Használati útmutató Kenwood ktf 2010

Kenwood Tuner erősítő ktf 2010

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kenwood ktf 2010 (20 oldal) a Tuner erősítő kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/20

FM/MW/LW TUNER

B60-3703-00 00 MA ( E2, T )

99/12 11 10 9 8 7 6 5 4 3 2 1 98/12 11 10 9 8 7 6 5 4 3 2 1

KENWOOD CORPORATION

INSTRUCTION MANUAL

KTF-2010

KTF-3010

KTF-3010/KTF-2010 (En)

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

Before applying power

Units are designed for operation as follows.

Europe , U.K. and Russia ......................................................... AC 230 V only

For the United Kingdom

Factory fitted moulded mains plug

1.The mains plug contains a fuse. For replacement, use only a 13-Amp ASTA-approved (BS 1362) fuse.

2.The fuse cover must be refitted when replacing the fuse in the moulded plug.

3.Do not cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach

a power point, then obtain an appropriate safety approved extension lead or adapter, or consult your dealer.

If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent

connection to the mains supply.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code.

Blue : Neutral

Brown : Live

Do not connect those leads to the earth terminal of a three-pin plug.

WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN

OR MOISTURE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSON-

NEL.

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO

THE PRESENCE OF UN INSULATED “DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT

MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPOR-

TANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost.

Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped

to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can file a claim against the carrier

for shipping damage.

We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future.

Accessories

Unpacking

Safety precautions

Caution : Read this page carefully to ensure safe

operation.

FM indoor antenna (1) AM loop antenna (1) Loop antenna stand (1) Audio cord (1) System control cord (1)

KTF-3010/KTF-2010 (En)

ACTIVE RECEPTION (A.R.) (KTF-3010 only)

When the receiving frequency changes by a tuning operation or recalling a preset station, the

tuner automatically switches the IF BAND, RF ATT and ANT A/B functions to obtain the optimum

reception conditions for the signals being received.

RDS (Radio Data System) & EON(Enhanced Other Network) reservation

The RDS makes it possible to select stations according to their program types (PTY search) and to

display the station names.

Moreover, the RDS automatic memory function which stores up to 40 RDS stations automatically

in the memory is featured. This function checks the RDS data when storing stations in the memory

to avoid storing stations which are broadcasting the same program simultaneously.

In addition, by using the EON function which administers the information of other stations, you

can reserve the desired information such as traffic announcement, news and so on, even though

these types of programs are not currently broadcast. While listening to a station which makes the

EON indicator light, the tuner automatically selects the station which starts broadcasting the

program of the desired information. When the program of the desired information ends, the tuner

automatically returns to the previous program.

If this tuner is connected to a KENWOOD amplifier with the system control cord, the amplifier

automatically switches the input source to the tuner input when the program of the reserved

information starts, even when you are listening to the input source other than the tuner.

STATION PRESET

This unit features a function which stores the broadcast station you are listening to with easy

operations and allows you to store a name for the station.

It is very convenient to register the desired stations. Also, you can recall the stations with easy

operations.

Contents

Before applying power ................................................................................................................................................................. 2

Before applying power.......................................................................................................................2

Safety precautions .............................................................................................................................2

Special features ........................................................................................................................................3

System connection ................................................................................................................................................................. 4

Controls and indicators ................................................................................................................................................................. 6

Useful functions for broadcast reception ................................................................................................................................................................. 7

Broadcast reception ................................................................................................................................................................. 8

Receiving a broadcast station (other than RDS stations)..........................................................................8

RDS (Radio Data System) ................................................................................................................................................................. 9

Storing broadcast stations in memory ............................................................................................................................................................... 10

Receiving a preset station ............................................................................................................................................................... 11

Entering broadcast station names ............................................................................................................................................................... 12

PTY search ............................................................................................................................................................... 13

EON reservation ............................................................................................................................................................... 15

In case of difficulty ............................................................................................................................................................... 16

Specifications ............................................................................................................................................................... 17

Special features

Caution : Read the pages marked carefully to ensure safe operation.