Használati útmutató JL Audio SlamPak SLPK-YA-VXWR-SG-WH

JL Audio nincs kategorizálva SlamPak SLPK-YA-VXWR-SG-WH

Olvassa el alább 📖 a magyar nyelvű használati útmutatót JL Audio SlamPak SLPK-YA-VXWR-SG-WH (9 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/9
INSTALLATION
DIFFICULT Y:
EST IMATED TIME:
3-4 HOURS
Continued on Next Page
45
OUT
OF
SLPK-YA-VXWR-SG INSTR_SKU# 011494
I N S T A L L A T I O N G U I D E
for the
SLPK-YA-VXWR-SG-TB
SKU# 94652
&
SLPK-YA-VXWR-SG-WH
SKU# 94653
2015-2019 Yamaha VX
SlamPakThank you for choosing a JL Audio SlamPak™ for your marine sound system.
With proper installation, your new marine audio sound system
will deliver years of listening pleasure.
We strongly recommend that you have your new SlamPak™ installed by your
authorized JL Audio dealer. The installation professionals employed by your
dealer have the necessary tools and experience to disassemble and reassemble
your vessel properly. If you prefer to perform your own installation, please read
this installation guide completely before beginning the process.
If you choose to perform the installation yourself, it is absolutely
vital that the SlamPak™ be properly mounted to the vessel
according to these instructions.
Failure to mount the enclosures presents a serious safety hazard in
the event of a collision, rollover, or sudden deceleration.
IN CL U DE D HAR DWAR E
Continued on Next Page
Page 2 • JL Audio, Inc., 2020
SLPK-YA-VXWR-SG INSTR_SKU# 011494
Qty Description
1 Amp Bracket
1Starboard Adaptor
1 Port Adaptor
2 Mounting Insert
1 Template
4 8 - 32 x 1/4” Phillips Pan Head Screw
31/4 - 20 x 1Serrated Flange Bolt
3 1/4” Oversized Flat Washer
5 1/4 - 20 Nylon Locknut
2 1/4 - 20 x 1” Hex Head Bolt
4 1/4” Flat Washer
12 M6 - 1mm x 10mm Phillips Flat Head Screw
2 7/16 - 14 x 1-1/4” Hex Head Bolt
2 7/16” Flat Washer
2 7/16” Split Lock Washer
22-Pin Female Receptacle
2 2-Pin Wedgelock
1 4-Pin Female Receptacle
1 4-Pin Wedgelock
2 Rubber Grommet
10 Cable Tie
4 Heat Shrink Tubing
Hardware Equipment
Qty Description
1 MX280/4 Amplier *
2VeX Speaker Enclosures
1 MBT-CRXv2 Bluetooth Controller
1 Power Harness
1 Amplier Harness
1 1.5’ Two-Channel RCA Interconnect
1 40A Circuit Breaker
1 Sport Grille Badges (pair)
2 Rear Logo Appliqué
* NOTE: For optimum performance and reliability, all amplifier controls
have been preset for this SlamPak™ and sealed beneath the control
panel cover. No further adjustment is necessary.
Page 3 • JL Audio, Inc., 2020 Continued on Next Page
S T E P 8
Remove the body panel from the vessel.
S T E P 7
Lift the lid. Remove the indicated bolt and the
nut from the underside.
S T E P 6
Remove the indicated screw.
S T E P 5
Carefully unclip and remove the screw cover
panel.
S T E P 4
Remove the accent panel from the vessel.
S T E P 3
Remove the two indicated screws from the
accent panel on the starboard side.
S T E P 2
Remove the front seat section from the vessel.
S T E P 1
Unlatch and remove the rear seat section from
the vessel.
SLPK-YA-VXWR-SG INSTR_SKU# 011494

Termékspecifikációk

Márka: JL Audio
Kategória: nincs kategorizálva
Modell: SlamPak SLPK-YA-VXWR-SG-WH

Szüksége van segítségre?

Ha segítségre van szüksége JL Audio SlamPak SLPK-YA-VXWR-SG-WH, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva JL Audio

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva