Használati útmutató Jung ME5201DTU

Jung kapcsoló ME5201DTU

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Jung ME5201DTU (17 oldal) a kapcsoló kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/17

Licht Management Universal timer switch display

Ref.-no.: ..5201 DTU..

Operating instructions

Universal timer switch display

1. Function

The Time Switch display is a system component and is installed in a box

as per DIN 49073 (deep box recommended) in conjunction with the Time

Switch insert. The unit facilitates the programmed, time-controlled

switching of various lamps (refer to Specifications) up to a maximum of

1000 W.

Product features:

 Simple operation through a four-key field.

 Two independent program memories for a total of up to 18 switching

time events (e. g. nine ON and nine OFF time events).

 Factory-programmed switching times in two program memories A B.,

 Timer function C ( automatic shut-off after a preset time).

 Random function.

 Astro function.

 Summer/winter time change-over by key operation.

 Individual astro function by astro time shift.

 Actuation via extensions (insert) possible.

 Reset to facilitate to select factory default setting.

 Power reserve: Programs permanently saved. Current data (time,

month, date, day) stored up to 24 hours (maintenance-free and

without backup batteries).

Stand: Aug-07 325 048 03

Licht Management Universal timer switch display

Ref.-no.: ..5201 DTU..

2. Programming

Note: If no operation is made for longer than 2 minutes during

programming, the Time Switch will automaticliy return to displaying the

current data. Programming can be cancelled any time by pressing the key

SET for about 3 seconds.

2.1. Setting Current Data

Prior to entering your data please make a reset to bring back the device to

factory default setting:

Depress the MODE and SET keys at the same time until all display

segments light up for a short time (approx. 7 sec.). This completes the

reset.

To put the Time Switch into operation, please enter the current data:

Hold the SET key depressed until the display reads prog.

Licht Management Universal timer switch display

Ref.-no.: ..5201 DTU..

Use key ON or OFF to select the following settings (please refer to the

diagramm):

Time, Date • : Set current data

A : Programming memory A

B : Programming memory B

Astro • :Shift astro times

Accept the Time, Date symbol by shortly depressing the SET key. The

Time Switch is now in the current data setting mode.

cc Setting summer/ winter time

The currently selected function is blinking. Use key ON or OFF to set

summer time S or winter time W.