Használati útmutató Kelvinator MFF3015RW

Kelvinator nincs kategorizálva MFF3015RW

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kelvinator MFF3015RW (48 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/48

All about the

Use & Care

of your

TA B L E O F C O N T E N T S

Electric Range

316463004 Rev B (July 2013)

Important Safety Instructions 3-5 ...........................

Before Setting Surface Controls 6-9 ........................

Setting Surface Controls 10-11 ..............................

Before Setting Oven Controls 12 ............................

Oven Control Functions (100) 13 ............................

Setting Oven Controls 13-16 ..................................

Care & Cleaning 17-21 ..........................................

Before You Call 22-23 ...........................................

International Warranty Back Cover .........................

PRODUCT RECORD AND REGISTRATION

Contents

Serial plate location

Important Safety Instructions 3-5 ............................

Before Setting Surface Controls 6-9 ...........................

About the cooktop & radiant elements 6-7 ......................

Cookware material types ............................................. 8

Home canning 9 ...........................................................

Setting Surface Controls 10-11 ..................................

Setting single surface elements 10 .................................

Setting dual radiant surface elements 11 ........................

Before Setting Oven Controls 12 ................................

Removing, replacing & arranging the oven racks 12 ........

Oven Control Functions 13 .........................................

Setting Oven Controls 13-16 ......................................

Setting the clock 13 ......................................................

Changing oven temperature display (F° or C°) 13 ...........

Setting minute timer 14 .................................................

Setting bake ............................................................ 14

Setting broil 15 .............................................................

Adjusting oven temperature 16 ......................................

Operating oven light 16 .................................................

Care & Cleaning ................................................17-21

Cleaning recommendation table 17 ................................

Coil cooktop maintenance & cleaning 18 .........................

Ceramic glass cooktop maintenance & cleaning 19 ..........

Cautions for aluminum use 20 .......................................

Removing & replacing oven door 21 ...............................

Before You Call

Solutions to common problems 22-23 ............................

International Warranty Back Cover ...........................

Serial plate location:

open storage drawer (some models) or

remove lower front panel (some models).

Congratulations on your purchase of a new range! At

Electrolux Home Products, we are very proud of our

product and are completely committed to providing you

with the best service possible. Your satisfaction is our

number one priority.

We know you’ll enjoy your new range and for Thank You

choosing our product. We hope you consider us for future

purchases.

PLEASE CAREFULLY READ AND SAVE THESE

INSTRUCTIONS

This Use & Care Manual provides specific operating

instructions for your model. Use your range only as

instructed in this manual. These instructions are not meant

to cover every possible condition and situation that may

occur. Common sense and caution must be practiced when

installing, operating and maintaining any appliance.

Please record your model and serial numbers below

for future reference.

Model Number:

Serial Number:

Purchase Date:

This Use & Care Manual contains general operating

instructions for your range and feature information

for several models. Your range have all may not

the described features. The graphics shown are

representational. The graphics on your range may not look

exactly like those shown.

Read all instructions before using this appliance.

Do not attempt to install or operate your appliance un-

til you have read the safety precautions in this manual.

Safety items throughout this manual are labeled with a

WARNING or CAUTION statement based on the risk type.

WARNING indicates a potentially hazardous

situation which, if not avoided, may result in death

or serious injury.

Save these instructions for future reference.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

Stepping, leaning or sitting on the door or

drawers of a range can result in serious injuries

and also cause damage to the appliance. DO NOT

allow children to climb or play around the range. The

weight of a child on an open oven door may cause the

range to tip, resulting in serious burns or other injury.

Never use your appliance for warming or heating

the room.

Do not use the oven, warmer drawer or lower

oven for storage.(if equipped)

This is the safety alert symbol. It is used to alert you to

potential personal injury hazards. Obey all safety messages

that follow this symbol to avoid possible injury or death.

IMPORTANT

CAUTION indicates a potentially hazardous

situation which, if not avoided, may result in minor

or moderate injury.

CAUTION

IMPORTANT indicates installation, operation, maintenance

or valuable information that is not hazard related.

Denitions

Ask your dealer to recommend a qualied technician and

an authorized repair service. Know how to disconnect the

power to the range at the circuit breaker or fuse box in

case of an emergency.

• Remove the oven door from any unused range if

it is to be stored or discarded.

• Remove all tape and packaging before using

the range. Destroy the carton and plastic bags after

unpacking the range. Never allow children to play with

packaging material.

• Proper installation—Be sure your appliance is

properly installed and grounded by a qualied

technician in accordance with the National

Electrical Code ANSI/NFPA No. 70 latest edition

and local electrical code requirements. Install only

per installation instructions provided in the literature

package for this range.

• User servicing—Do not repair or replace any part

of the appliance unless specically recommended

in the manuals. All other servicing should be done

only by a qualied technician. This may reduce the risk

of personal injury and damage to the range.

• Never modify or alter the construction of a range

by removing the leveling legs, panels, wire

covers, anti-tip brackets/screws, or any other

part of the range.

WARNING

Tip Over Hazard

• A child or adult can tip the

range and be killed.

• Verify the anti-tip device has

been installed to oor or wall.

To check if the anti-tip bracket is installed properly,

use both arms and grasp the rear edge of range back.

Carefully attempt to tilt range forward. When properly

installed, the range should not tilt forward.

Refer to the anti-tip bracket installation instructions

supplied with your range for proper installation.

• Ensure the anti-tip device is re-engaged when

the range is moved to oor or wall.

• Do not operate the range without the anti-tip

device in place and engaged.

• Failure to follow these instructions can result in

death or serious burns to children and adults.

Range

leveling leg Anti-Tip

bracket

CAUTION

• Do not store items of interest to children in the

cabinets above a range or on the backguard of

the range. Children climbing on the range to reach

items could be seriously injured.

