Használati útmutató Kettler 07132-000 TOP
Kettler
Asztalitenisz asztal
07132-000 TOP
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kettler 07132-000 TOP (17 oldal) a Asztalitenisz asztal kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/17
Montageanleitung Tischtennistisch
„TOP“ und „TOP STAR“
Art.-Nr. 07132-000/-400, 07172-000/-400/-800
Der Umwelt zuliebe: Wir drucken auf 100% Altpapier!
F
D
GB
NL
E
I
PL
US patent 7,197,990 & 6,990,910 Other patents pending
3
Assembly Instructions
Before assembling or using the table-tennis table, please read the following instructions carefully. They contain impor-
tant information for use and maintenance of the equipment as well as for your personal safety. Keep these instructions
in a safe place for maintenance purposes or for ordering spare parts.
All KETTLER products are designed in accordance with the latest safety regulations and undergo a constant process of quality control
during manufacturing. The knowledge gained in this process is used to constantly improve and develop our products. In order to offer
our customers the very best in product quality, we reserve the right to make technical changes at any time. In spite of this, should you
have any cause for complaint, please contact your KETTLER dealer.
GB
Note on Safety
IThe table-tennis table should be used only for its intended pur-
pose, i.e. for playing with suitable table-tennis bats and balls.
IAll other uses are prohibited and may be dangerous. The man-
ufacturer cannot be held liable for damage or injury caused by
improper use of the table.
IDamaged or worn components may endanger your safety or
shorten the lifespan of the table-tennis table. Replace worn or
damaged components immediately and remove the table from
use until this has been done. Use only spare parts manufactured
by KETTLER.
IThe table-tennis table complies with all safety regulations. In-
correct repairs, alterations to the design (removal of original
parts, addition of other components etc.) may endanger the
safety of the user.
IInstruct other persons (in particular children) using the table in
its correct use, and draw their attention to any potential source
of danger, especially when setting up or dismantling the table.
IWhen setting up or dismantling the table, stay clear of its fold-
ing radius.
IWhen folded up, the table-tennis table presents a large surface
to the wind. For this reason, ensure that it is stored in a shel-
tered position.
IThe table-tennis table may be pushed only into the transport po-
sition because there is otherwise a danger of injury.
IThe unit complies with the standard EN 14468–1:2004.
IDepending on frequency of use, check all screws, bolts etc. reg-
ularly to ensure that they are in good condition.
ICaution: While assembly of the product keep off children’s
reach (Choking hazard - contains small parts).
IIn case of enquiry, please contact your KETTLER dealer.
Handling the equipment
IDo not use the table-tennis table until it has been fully and cor-
rectly assembled and checked.
IEnsure that table-tennis tables which are not weatherproof are
not exposed to dampness or rain. Keep them well away from
direct sources of heat. Should the surface become warped, lay
the table on a level surface for a few days.
ISet the table up on a level surface.
IDo not cover it with plastic foil, under which condensation may
form. We recommend the weatherproof KETTLER tarpaulin, art.
no. 7032-300.
IFor practising without a partner, the table halves can be folded
up singly.
IFor more information on the sport of table-tennis, you are re-
ferred to the specialist literature on the subject.
IDo not use corrosive or abrasive materials to clean the equip-
ment. Ensure that such materials are not allowed to pollute the en-
vironment. In most cases, a slightly dampened cloth is sufficient.
IWaste Disposal: KETTLER products are recyclable. At the end of
its useful life please dispose of this article correctly and safely
(local refuse sites).
www.kettler.de
Assembly Instructions
GB
Instructions for Assembly
IThe equipment must be assembled with due care by two adult
persons.
IEnsure that you have received all the parts required (see check
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.
IBefore assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
IPlease note that there is always a danger of injury when work-
ing with tools or doing manual work. Therefore please be care-
ful when assembling this machine.
IEnsure that your working area is free of possible sources of dan-
ger, for example don’t leave any tools lying around. Always dis-
pose packaging material in such a way that it may not cause
any danger. There is always a risk of suffocation if children
play with plastic bags!
IThe fastening material required for each assembly step is shown
in the diagram inset. Use the fastening material exactly as in-
structed.
IBolt all the parts together loosely at first, and check that they
have been assembled correctly. Tighten the locknuts by hand
until resistance is felt, then use spanner to finally tighten nuts
completely against resistance (locking device). Then check that
all screw connections have been tightened firmly. Attention:
once locknuts have been unscrewed they no longer function cor-
rectly (the locking device is destroyed), and must be replaced.
IFor technical reasons, we reserve the right to carry out prelimi-
nary assembly work (e.g. addition of tubing plugs).
IPlease keep original packaging of this article, so that it may be
used for transport at a later date, if necessary. Goods may only be
returned after prior arrangement and in (internal) packaging, which
is safe for transportation, in the original box if possible. It is impor-
tant to provide a detailed defect description / damage report!
List of spare parts
When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the pro-
duct (see spare parts drawing).
Example order: Art. no. 07132-000 / spare-part no. 10100016
/ 2 pieces / S/N......
Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this
should be clearly stated on the order by adding the words „with
fastening material“.
KETTLER GB Ltd. · KETTLER House, Merse Road · North
Moons Moat · Redditch, Worcestershire B98 9HL
KETTLER International Inc. ·1355 London Bridge Road ·
Virginia Beach, VA 23453
http://www.kettler.de
USA
GB
Termékspecifikációk
| Márka: | Kettler |
| Kategória: | Asztalitenisz asztal |
| Modell: | 07132-000 TOP |
Szüksége van segítségre?
Ha segítségre van szüksége Kettler 07132-000 TOP, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Asztalitenisz asztal Kettler
23 Augusztus 2024
23 Augusztus 2024
22 Augusztus 2024
22 Augusztus 2024
22 Augusztus 2024
22 Augusztus 2024
22 Augusztus 2024
22 Augusztus 2024
22 Augusztus 2024
22 Augusztus 2024
Útmutatók Asztalitenisz asztal
Legújabb útmutatók Asztalitenisz asztal
12 Augusztus 2024
10 Augusztus 2024
9 Augusztus 2024
9 Augusztus 2024