Használati útmutató Jablotron JA-60V
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Jablotron JA-60V (2 oldal) a Biztonság kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/2
JA-60V Wireless outdoor PIR detector 1 MEB 52101
JA-60V Wireless outdoor P.I.R. motion detector
The JA-60V is an outdoor intruder detector designed to detect human
body movement in a protected area. Used PIR detector produced by Optex
has two double-layered detection patterns (upper and lower) both have to
be activated to trigger the alarm. This reduces false alarms, particularly
those caused by temperature changes, light reflection or small animals.
A tamper triggers an alarm if there is any attempt to tamper with the
detector.
The built-in transmitter is fully compatible with all JA-6X control panels.
Specifications
Power 3 V - 2 x AAA battery 1.5V
Battery life time about 1 year
Working frequency 433.92 MHz
RF Power
<
10 mV
Working range max. 100 m (open area)
Specification of the Optex VX 402R detector
Detection method Passive infrared
Coverage 12 m / 90° ; 14 segments
Mounting height 0.8 – 1.2 m
Detection speed 0.3 – 1.5 ms-1
Battery saving timer 5 or 120 seconds
LED indicator only in the test mode
Environmental class IV (EN 50131-1)
Operating temperature -20°C to +50°C
Waterproof IP54
Humidity 95%
Dimension 198 x 80 x 108 mm
Security grade 2 (EN 50131-1)
Can be operated according to ERC/REC 70-03
Hereby, Jablotron Ltd., declares that this JA-60V is in
compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
Original of the conformity assessment can be found at the web page
www.jablotron.cz, section Technical support.
Contents of the set: detector JA-60V, pole mounting kit, screw kit, area
masking plates, 2 AAA batteries
Installation
Select the proper place for mounting the detector according to
following:
1. Install the detector perpendicular to the ground to make upper
detection area parallel to the ground
2. Installation height is 0.8 – 1.2 m
3. Mount the detector so that a majority of traffic flow is across the
detection pattern
4. Too much light such as strong sunlight directed exactly to the sensor
may cause unstable condition. It is highly recommended to avoid
such installation.
3.1.1. 3.
0.8
1.2 m
To open the detector:
1. Unscrew the lock screw and remove the top cover.
2. Unscrew the screws fastening the back box. Remove the back
box.
NOTE: never touch surface of the PIR sensor.
Fix the detector to desired place. Detector can be fixed directly on the
wall or by using supplied fix bracket on the pole (Ø 43 – 48 mm).
Optical Part
Cover
Lock Screw
Back Box
Pole Mounting
Bracket
Setting Switches
Enrollment of the detector to the receiver
The transmitter is placed below the optical part of the detector. Study
the installation manual of the receiver unit (control panel) first to learn how
enter the enrolling mode. When the receiver is switched to the enrolment
mode insert the two provided AAA batteries into the detector (polarity is
marked in the detector). The detector will generate an enrollment signal
after the batteries are installed.
INSTANT
DELAY
JA-60N transmitter
• Use DIP switch no. 1 to select the reaction of the system:
- instant (position ON)
- delay (position 1).
• Leave DIP switch no. 2 in position ON.
Adjustment
The upper detection area stays parallel to the ground. The lower area
moves as shown below depending on the position of the setting switch.
Detection length is therefore limited by the length of lower detection
area, since both upper and lower detection area have to be activated
at the same time to trigger the detector.
A
distance 0 - 12 m
D
distance 0 - 2 m
C
distance 0 - 5 m
B
distance 0 - 8 m
JA-60V Wireless outdoor PIR detector 2 MEB 52101
Detection length setting table:
Max. detection length
Position Standard See Note bellow
A 12 m 10.0 to 15.0 m
B 8 m 6.0 to 10.0 m
C 5 m 4.0 to 5.5 m
D 2 m 1.5 to 2.5m
NOTE: the maximum detection length may vary as above due to
environmental thermal condition.
Detection Area
Level A,B,C,D
No Detection
Tolerance
Active area angle is 90°. By holding the pyro-electric unit it can be turned
in to desired direction ( in 15° steps).
45 90
45
Area masking – by provided masking plates section of the detection area,
which is exposed to the reflection of the sunlight, car light etc. can be
masked.
Sensitivity of the PIR sensor can be set by “SENS” switch in three
steps:
L - low
M - middle
H - high
Other parameters can be set using a DIP switch:
LED indicator OFF LED indicator ON
120 s 5 s Battery saving timer
4x 2x Pulse count
LED indicator is to be used for testing of the PIR detector. During
normal operation period is recommended to switch it off to save the
battery.
Depending on the 120s/5s battery saving timer DIP switch the movement
sensor will be blocked for a period of 5 or 120 seconds after a movement is
detected to conserves battery energy.
Depending on the Pulse count DIP switch the detector (both upper &
lower detection area) must be triggered 2 or 4 times to transmit the
alarm signal.
Operation test
Turn the LED indicator on, set the “battery saving timer” to 5 seconds
and close the detector. Every 5 seconds any movement in the
detection area will be indicated by the LED indicator and the alarm
information will be sent to the control panel.
Operation
To increase batteries lifetime it is highly recommended to switch the
“battery saving timer” to 120 seconds and switch off the LED indicator
in normal operating mode. The movement sensor will be blocked for 5 or
120 seconds after a movement is detected. This means that if there is
constant movement in the detection area the detector will transmit
information about the movement only once every 5 or 120 seconds.
Battery testing and replacement
The detector automatically checks the condition of its batteries. If it is
necessary to replace the batteries, the detector will inform the control panel
about it. If a low battery is indicated the detector works as normal but,
batteries should be replaced as soon as possible (within a week).
Before replacing the batteries, the control panel must be switched into
mode, which allows detectors opening (User mode or Programming
mode).
Use only high quality alkaline AAA batteries for replacement.
Note: Dispose of batteries safely depending on the type of the batteries and
local regulation. Although this product does not contain any harmful materials
we suggest you to return the product to the dealer or directly to the producer
after usage.
Troubleshooting
Problem Probable cause Remedy
Lower detection area is
unnecessarily long Set the detection area
properly
Detector receives
reflection of the reflector,
sunlight, car light etc.
Remove the reflector,
mask the area exposed to
the reflection of light or
change position of the
detector
There is a heat source in
the area that can cause
fast temperature change
(stove, heater etc.)
Remove the source of
heat or change position of
the detector
Detector
makes false
alarms
There is any moving object
in the area (laundry on the
clothesline, plans etc.)
Remove the moving object
or change position of the
detector
Detection area is not set
properly Set the detection are
properly
Occasionally
no detection Sensitivity is set to low (L) Change sensitivity to
medium (M) or high (H)
Low battery Replace the battery
LED does not light Turn LED switch ON
Detector
fails to work LED indicator lights but no
reaction on the control
panel
The control panel is out of
range, check the battery,
try to replace detector or
control panel
80
198
108
Dimensions
Note: Although this product does not contain any harmful
materials we suggest you to return the product to the dealer
or directly to the producer after usage.
Internet: www.jablotron.cz
Tel.: 483 559 999
fax: 483 559 993
Pod Skalkou 3 3
466 01 Jablonec nad Nisou
123
Termékspecifikációk
| Márka: | Jablotron |
| Kategória: | Biztonság |
| Modell: | JA-60V |
Szüksége van segítségre?