• Do not touch surface heating units or surface

cooking elements, areas near these units or

elements, or interior surface of the oven. Both

surface heating and oven heating elements may be

hot even though they are dark in color. Areas near

surface cooking units may become hot enough to

cause burns. During and after use, do not touch, or

let clothing or other ammable materials touch these

areas until they have had sufcient time to cool.

Among these areas are the cook top, surfaces facing

the cook top, the oven vent openings and surfaces

near these openings, oven door and oven door

window.

• Wear proper apparel—loose-tting or hanging

garments should never be worn while using the

appliance. Do not let clothing or other ammable

materials contact hot surfaces.

• Do not use water or our on grease res—

smother the re with a pan lid, or use baking

soda, a dry chemical or foam-type extinguisher.

• When heating fat or grease, watch it closely. Fat

or grease may catch re if allowed to become too hot.

• Use dry potholders - moist or damp potholders on

hot surfaces may result in burns from steam. Do

not let potholders touch hot heating elements. Do not

use a towel or other bulky cloth instead of a potholder.

• Do not heat unopened food containers - buildup

of pressure may cause container to burst and

result in injury.

IMPORTANT INSTRUCTIONS FOR USING

YOUR OVEN

• Use care when opening oven door , lower oven

door or warmer drawer (if equipped)—Stand to

the side of the range when opening the door of a hot

oven. Let hot air or steam escape before you remove or

replace food in the oven.

• Keep oven vent ducts unobstructed. The oven vent

is located under the left rear surface element if your

model is equipped with coil elements. The oven vent

is located below the backguard for models equipped

with ceramic-glass cook tops. Touching the surfaces in

this area when the oven is operating may cause severe

burns. Also, do not place plastic or heat-sensitive items

on or near the oven vent. These items could melt or

ignite.

• Placement of interior oven racks. Always place

oven racks in desired location while oven is cool. If rack

must be moved while oven is hot use extreme caution.

Use potholders and grasp the rack with both hands to

reposition. Do not let potholders contact the hot heating

elements in the oven. Remove all utensils from the rack

before moving.

• Do not use the broiler pan without its insert. The

broiler pan and its insert allow dripping fat to drain

and be kept away from the high heat of the broiler. Do

not cover the broiler insert with aluminum foil.

Exposed fat and grease could ignite.

• Protective liners—Do not use aluminum foil to line the

oven bottom. Only use aluminum foil as recommended

in this manual. Improper installation of these liners may

result in risk of electric shock, or re.

Do not attempt to operate the range during a

power failure. If the power fails, always turn off the

range. If the range is not turned off and the power

resumes, the range will begin to operate again. Once

the power resumes, reset the clock and oven function.

IMPORTANT

• Storage in or on appliance—ammable

materials should not be stored in an oven,

warmer drawer, near surface units or in the

storage drawer. This includes paper, plastic and

cloth items, such as cookbooks, plasticware and

towels, as well as ammable liquids. Do not store

explosives, such as aerosol cans, on or near the range.

• DO NOT LEAVE CHILDREN ALONE—children

should not be left alone or unattended in the

area where appliance is in use. They should

never be allowed to sit or stand on any part of the

appliance, including the storage drawer, lower broiler

drawer, warmer drawer or lower double oven.

WARNING

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT INSTRUCTIONS FOR USING

YOUR COOKTOP

• Know which knob controls each surface heating

unit. Place a pan of food on the unit before turning it

on, and turn the unit off before removing the pan.

• Use proper pan size—This appliance is equipped

with one or more surface units of different sizes. Select

utensils having at bottoms large enough to cover the

surface unit heating element. The use of undersized

utensils will expose a portion of the heating element

to direct contact and may result in ignition of clothing.

Proper relationship of utensil to element will also

improve efciency.

• Utensil handles should be turned inward and not

extend over adjacent surface elements—To reduce

the risk of burns, ignition of ammable materials, and

spillage due to unintentional contact with the utensil,

the handle of the utensil should be positioned so that

it is turned inward, and does not extend over adjacent

surface units.

• Never leave surface elements unattended at high

heat settings—Boilovers cause smoking and greasy

spillovers that may ignite, or a pan that has boiled dry

may melt.

• Do not immerse or soak removable heating

elements—Heating elements should never be

immersed in water. Heating elements clean themselves

during normal operation.

• Glazed cooking utensils—Only certain types of

glass, glass/ceramic, ceramic, earthenware, or other

glazed utensils are suitable for cook top service without

breaking due to the sudden change in temperature.

Check the manufacturer’s recommendations for cook top

use.

• When aming foods under a ventilating hood,

turn the fan on.

IMPORTANT INSTRUCTIONS FOR CLEANING

YOUR RANGE

• Clean the range regularly to keep all parts free of

grease that could catch re. Pay particular attention

to the area around each surface element. Do not allow

grease to accumulate.

• Kitchen cleaners and aerosols—Always follow the

manufacturer’s recommended directions for use.

Be aware that excess residue from cleaners and aerosols

may ignite causing damage and injury.

• Clean ventilating hoods frequently—Grease

should not be allowed to accumulate on the hood

or lter. Follow the manufacturer’s instructions for

cleaning hoods.

FOR CERAMIC-GLASS COOK TOP MODELS

• Do not cook on broken cook top—If cook top should

break, cleaning solutions and spillovers may penetrate

the broken cook top and create a risk of electric shock.

Contact a qualied technician immediately.

• Clean cook top with caution—If a wet sponge or

cloth is used to wipe spills on a hot cooking area, be

careful to avoid a steam burn. Some cleaners can

produce noxious fumes if applied to a hot surface.

