Használati útmutató JBL SB300

JBL hangszóró SB300

Olvassa el alább 📖 a magyar nyelvű használati útmutatót JBL SB300 (8 oldal) a hangszóró kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/8
1X
1X
Included Items
thank You For choosIng thIs
JBl ® Product
The SB300 is a two-piece home theater speaker system that
includes a powered stereo soundlbar speaker, a wireless 8-inch
(200mm), 100-watt powered subwoofer and all of the cables you
need to connect the soundbar to your TV and your cable/satellite
tuner or DVD player. Both components feature the dynamic new
JBL Weave design for a distinctive, one-of-a-kind look.
We’re confident that this JBL system will provide every note
of enjoyment that you expect – and that when you think about
purchasing additional audio equipment for your home, car or
office, you will once again choose JBL products.
This quick-start guide contains all the information you need to set
up, connect and adjust your new speaker system. For more in-
depth information, go to our Web site: www.jbl.com.
sB300
powered soundbar with powered subwoofer
quick-start guide
1X
1X
On/O ff
Stereo
Aux
Input
Vol.+
Vol.–
Mute
Surround
Digital
Input
2X
2X
2
SOUNDBAR TOP-PANEL CONTROLS AND
REMOTE CONTROL
Power Button: To turn the system on when the soundbar is in the
Standby mode, press the Power button on either the soundbar or
the remote. (The Power indicator will turn blue.) To put the system
in the Standby mode, press either Power button while the system is
on. (The Power indicator will turn amber.) The subwoofer will remain
on for approximately one minute after the soundbar goes into the
Standby mode. If you do not press the Power button, the soundbar
and the subwoofer will both automatically go into the Standby mode
approximately 15 minutes after the audio signal ceases.
NOTE: If you put the soundbar into the Standby mode by pressing
the Power button, you must manually turn it on by pressing the Power
button again. If the system automatically goes into the Standby
mode 15 minutes after the audio signal ceases, it will automatically
turn on whenever the soundbar detects an audio signal at the input
connection that was last used.
Mute Button (remote control only): Press the Mute button to
mute the SB300 system. (The Power indicator flashes blue.) While
the system is muted, press the Mute button again or the Volume Up
button to restore the sound.
NOTE: Momentarily pressing the soundbar’s Power button while the
system is on will mute the system. Momentarily pressing the button
while the system is muted will restore the volume.
Power
Button
Surround-
Mode Button
Volume Up/
Down Buttons
Source Selector
Button
Power
Indicator
Surround-Mode
Indicator
Source
Indicator
Surround Mode Button: This button turns the SB300 system’s
3-D Surround processing on and off. The Surround Mode indicator
turns blue when 3-D Surround is active, and turns white when 3-D
Surround is not active (normal stereo sound). See
Surround Mode
Buttons
, on page 6, for more information. NOTE: The remote control
has individual buttons for the Stereo and 3-D Surround modes.
Volume Up/Down Buttons: Press the “+” button to increase the
volume; press the “–” button to decrease the volume.
Source Selector Button: This button switches between the sources
connected to the Source 1 (analog) and Source 2 (digital) inputs.
When Source 1 is active, the Source indicator turns white; when
Source 2 is active, the Source indicator turns blue.
NOTE: The remote control has an individual button for each input
source.
On/Off
Stereo
Aux
Input
Vol.+
Vol.–
Mute
Surround
Digital
Input
Power
Button
Volume Up/Down
Buttons
Source Selector
Buttons
Mute
Buttons
Surround-Mode
Buttons
soundBar rear-Panel controls and
connectIons
Wireless Pairing Switch: Press this switch to initiate wireless pairing
between the soundbar and the wireless subwoofer. See
Pairing the
Units for Wireless Operation
, on page 6, for more information.
EQ Switch: Use this switch to adjust the soundbar’s bass for either
wall or table mounting. If you’re mounting the soundbar on a wall with
the included wall-mount brackets, set the EQ switch to the “Wall”
position for the most natural-sounding bass performance. If you are
placing the soundbar on a table, set the EQ switch to the “Table”
position for the most natural-sounding bass performance.
Aux Input Connection (analog): Use the included stereo audio
cable to connect the stereo analog outputs of your TV, DVD player or
cable/satellite tuner here.
Optical Connection (digital): If your TV, DVD player or cable/satellite
tuner has an optical digital output, connect it here.
NOTE: You can connect different source components to the analog
and digital connections.
Power Cord Connector: Connect the included power cord here. See
Power Connections
, on page 5, for more information.
IMPORTANT: Do not connect the power cord to an AC outlet until you
have made and verified all other connections.
Power Switch: Set this switch to the “On” position to activate the
soundbar. In normal operation, this switch will be left in the “On”
position. See
Turning the Soundbar On and Off
, on page 6, for more
information.
If you will not be using the soundbar for an extended period – for
instance, if you’re going on vacation – set the Power switch to the
“Off” position.
Wireless
Pairing Switch
Analog (AUX) Input
Connections
Power
Switch
EQ Switch Optical Digital Input Connector Power Cord Connector
3
www.jbl.com
English
Status LED: Indicates the subwoofer’s operational status:
Lights blue continuously when the subwoofer is on and linked to •
the soundbar.
Slowly flashes blue when the subwoofer is on and the wireless link •
is not established between the subwoofer and the soundbar.
Rapidly flashes blue during the wireless pairing process.•
Lights amber continuously when the subwoofer is in the Standby •
mode.
Turns off when the subwoofer’s Power switch is in the “Off” •
position.
Level Control: Use this control to balance the subwoofer’s volume
with that of the soundbar. Turn the knob clockwise to increase
the subwoofer’s volume; turn it counterclockwise to decrease the
subwoofer’s volume.
Cutoff Control: This knob adjusts the subwoofer’s cutoff between
40Hz and 200Hz.The higher you set the Cutoff control, the higher
in frequency the subwoofer will operate and the more its bass will
“overlap” that of the soundbar. This adjustment helps achieve a
smooth transition of bass frequencies between the subwoofer and the
soundbar for a variety of different rooms and subwoofer locations. See
Subwoofer Cutoff Control
, on page 7, for more information.
Phase Switch: This switch determines whether the subwoofer driver’s
piston-like action moves in and out in phase with the speakers in
the soundbar. If the subwoofer were to play out of phase with the
soundbar speakers, some of the sound waves produced by the
subwoofer or soundbar could be canceled, reducing bass performance
and sonic impact. This phenomenon depends in part on the relative
placement of the speakers in the room. See
Subwoofer Phase Switch
,
on page 7, for more information.
Wireless Pairing Switch: Press this switch to initiate wireless pairing
between the subwoofer and the soundbar. See
Pairing the Units for
Wireless Operation
, on page 6, for more information.
Power Switch: Set this switch to the “On” position to activate the
subwoofer. In normal operation, this switch will be left in the “On”
position. See
Turning the Subwoofer On and Off
, on page 6, for more
information.
If you will not be using the subwoofer for an extended period – for
instance, if you’re going on vacation – set the Power switch to the
“Off” position.
Power Cord Connector: Connect the included power cord here and
into an active, unswitched AC outlet. See
Power Connections
, on page
5, for more information.
IMPORTANT: Do not connect the power cord to an AC outlet until you
have made and verified all other connections.
suBWooFer rear-Panel controls
Power
Switch
Power Cord
Connector
Wireless
Pairing Switch
Level
Control
Status
LED
Cutoff
Control
Phase
Switch