Ha segítségre van szüksége Jablotron JA-60V, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Biztonság Jablotron
20 Augusztus 2024
20 Augusztus 2024
19 Augusztus 2024
19 Augusztus 2024
19 Augusztus 2024
19 Augusztus 2024
19 Augusztus 2024
17 Augusztus 2024
15 Augusztus 2024
15 Augusztus 2024
Útmutatók Biztonság
- Biztonság Nedis
- Biztonság Grundig
- Biztonság Bosch
- Biztonság Theben
- Biztonság Panasonic
- Biztonság Siemens
- Biztonság Geemarc
- Biztonság TRENDnet
- Biztonság EZVIZ
- Biztonság Technaxx
- Biztonság Eden
- Biztonság Hikvision
- Biztonság Netgear
- Biztonság Lamax
- Biztonság V-TAC
- Biztonság Doro
- Biztonság First Alert
- Biztonság Devolo
- Biztonság Powerfix
- Biztonság BaseTech
- Biztonság Bavaria
- Biztonság Eufy
- Biztonság Foscam
- Biztonság Honeywell
- Biztonság Velleman
- Biztonság Grandstream
- Biztonság Monacor
- Biztonság Blaupunkt
- Biztonság Easy Home
- Biztonság Elro
- Biztonság Abus
- Biztonság Trust
- Biztonság Marmitek
- Biztonság Fenton
- Biztonság Steinel
- Biztonság Trebs
- Biztonság Alphatronics
- Biztonság Provision-ISR
- Biztonság Somfy
- Biztonság Axis
- Biztonság Optex
- Biztonság EasyMaxx
- Biztonság Smartwares
- Biztonság IGET
- Biztonság Kopp
- Biztonság AngelEye
- Biztonság Aritech
- Biztonság AceSee
- Biztonság Alhua - Dahua
- Biztonság Yale
- Biztonság Tevion
- Biztonság Axa
- Biztonság Maginon
- Biztonság Profile
- Biztonság Marquant
- Biztonság Ednet
- Biztonság ME
- Biztonság Goliath
- Biztonság Audiovox
- Biztonság Nest
- Biztonság Grothe
- Biztonság LevelOne
- Biztonság Unitron
- Biztonság Netatmo
- Biztonság Goobay
- Biztonság Switel
- Biztonság Bticino
- Biztonság Secure Pro
- Biztonság Sygonix
- Biztonság Nemef
- Biztonság Dahua
- Biztonság BRK
- Biztonság Hagenuk
- Biztonság Waeco
- Biztonság Logicom
- Biztonság Jupiter Pro
- Biztonság Xavax
- Biztonság Elkron
- Biztonság Orbis
- Biztonság Niko
- Biztonság Gira
- Biztonság Jung
- Biztonság Interlogix
- Biztonság Dnt
- Biztonság Fito
- Biztonság Urmet
- Biztonság Wanscam
- Biztonság Satel
- Biztonság Dymond
- Biztonság Notifier
- Biztonság Friedland
- Biztonság Plustek
- Biztonság Golmar
- Biztonság Batavia
- Biztonság Storage Options
- Biztonság NetworX
- Biztonság Bitron Video
- Biztonság Zmodo
- Biztonság Elro-Flamingo
- Biztonság Electronics Line
- Biztonság One2track
- Biztonság HUMANTECHNIK
- Biztonság Directed Electronics
- Biztonság Oplink
- Biztonság BML
- Biztonság Unitec
- Biztonság Muller
- Biztonság Home8
- Biztonság AVTech - Velleman
- Biztonság Galaxy
- Biztonság Sonic Alert
- Biztonság I-onik
- Biztonság Smartalarm
- Biztonság GE Security
- Biztonság Nor-tec
- Biztonság Entrya
- Biztonság Tegui
- Biztonság Kompernass
- Biztonság Iiquu
- Biztonság Storex
- Biztonság Powermax
- Biztonság Woonveilig
- Biztonság Mikros
- Biztonság Bolyguard
- Biztonság Indexa
- Biztonság Skytronic
- Biztonság Paradox
- Biztonság Flamingo FA15RF
- Biztonság SecuFirst
- Biztonság BRK DICON
- Biztonság FBII
- Biztonság FlinQ
- Biztonság Dericam
- Biztonság Myfox
- Biztonság Kocom
- Biztonság RISCO Group
- Biztonság SmartHome
- Biztonság Bellman
- Biztonság Protector
- Biztonság I-Tel
- Biztonság Home Protector
- Biztonság Ksenia
- Biztonság Mr Safe
- Biztonság Epine
- Biztonság Inner Range
- Biztonság Dedicated Micros
- Biztonság Visonic
- Biztonság PROmax
- Biztonság Y-cam
- Biztonság Selvag
- Biztonság Voxx
- Biztonság Fracarro
- Biztonság Guardall
- Biztonság Xena
- Biztonság Smanos
- Biztonság One Concept
- Biztonság QuattSecure
- Biztonság NetBotz
- Biztonság Securitas
Legújabb útmutatók Biztonság
5 Október 2024
23 Szeptember 2024
23 Szeptember 2024
23 Szeptember 2024
22 Szeptember 2024
20 Szeptember 2024
20 Szeptember 2024
19 Szeptember 2024
17 Szeptember 2024
17 Szeptember 2024