IMPORTANT SAFETY NOTICE

The California Safe Drinking Water and Toxic Enforcement

Act requires the Governor of California to publish a

list of substances known to the state to cause cancer,

birth defects or other reproductive harm, and requires

businesses to warn customers of potential exposure to

such substances.

COIL COOK TOP MODELS

• Make Sure Reector Pans or Drip Bowls Are in

Place—Absence of these pans or bowls during cooking

may subject wiring or components underneath to

damage.

• Protective Liners—Do not use aluminum foil to line

surface unit drip bowls, or reector pans. Only use

aluminum foil as recommended in this manual. Improper

installation of these liners may result in risk of electric

shock, or re. Improper installation of these liners may

result in risk of electric shock, or re.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

• Children should be supervised to ensure that

they do not play with the appliance.

• This appliance is not intended for use by persons

(including children) with reduced physical, sensory,

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of this appliance by a

person responsible for their safety.

BEFORE SETTING SURFACE CONTROLS

Ceramic glass cooktop models

The oven vent is located under the left side of the

control panel (See Fig. 2).

Oven vent location

Coil cooktop models

The oven vent is located under the left rear surface

element (See Fig. 1).

When the oven is on, warm air passes through this vent.

This venting is necessary for proper air circulation in the

oven and good baking results. Do not block the oven

vent.

oven vent location

Fig. 2

oven vent located

under left rear element

Fig. 1

NOTES

Be sure to read the detailed instructions for ceramic

glass cooktop cleaning in the and Care & Cleaning

Before You Call checklist sections of this Use & Care

Manual.

Radiant elements have a limiter that allows the element

to cycle ON and OFF, even at the HI setting. This helps

to prevent damage to the ceramic smoothtop. Cycling

at the HI setting is normal and will occur more often if

the cookware is too small for the radiant element or if

the cookware bottom is not at.

About ceramic glass cooktops (some models)

A ceramic cooktop has radiant surface elements located

below the surface of the glass. The design of the

ceramic cooktop outlines the area of the surface element

underneath. Be sure to match the pan size with the

diameter of the element outline on the cooktop and only

at-bottomed cookware should be used.

The element temperature rises gradually and evenly.

As the temperature rises, the element will glow red. To

maintain the selected setting the element will cycle ON

and OFF. The heating element retains enough heat to

provide a uniform and consistent heat during the off cycle.

About surface elements

For efcient cooking, turn OFF the element several

minutes before cooking is complete. This will allow residual

heat to complete the cooking process.

The type and size of cookware, the number of surface

elements in use and their settings are all factors that will

affect the amount of heat that will spread to areas beyond

the surface elements. The areas surrounding the elements

may become hot enough to cause burns.

BEFORE SETTING SURFACE CONTROLS

Element on & hot surface indicator lights

Ceramic glass cooktops (some models)

Your appliance is equipped with two different types of

radiant surface control indicator lights that will glow on

the control panel — the indicator and the on hot surface

indicator lights.

The element indicator light will glow when any surface on

element is turned ON. A quick glance at this indicator

light after cooking is an easy check to be sure the surface

controls are turned OFF (See Fig. 1).

The hot surface indicator light will glow when any surface

cooking area heats up and will until the glass remain on

cooktop has cooled to a level (See Fig. 2).MODERATE

Types of ceramic cooktop elements

(some models)

The ceramic glass cooktop has radiant surface elements

located below the surface of the glass. The patterns on the

ceramic glass outline the size and type of element available.

The single radiant element has one round outline pattern

shown. The radiant element has two outline patterns. dual

The dual radiant element may be set using only the smaller

inner element or both inner and outer elements may be set

to heat together for a larger surface (See Fig. 3).

Dual radiant

surface control

(some models)

Fig. 3

Single radiant

surface control

element ON indicator light

Fig. 1

Fig. 2

hot surface indicator light

BEFORE SETTING SURFACE CONTROLS

Cookware material types

The cookware material determines how evenly and quickly

heat is transferred from the surface element to the pan

bottom. The most popular materials available are:

Aluminum - Excellent heat conductor. Some types of

food will cause it to darken (Anodized aluminum cookware

resists staining and pitting). If aluminum pans slide across

the ceramic cooktop, they may leave metal marks which

will resemble scratches. Remove these marks immediately.

Copper - Excellent heat conductor but discolors easily.

May leave metal marks on ceramic glass (see Aluminum).

Stainless - Slow heat conductor with uneven cooking

results. Is durable, easy to clean and resists staining.

Cast Iron - A slow heat conductor but will retain heat very

well. Cooks evenly once cooking temperature is reached.

Not recommended for use on ceramic cooktops.

Porcelain-enamel on metal - Heating characteristics will

vary depending on base material. Porcelain-enamel coating

must be smooth to avoid scratching ceramic cooktops.

Glass - Slow heat conductor. Not recommended for

ceramic cooktop surfaces because it may scratch the glass.

Using proper cookware

The size and type of cookware used will inuence the

setting needed for best cooking results. Be sure to follow

the recommendations for using proper cookware as

illustrated in Figs. 1 and 2.

Cookware should have at bottoms that make good contact

with the entire surface heating element (See Fig. 1). Check

for atness by rotating a ruler across the bottom of the

cookware (See Fig. 2). For more information about the

ceramic cooktop see “Cooktop cleaning & maintenance” in

the Care & Cleaning section.

Fig. 1

Fig. 2

• Flat bottom straightand

sides.

• Tight fitting lids.

• Weight handle notof does

tilt iscookware. Cookware

well balanced.

• Cookware esize matches th

amount of food beto

prepared size and the of

the surface element.

• Made of material that

conducts heat well.

• Easy to clean.

