Használati útmutató Jung 521KIZNAUF

Jung Elektromos aljzat 521KIZNAUF

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Jung 521KIZNAUF (4 oldal) a Elektromos aljzat kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/4
SCHUKO socket with surge voltage protection
SCHUKO socket with surge voltage protection
Art. No. : ..521 KINAUF..
SCHUKO socket with surge voltage protection
Art. No. : 821 UF W
Operating instructions
1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
To protect against high-energy surges, install multistage selective protection. Otherwise
connected devices may be damaged.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1: Device components
(1) Socket outlet
(2) Red light emitting diode = protection function not in operation
(3) Red light emitting diode = mains voltage present
3 Function
Intended use
- Type 3 fine protection for protecting electrical and electronic devices against transient
power surges according to EN 61643-11
- For use only in combination with Type 1 coarse protection and Type 2 medium protection
- For use in TN, TT and IT systems
- Stationary installation indoors in appliance box according to DIN 49073.
Product characteristics
- The device protects electrical and electronic devices against transient power surges.
- Failure of the protection function is indicated by an acoustic and visual signal.
1/4
32515853
J0082515853 05.01.2016
Instructions for operation
- Keep cables between loads (5) and surge protection socket outlet (1) as short as possible,
max. 4 m.
- Do not lay protected cables parallel to unprotected cables. There is a danger of surge
voltage coupling.
- When performing insulation measurements on the system, all surge protection products
should always be disconnected, because otherwise the test voltage will be limited by the
protective modules, thus leading to incorrect measurements.
4 Information for electrically skilled persons
4.1 Fitting and electrical connection
DANGER!
Electrical shock when live parts are touched.
Electrical shocks can be fatal.
Before carrying out work on the device or load, disengage all the
corresponding circuit breakers. Cover up live parts in the working environment.
Connecting and fitting the device
Figure 2: Connection diagram for single socket outlet
2/4
32515853
J0082515853 05.01.2016
SCHUKO socket with surge voltage protection
Figure 3: Connection diagram for socket outlet combination
(1) Surge protection socket outlet
(4) Socket outlet with normal design
(5) Load
oConnect surge protection socket outlet according to connection diagram for single socket
outlet (figure 2) or connection diagram for socket outlet combination (figure 3).
iThe maximum continuous voltage (see Technical data) must not be exceeded. In multiple
combinations, when a surge protection socket outlet is used the other socket outlets used
in the combination are also protected in the normal design. For this the socket outlets have
to be installed on the same conductor.
oInstall overvoltage protection socket outlet in appliance box.
oMount the cover and frame. Observe correct installation position. Otherwise the LED will
not function.
5 Appendix
5.1 Technical data
Surge protection Type 3 arrester (one port)
Rated voltage AC 230V ~ (±10%)
Mains frequency 50 / 60Hz
Maximum continuous voltage AC 255V~ (UC)
No-load voltage 4kV (UOC)
Rated load current 16A (IL)
Short circuit strength 1.5kA (ISCCR)
Protection level
L/N ≤ 1.25kV (FM)
L/PE;N/PE ≤ 1.25 kV (FM)
TOV characteristic 442 V/5 s/120 min (UT)
Circuit breaker max. 16A (gG/C)
Ambient temperature -5 ... +40°C
Relative humidity 5 ... 95% (No moisture condensation)
Connection
single stranded 1.5 ... 2.5mm²
This device can protect connected loads only up to the protection level specified in the technical
data. Surge voltages that are higher than that may still damage the connected devices. The
same applies for devices that require a lower protection level. For this reason we accept no
liability for any damage to the connected loads.
3/4
32515853
J0082515853 05.01.2016
SCHUKO socket with surge voltage protection

Termékspecifikációk

Márka: Jung
Kategória: Elektromos aljzat
Modell: 521KIZNAUF

Szüksége van segítségre?

Ha segítségre van szüksége Jung 521KIZNAUF, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Elektromos aljzat Jung

Jung

Jung 521KIZNAUF Útmutató

2 Szeptember 2024

Útmutatók Elektromos aljzat

Legújabb útmutatók Elektromos aljzat

Panduit

Panduit CFPL4SY Útmutató

12 Január 2025
V-TAC

V-TAC VT-5001 Útmutató

11 Január 2025
Asus

Asus ROG Crosshair VIII Extreme Útmutató

11 Január 2025
Ikea

Ikea INSPELNING 005.698.36 Útmutató

4 Január 2025
Extron

Extron WPC 220 A EU Útmutató

4 Január 2025
Asrock

Asrock Z890 Pro RS Útmutató

3 Január 2025
Lanberg

Lanberg SM01-WPS34 Útmutató

3 Január 2025
Lanberg

Lanberg PDU-10I-0200-IEC-BK Útmutató

3 Január 2025
Lanberg

Lanberg PDU-08I-0200-C20-BK Útmutató

3 Január 2025
Lanberg

Lanberg PDU-03F-0200-IEC-BK Útmutató

3 Január 2025