Termékspecifikációk

Márka: JBL
Kategória: hangszóró
Modell: SB300

Szüksége van segítségre?

Ha segítségre van szüksége JBL SB300, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók hangszóró JBL

JBL

JBL Control 426LP Útmutató

9 Április 2025
JBL

JBL Conceal C83 Útmutató

8 Április 2025
JBL

JBL sCl-4 Útmutató

29 Március 2025
JBL

JBL B-6ICDT Útmutató

12 Január 2025
JBL

JBL B-8IC Útmutató

12 Január 2025
JBL

JBL 4349 Útmutató

12 Január 2025
JBL

JBL Tower X Marine MT10HLW Útmutató

6 Január 2025
JBL

JBL Control CM42AW Útmutató

1 Január 2025
JBL

JBL Performance P36AW Útmutató

1 Január 2025
JBL

JBL Balboa 30 Útmutató

1 Január 2025

Útmutatók hangszóró

Legújabb útmutatók hangszóró

Crestron

Crestron SAROS IC8T Útmutató

8 Április 2025
LD Systems

LD Systems STINGER G3 TMB Útmutató

8 Április 2025
Crestron

Crestron SAROS ICE4T Útmutató

7 Április 2025
Crestron

Crestron SAROS ICI6T Útmutató

7 Április 2025
Focal

Focal K2 Power M FRAK Útmutató

5 Április 2025
Match

Match UP C42BMW-FRT.3 Útmutató

3 Április 2025
Turbosound

Turbosound PQ12-SB Útmutató

3 Április 2025
Trust

Trust Tytan GXT 658 Útmutató

3 Április 2025
Turbosound

Turbosound PQ15-YB Útmutató

3 Április 2025
Klipsch

Klipsch Synergy KSB-S1 Útmutató

3 Április 2025