• Always cookwarematch

bottom to element

diameter or cooktop area

diameter.

• Curved panand warped

bottoms.

• Cookware larger than element

or cooktop area by more than

1/2 inch (12 mm).

• Cookware smaller is than

e .lement or cooktop area

• Cookware weight notis

balanced.

BEFORE SETTING SURFACE CONTROLS

Home Canning

Be sure to read and observe all the following points when

home canning with your appliance. Check with the USDA

(United States Department of Agriculture) website and

be sure to read all the information they have available as

well as follow their recommendations for home canning

procedures.

• Use only quality at bottom canners when home

canning. Use a straight-edge to check canner bottom

(see “Cookware material types” in the Before setting

surface controls section).

• Use only a with no completely at bottom canner

ridges that radiate from the bottom center when home

canning using a ceramic cooktop.

• Make sure the diameter of the canner does

not exceed 1 inch beyond the surface element

markings or coil element. It is recommended to use

smaller diameter canners on electric coil and ceramic

glass cooktops.

• Start with hot tap water to bring water to boil more

quickly.

• Use the highest heat seating when rst bringing the

water to a boil. Once boiling is achieved, reduce heat to

lowest possible setting to maintain that boil.

IMPORTANT

NEVER place or straddle a cooking utensil over two

different surface cooking areas at the same time. This

can cause uneven heating results.

Placing or straddling a cooking utensil over two cooking

areas may cause a ceramic cooktop to fracture.

SETTING SURFACE CONTROLS

Single surface elements

To operate the single element:

1. Place correctly sized cookware on single surface

element.

2. Push in and turn the surface control knob in either

direction (Fig. 2) to the desired setting (Refer to the

Suggested surface element settings table, Fig. 1).

Start most cooking operations on a higher setting and

then turn to a lower setting to nish cooking. The

surface control knobs do not have to be set exactly on

a particular spot. Use the graphics provided as a guide

and adjust the control knob as needed (See Fig. 2).

Each surface element provides a constant amount of

heat at each setting.

3. When cooking is complete, turn the surface element

OFF before removing the cookware.

The suggested settings found in Fig.1 below are based

when cooking with medium-weight aluminum pans with

lids. Settings may vary when using other types of pans.

Suggested surface element settings

Fig. 1

Suggested surface element settings table

Settings Type of cooking

High (HI - 9) Start most foods, bring water to a

boil, pan broiling

Medium high (7 - 8) Continue a rapid boil, fry, deep fat fry

Medium (5 - 6) Maintain a slow boil, thicken sauces

and gravies or steam vegetables

Medium Low (2 - 4) Keep foods cooking, poach, stew

Low (LO - 1) Keep warm, melt, simmer

Fig. 2

The size and type of utensil used, and the amount and

type of food being cooked will inuence the setting

needed for best cooking results.

NOTES

The indicator light will glow when one or more on

elements are turned ON. A quick glance at this indicator

light when cooking is nished is an easy check to be

sure all control knobs are turned OFF (some models).

On ceramic glass cooktops (some models) a glowing red

surface heating area extending beyond the bottom edge

of the cookware indicates the cookware is for too small

the surface heating area.

Do not place ammable items such as plastic salt and

pepper shakers, spoon holders or plastic wrappings on

top of the range when it is in use. These items could melt

or ignite. Potholders, towels or wooden spoons could

catch re if placed too close to the surface elements.

CAUTION

SETTING SURFACE CONTROLS

Heating with inner (small)

element only

Heating with both

elements

Fig. 1 Fig. 2

Dual radiant surface elements

Ceramic glass cooktops only (some models)

Symbols on the backguard indicate which coil of the dual

radiant element will heat. The symbol indicates the

inner coil only (See Fig. 1). The symbol indicates both

inner and outer coils will heat (See Fig. 2).

You may switch from either coil setting at any time during

cooking. See Suggested surface element settings

table on previous page.

To operate a dual radiant element:

1. Place correctly sized cookware on dual radiant surface

element.

2. Push in and turn the surface control knob clockwise

to begin heating both the inner and outer portions of

the dual element. If only the inner heating portion is

needed like for smaller cookware, push in and turn the

knob counter-clockwise to start.

3. When cooking is complete, turn the dual radiant

surface element OFF before removing the cookware.

Areas that heat are shown

darkened.

Start most cooking operations on a higher setting and then

turn to a lower setting to nish cooking. The surface control

knobs do not have to be set exactly on a particular mark.

Use the marks as a guide and adjust the control knob as

needed. A glowing red surface heating area extending

beyond the bottom edge of the cookware indicates the

cookware is for the surface heating area.too small

Surface elements may appear to have cooled after they

have been turned off. The surface may still be hot

and burns may occur if the surface is touched before it

has cooled.

On ceramic glass cooktops, the indicator hot surface

light will continue to glow AFTER the control knob

is turned to the OFF position and will glow until the

heating surface area has cooled.

CAUTION

IMPORTANT

Do not allow aluminum foil, or ANY material that

can melt to make contact with the heating elements

or ceramic glass cooktop. If these items melt they will

damage the ceramic cooktop.

BEFORE SETTING OVEN CONTROLS

Air circulation in the oven

For best baking results allow 2-4” (5-10 cm) around the

cookware for proper air circulation and be sure pans and

cookware do not touch each other, the oven door, sides or

back of the oven cavity. Hot air must be able to circulate

around the pans and cookware in the oven for even heat

to reach around the food.

Removing, replacing & arranging racks

To remove - pull the rack forward until it stops. Lift up

front of rack and slide out.

To replace - t the rack onto the guides on the oven

walls. Tilt the front of the rack upward and slide the rack

back into place.

Arranging - always arrange the oven racks when the

oven is cool (prior to operating the oven).

