
Do not connect the device during thunderstorms
Approach specialist retailers if you require repairs
DANGER
WARNING
CAUTION
IMPORTANT
WARNING
Safety information KSM-5030M
2. Hazards during assembly (if intended)
Sharp components
Potential injuries to fingers or hands during assembly (if intended)
• Read the operating instructions prior to assembly
Avoid coming into contact with sharp edges or pointed components
Do not force components together
Use suitable tools
Use potentially enclosed accessories and tools only
3. Hazards caused by a development of heat
Insufficient device/power unit ventilation
Overheating and failure of the device/power unit
Prevent externally heating up components and ensure an exchange of air
Do not cover the fan outlet and passive cooling elements
Avoid direct sunlight on the device/power unit
Guarantee sufficient ambient air for the device/power unit
Do not place objects on the device/power unit
4. Hazards caused by very small parts and packaging
Risk of suffocation
Risk of death by suffocation or swallowing
Keep small parts and accessories away from children
Store/dispose of plastic bags and packaging in an area that is inaccessible to children
Do not hand over small parts and packaging to children
5. Potential data loss
Data lost during commissioning
Potentially irreversible data loss
Always comply with the information in the operating instructions/quick installation guide
Exclusively use the product once the specifications have been met
Back up data prior to commissioning
Back up data prior to connecting new hardware
Use accessories enclosed with the product
6. Cleaning the device
Harmful cleaning agents
CAUTION
IMPORTANT
WARNING
IMPORTANT
IMPORTANT
Safety information KSM-5030M

Termékspecifikációk

Márka: KeySonic
Kategória: egér
Modell: KSM-5030M

Szüksége van segítségre?

Ha segítségre van szüksége KeySonic KSM-5030M, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók egér KeySonic

Útmutatók egér

Legújabb útmutatók egér

Dell

Dell MS700 Útmutató

11 December 2024
Dell

Dell MS900 Útmutató

11 December 2024
Trust

Trust Fyda Útmutató

9 December 2024
BenQ

BenQ FK1 Útmutató

9 December 2024
BenQ

BenQ EC1-A Útmutató

9 December 2024
BenQ

BenQ FK2 Útmutató

9 December 2024
BenQ

BenQ EC1-C Útmutató

9 December 2024
BenQ

BenQ ZOWIE FK1 Útmutató

9 December 2024
BenQ

BenQ ZOWIE EC1 Útmutató

9 December 2024
Rapoo

Rapoo 7200M Útmutató

9 December 2024