Types of oven racks

Your range may be equipped with one or more of the oven

rack styles shown.

at

oven rack

at handle

oven rack

offset

oven rack

The or (some at oven rack at handle oven rack

models) may be used for most cooking needs.

The (some models) is designed to place offset oven rack

the base of the rack about 1/2 of a rack position lower

than normal. This rack design provides several additional

possible locations between the standard positions.

Always use oven mitts when using the oven.

When using the appliance, oven racks and cooktop will

become very hot which can cause burns.

CAUTION

Fig. 1

Recommended rack positions by food type

Food type Position

(See Fig. 1)

Broiling meats See broil

Cookies, cakes, pies, biscuits & mufns 2 or 3

Frozen pies, angel food cake, yeast, bread

and casseroles 1 or 2

Small cuts of meat or poultry 1 or 2

Turkey, roast or ham 1

Baking layer cakes with 1 or 2 oven racks

For best results when baking cakes using 2 at oven racks,

place cookware on rack positions 2 & 5 (See Fig. 2). For

best results when using a single oven at rack, place

cookware on rack positions 2, 3 or 4 (See Fig. 3).

Fig. 2

Fig. 3

OVEN CONTROL FUNCTIONS

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.

For satisfactory use of your oven, become familiar with the various pad features and functions of the oven as described below.

Up and down arrow

pads— Use with the

feature or function pads

to set oven temperature

or adjusting the clock

and minute timer.

Broil pad— Use to select the

variable broil feature.

Bake pad—Use to select the

bake feature.

Feature indicator lights—

These indicator lights show if

bake or broil is active.

Clock pad— Use to

set the time of day.

Clear off pad— Use to clear any feature previously

entered except the time of day and minute timer.

Press to stop cooking.clear off

Timer on-off pad— Use to set or cancel the

minute timer. The minute timer does not start

or stop cooking.

Changing the temperature display mode

(°F or °C)

The electronic oven control is set to display °F (Fahrenheit)

when shipped from the factory. The display may be

changed to show either Fahrenheit or Celsius oven

temperatures.

Setting the clock

When the appliance is rst plugged in or when the power

supply to the appliance has been interrupted, the display

will ash “12:00”. It is recommended to always set the clock

for the correct time of day before using the appliance.

To set the clock:

1. Press clock once (do not hold key pad down).

2. Within 5 seconds, press and hold the or until

the correct time of day appears in the display.

SETTING OVEN CONTROLS

To change the temperature display mode from °F

to °C (Celsius) or from °C to °F (Fahrenheit).

1. Press and hold (for 6-8 seconds) until F or C broil

appears in the display. At this time the display will

show the current temperature display mode whether

set for F or C. Before proceeding read the notes below.

2. Press either or key pad to toggle between F

(Fahrenheit) or (Celsius) mode choices.C

3. To accept the change, wait until the oven control

provides the acceptance beep (See below).Notes

4. The display will return to the time of day with the

temperature display mode changed the next time the

oven is set for bake or broil.

NOTES

• If at any time during the process of changing the

temperature display mode you decide not to change

the mode, press the key pad once before clear off

the acceptance beep.

• The temperature display mode cannot be changed

when or is active.bake broil

SETTING OVEN CONTROLS

Setting the minute timer

1. Press timer on-off.

2. Press the to increase the time in one minute

increments. Press and hold the to increase the

time in 10 minute increments. The timer can be set for

any amount of time from 1 minute to 11 hours and 59

minutes.

If theNote: pad is pressed rst, the timer will

advance to 11 hours and 59 minutes.

3. When the set time has run out, the timer will sound

a 3 second tone. 0:00 will show in the display until

timer on-off is pressed.

To change the timer while it is in use

While the timer is active and shows in the display, press

and hold the or to increase or decrease the time

remaining.

To cancel the minute timer before the set time has run

out press once .timer on-off

Setting bake

The oven can be programmed to bake at any temperature

from 170°F to 550°F (77°C to 287°C). The factory preset

bake temperature is 350°F (177°C).

To set bake

1. Press bake. “— — —” appears in the display.

2. Within 5 seconds, press the . The display or

will show “350°F (177°C).” By pressing and holding

the , the temperature can then be adjusted or

in 5°F increments (1°C if the control is set to display

Celsius).

3. As soon as the pad is released, the oven or

will begin preheating to the selected temperature.

When the oven reaches the desired baking

temperature, the control will beep once.

To change the oven temperature after bake has

started

1. Press bake. Visually check the bake temperature and

that it needs to be changed.

2. Press the or pad to increase or decrease the

set temperature to the desired new oven temperature.

NOTES

• will not The minute timer start or stop the cooking

process. It serves as an extra timer in the kitchen that

will beep when the set time has run out. The minute

timer can be used alone or while using any of the

other oven features.

• If another feature is active when the minute timer is

active, the minute timer will show in the display. To

view information about other active features, press the

pad for that feature.

Dark or dull pans absorb more heat than shiny bakeware

resulting in dark or overbrowning of foods. It may be

necessary to reduce the oven temperature or cook time

to prevent overbrowning of some foods. Dark pans are

recommended for pies. Shiny pans are recommended

for cakes, cookies and mufns.

IMPORTANT

NOTE

To cancel baking at any time, press . clear off

Do not cook foods directly on oven bottom. To avoid

damaging the oven interior always cook foods inside the

oven using cookware positioned on an oven rack.

CAUTION

SETTING OVEN CONTROLS

To set Broil

1. Arrange the oven rack while oven is still cool. Position

the oven rack as needed.

2. Press broil — — . “ “ will appear in display.

3. Press and hold the or until the desired broil

setting level appears in the display. Press the

for broil or the for broil. Most foods may HI LO

be broiled at the broil setting. Select the broil HI LO

setting to avoid excess browning or drying of foods

that should be cooked to the well-done stage.

4. For optimum results, preheat oven for 5 minutes

before adding food.

5. Place the insert on the broil pan (some models; Fig. 2),

then place the food on the broil pan insert.

6. Place the broiler pan and insert on the oven rack.

7. Open the oven door to the broil stop position when

broiling.

8. Broil on one side until food is browned. Turn and broil

food on other side.

9. When broiling is nished press clear off.

Setting broil

NOTE

Always pull the oven rack out to the stop position

before turning or removing the food.

CAUTION

• The broiler pan and the insert (some models) allows

grease to drain and be kept away from the high heat

of the broiler. use the pan without the insert. DO NOT

DO NOT aluminum foilcover the insert with ; the

exposed grease could ignite.

• To insure proper results when broiling use ONLY

Electrolux Home Products, Inc. approved broil pan and

insert.

WARNING

Should an oven re occur, close the oven door and turn

the oven OFF. If the re continues, use a re extinguisher.

DO NOT put water or our on the re. Flour may be

explosive.

Use the broil feature to cook meats that require direct

exposure to radiant heat for optimum browning results.

When broiling always remember to arrange the oven

racks while oven is still cool.

For medium done steaks, position the oven rack closer to

the broil element (positions 4 or 5, See Fig. 1). For well-

done foods such as chicken, sh, lobster or thick cuts of

meat, position the oven rack further from the broil element.

Insert

Broil pan

Fig. 1 Fig. 2

SETTING OVEN CONTROLS

Adjusting oven temperature

Your appliance has been factory calibrated and tested

to ensure an accurate baking temperature. For the rst

few uses, follow your recipe times and temperature

recommendations carefully. If you think the oven is

cooking too hot or too cool for your recipe times, you can

adjust the control so the oven cooks hotter or cooler than

the temperature displayed.

To adjust oven temperature

1. Press & hold the key pad and release after the bake

display shows the factory temperature setting of 00.

If the oven temperature has been previously adjusted

from the factory setting, the latest adjusted value will

appear in the display instead.

2. You may increase the oven temperature in 5°F

increments with each press of the key pad. You

may also adjust the oven temperature downward in

5°F increments with each press of the key pad

(total adjustment range is +35°F to -35° F).

3. To accept the change, wait until the oven control

provides the acceptance beep ( ).See Notes

4. The oven temperature adjustment has been accepted

by the oven control and the display will return to the

time of day.

Operating oven light (some models)

The interior oven light will automatically turn ON when the

oven door is opened. Press the oven light switch located

on the upper left control panel to turn the interior oven

light ON and OFF whenever the oven door is closed.

• If at any time during the process of adjusting the

oven temperature feature you decide not to make the

change, press the key pad once before the clear off

acceptance beep.

• The oven temperature adjustment feature can not be

modied if bake broilor is active.

• The oven temperature adjustment may be made

if your oven control has been set for °C (Celsius)

temperature display mode. In this case each

press of the or key pad will adjust in 1°C

increments upward (maximum +18°C) or downward

(maximum -18°C), depending on which arrow key pad

is pressed.

• DO NOT USE oven thermometers such as those

found in grocery stores to check the temperature

settings inside your oven. These oven thermometers

may vary as much as 20 to 40 degrees from actual

temperatures.

NOTES

oven light switch

CARE & CLEANING

• Cooktop

• Control panel

• (some models)Decorative trim

Surface type Recommendation

• Oven interior & door liner

• Porcelain enamel broiler pan

and broiler pan insert

(some models)

For general cleaning, use hot, soapy water and a cloth. For more difcult soils and

built-up grease, apply a liquid detergent directly onto the soil. Leave on soil for 30

to 60 minutes. Rinse with a damp cloth and dry. use abrasive cleaners on Do not

these surfaces; they can scratch. To remove control knobs, turn to the OFF position,

grasp rmly and pull straight off the shaft. To replace knobs after cleaning, line up

the at sides of both the knob and the shaft, then push the knob into place.

Before cleaning the control panel, turn all controls OFF. If needed, remove any

knobs from the panel. Clean using hot, soapy water and a cloth. Squeeze excess

water from the cloth before wiping the control panel, especially when wiping

around the controls area. Excess water in or around the controls may cause

damage to the appliance. Rinse with clean water and a cloth, squeeze excess water

from cloth before wiping the control panel.

• Control knobs

• Painted body parts

• Painted decorative trim

• Aluminum, plastic or vinyl trim

pieces

Gentle scouring with soap and a non-abrasive scouring pad will remove most spots.

Rinse with a 1:1 solution of clear water and ammonia. If necessary, cover difcult

spots with an ammonia-soaked paper towel for 30 to 40 minutes. Rinse with clean

water and a damp cloth, then scrub with soap and a non-abrasive scouring pad.

Rinse and wipe dry with a clean cloth. Do not allow food spills with a high sugar or

acid content (milk, tomatoes, sauerkraut, fruit juices or pie lling) to remain on the

surface; they may cause a dull spot even after cleaning.

The oven interior is porcelain-coated and is safe to clean using oven cleaners

following manufacturer’s instructions. After cleaning, remove any oven cleaner or the

porcelain may become damaged during future heating. spray oven cleaner Do not

on any electrical controls or switches. spray or allow oven cleaner to build up Do not

on the oven temperature sensing bulb. spray cleaner on oven door trim, door Do not

gasket, plastic drawer glides, handles or any exterior surfaces of the range.

Clean any soils from the oven frame, the door liner outside the oven door gasket

and the small area at the front center of the oven bottom. Clean with hot, soapy

water. Rinse using clean water and a cloth.

• (some models)Stainless Steel

• Oven racks

• Oven door

Remove oven racks from oven before cleaning. Clean by using a mild, abrasive

cleaner following manufacturer’s instructions. Rinse with clean water and dry.

Use soap and water to thoroughly clean the top, sides and front of the oven door.

Rinse well. Glass cleaner may be used on the outside glass of the oven door. Do

not immerse the door in water. Do not spray or allow water or glass cleaner

to enter the door vents. Do not use oven cleaners, cleaning powders or any

harsh abrasive cleaning materials on the outside of the oven door.

Cleaning recommendation table

Clean heavier soils with hot, soapy water and a cloth. Rinse with clean water and a

cloth. Do not use cleaners with high concentrations of chlorides or chlorine.

Do not use harsh scrubbing cleaners. Only use cleaners that are especially made for

cleaning stainless steel. Always be sure to completely wipe cleaner residue from the

surface; bluish stains may occur during heating that cannot be removed.

Do not use spray oven cleaners on the cooktop. See cooktop cleaning and

maintenance in the section.Care & Cleaning

Coil cooktop surface elements and drip

bowls cleaning (some models)

To remove the surface elements and drip bowls

1. Lift the edge of the drip bowl across from the terminal

end. Lift the surface element and drip bowl

together just enough to clear the cooktop.

2. While holding the drip bowl and surface element, gently

pull the terminal end out from terminal plug. DO NOT

remove hold down clip (if equipped) from the drip bowl.

Surface elements may be unplugged and removed to make

cleaning the drip pans easier. The surface elements clean

themselves when they are turned on. Food spilled on a hot

element will burn off. Food spilled on a COOL element may

be cleaned with a damp cloth—any remaining soil will burn

off the next time the element is used.

Cleaning drip bowls

Wash in hot, soapy water or in the dishwasher. Rinse and

dry while still warm. Hard to remove soils can be removed

by soaking the drip bowls for about 20 minutes in a lightly

diluted liquid cleanser or a solution of ammonia and water

(1/2 cup ammonia to 1 gallon of water). A nylon scrubber

may be used after soaking. use abrasive cleaners DO NOT

or steel wool, they will scratch the surface. Always rinse

with clean water and polish dry with a soft cloth.

To replace drip bowls and surface elements

1. Slide the terminal end on the element through the

opening in the drip bowl (See Fig. 1).

2. Align the element support to rest on the rim inside

the drip bowl. If your drip bowl is equipped with a

hold down clip, align the element support opposite the

terminal end with the slot in the hold down clip, and

snap into place.

3. After the element is positioned in the drip bowl, line

up the terminal end with the terminal plug as shown.

4. Hold the surface element and drip bowl together as

level as possible and rmly push the terminal end

into the terminal plug. Make sure element terminal

is seated properly into terminal plug. Make sure the

surface element is level to reduce the hazard of pans

sliding off the element.

Terminal plug

Terminal end

Hold

down

clip

(if equipped)

Element

support

Allow element

support to rest

on drip pan inside

rim.

Fig. 1

CAUTION

• - Absence of Make sure drip bowls are in place

these bowls during cooking may subject wiring or

components underneath to damage.

• Never immerse a surface element in water.

• Be sure the range is cool before removing surface

elements or drip bowls. Be careful not to bend terminal

ends when replacing surface elements after cleaning.

• —Do not use aluminum foil to Protective liners

line surface drip bowls, or reector pans. Only use

aluminum foil as recommended in this manual.

Improper installation of these liners may result in risk

of electric shock, or re.

CARE & CLEANING

Ceramic glass cooktop maintenance

(some models)

Ceramic glass cooktop cleaning

(some models)

CARE & CLEANING

Do not:

• Slide anything metal or glass across the cooktop.

• Use cookware with dirt or dirt build up on bottom;

replace with clean cookware before using.

• Use your cooktop as a cutting board or work surface in

the kitchen.

• Cook foods directly on the cooktop surface without a pan.

• Drop heavy or hard objects on the ceramic glass

cooktop, they may cause it to crack.

Prior to using your cooktop for the rst time, apply some of

the glass-ceramic cooktop cleaner supplied with your new

appliance. Buff with a cloth or no-scratch non-abrasive

cleaning pad. This will make cleaning easier when soiled

from cooking. The special cooktop cleaning cream leaves a

protective nish on the glass to help prevent scratches and

abrasions.

Sliding aluminum or copper clad bottom pans on the

cooktop can cause metal markings on the cooktop surface.

These marks should be removed after the immediately

cooktop has cooled using the cooktop cleaning cream.

Metal marks can become permanent if not removed prior

to future use.

Cookware (cast iron, metal, ceramic or glass) with rough or

dirty bottoms can the cooktop surface.mark or scratch

Consistent and proper cleaning is essential to

maintaining your ceramic glass cooktop.

IMPORTANT

For light to moderate soil:

Apply a few drops of glass-ceramic cooktop cleaner directly

to the cooktop. Use a paper towel or use a non-abrasive

plastic type no-scratch cleaning pad to clean the entire

cooktop surface. Make sure the cooktop is cleaned

thoroughly, leaving no residue.

For heavy, burned on soil:

Apply a few drops of glass-ceramic cooktop cleaner

directly to the soiled area. Rub the soiled area using a

non-abrasive plastic type no-scratch cleaning pad, applying

pressure as needed. Do not re-use the pad used to clean

the cooktop for any other purpose.

If soils remain, carefully scrape soils with a metal razor

blade scraper, holding scraper at a 30 degree angle to

the surface. Remove loosened soils with cooktop cleaning

cream and buff surface clean.

Before cleaning the cooktop, be sure the controls are

turned to OFF and the cooktop is COOL.

CAUTION

CARE & CLEANING

Ceramic glass cooktop cleaning (cont’d)

(some models)

Plastic or foods with a high sugar content:

These types of soils need be removed immediately if

spilled or melted onto the ceramic cooktop surface.

Permanent damage (such as pitting of the cooktop

surface) may occur if not removed . immediately

After turning the surface elements OFF, use a razor blade

scraper or a metal spatula with a mitt and scrape the soil

from the hot surface (as illustrated). Allow the cooktop to

cool, and use the same method for heavy or burned on

soils.

Do not use the following on the ceramic cooktop:

• Do not use abrasive cleaners and scouring pads, such

as metal and some nylon pads. They may scratch the

cooktop, making it more difcult to clean.

• Do not use harsh cleaners, such as chlorine bleach,

ammonia or oven cleaners, as they may etch or discolor

the cooktop.

• Do not use dirty sponges, cloths or paper towels, as

they can leave soil or lint on the cooktop which can

burn and cause discoloration.

DO NOT use a cooktop cleaner on a hot cooktop.

The fumes can be hazardous to your health and

can chemically damage the ceramic glass surface.

WARNING

Caution for aluminum use on the cooktop

• Use of aluminum foil on a hot Aluminum Foil -

cooktop will damage the ceramic cooktop. Do not use

thin aluminum cooking utensils or allow aluminum foil to

touch the ceramic cooktop under ANY circumstances.

• The melting point of aluminum Aluminum utensils -

is much lower than that of other metals. Care must be

taken when aluminum pots or pans are used on the

cooktop. If aluminum pans are allowed to boil dry when

using the cooktop, the utensil may be damaged or

destroyed and it may fuse to, break or mark the ceramic

glass surface, permanently damaging the cooktop

surface.

Damage to the ceramic glass cooktop may occur if you

use an abrasive type cleaning pad. Only use cleaning

products that have been specically designed for

ceramic glass cooktops.

IMPORTANT

CARE & CLEANING

For models that have a visible lower bake element

ONLY - This bake element was designed to be tilted up

using your hand from the front of the bake element for

cleaning purposes. Remove the bottom oven rack before

raising the element. Do not to raise the element more

than 4 or 5 inches from the resting position.

The oven door is heavy. For safe, temporary storage, lay the

oven door at with the inside of the door facing down.

Removing and replacing the lift-off oven door

CAUTION

To remove oven door

1. Open oven door completely (horizontal with oor-Fig. 1).

2. Remove 2 screws located on the inside of the oven

door liner (See Fig. 2).A

3. Insert the 2 screws into the door hinge holes located on

the side of the hinge arm, one into each hinge (See B

Fig. 2).

4. Close oven door until the door stops, (do not force

the door to close any further). The placement of these

screws should keep door open in about a 45 degree

position.

5. Grasp oven door rmly on both sides and slide door up

and off hinges at the same angle (See Fig. 3).

6. To clean oven door, follow the instructions provided

listed in the cleaning chart under “oven door”.

To replace oven door

1. Be sure the hinge arms remain at the 45 degree angle

position. Be sure the screws are still locking the hinge

arms from moving. If the screws fall out of the hinge

holes, the hinge(s) may snap back against the oven

frame and could pinch ngers or chip the porcelain

nish on the oven front frame.

2. Hold door at the sides near the top while resting the

lower front of door on your knee. Insert the door

channels at the bottom of door over the door hinges,

(See Fig. 3).

3. Allow the door to slide down into the door hinges

evenly at the same 45 degree angle. The hinge arms

should be inserted into the bottom corners as far as

they can go.

4. Open door completely (horizontal with oor) and

remove both screws from holes in door hinges.

5. Reinstall the 2 screws into the door liner (See Fig. 2).C

6. If the door is not in alignment with the oven frame,

remove door and repeat the above steps.

Special door care instructions - Most oven doors

contain glass that can break.

• Do not close the oven door until all the oven racks are

fully in place.

• Do not hit the glass with pots, pans, or any other object.

• Scratching, hitting, jarring or stressing the glass may

weaken its structure causing an increased risk of

breakage at a later time.

Fig. 1

Fig. 2

Oven door hinge

locations

with oven door

fully open.

Fig. 3

Cleaning under lower element (some models)

CAUTION

The oven bake and broil elements may appear to have

cooled after they have been turned OFF. The elements

may still be hot and burns may occur if these elements

are touched before they have cooled sufciently.

Termékspecifikációk

Márka:	Kelvinator
Kategória:	nincs kategorizálva
Modell:	MFF3015RW

Szüksége van segítségre?

Ha segítségre van szüksége Kelvinator MFF3015RW, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók nincs kategorizálva Kelvinator

Kelvinator MFF3015RW Útmutató

28 Augusztus 2024

Kelvinator MFF3026RS Útmutató

28 Augusztus 2024

Kelvinator MFF3016RW Útmutató

28 Augusztus 2024

Kelvinator MFF3036RB Útmutató

28 Augusztus 2024

Kelvinator MFF3036RS Útmutató

28 Augusztus 2024

Kelvinator MFF3025RW Útmutató

28 Augusztus 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA SR-P Útmutató

10 Április 2025

Soundstream VRN-64HBL Útmutató

10 Április 2025

Panasonic Lumix DMW-AC11 Útmutató

10 Április 2025

Planet PWR-240-48 Útmutató

9 Április 2025

CaterChef 445001 Útmutató

9 Április 2025

IFM E40581 Útmutató

9 Április 2025

Livn Bolt Útmutató

9 Április 2025

Livn Beats Útmutató

9 Április 2025

Alpine DP2-40C-BC Útmutató

9 Április 2025

IFM O3R252 Útmutató

9 Április 2025