Használati útmutató Hudson Valley Amboy 1548-AGB

Hudson Valley Megkönnyebbülés Amboy 1548-AGB

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hudson Valley Amboy 1548-AGB (2 oldal) a Megkönnyebbülés kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/2
AMBOY
1548
INSTALLATION INSTRUCTIONS
FIXTURE INSTALLATION
1. Attach the CROSSBAR (1) to the junction box using the MOUNTING SCREWS (9). This fixture is designed to
be mounted on standard round or octagon junction box. The junction box must be securely mounted to the
structure of the building.
2. Attach the Ground wire (Green) to the ground inside the junction box (Generally green or bar copper wire) or
the GROUND SCREW (3) on the CROSSBAR (1). NEVER CONNECT GROUND WIRE TO "HOT" WIRE!
FAILURE TO FOLLOW THIS COULD RESULT IN SERIOUS INJURY OR DEATH!
3. Connect the white fixture lead to the neutral (Generally white) wire in the outlet box. Fasten the wires together
with an approved fastener (WIRE NUT) (10). Starting 1" below the fastener, tightly wrap the connection with
electrical tape so that the connections seals the end of the fastener. MAKE SURE THERE ARE NO EXPOSED
WIRE OF STRANDS THAT COULD CAUSE A DANGEROUS SHORT CIRCUIT!
4. Connect the black fixture leads to the hot (Generally black) wire in the junction box. Fasten the joined wires
same as previous step. NEVER REVERSE HOT AND NEUTRAL WIRES. FAILURE TO FOLLOW THIS
COULD RESULT IN SERIOUS INJURY OR DEATH!
5. Attach the FIXTURE ASSEMBLY (4) to the CROSSBAR (1) and fix it by TOP NUTS (6) and secure with FINIAL
(7).
6. Screw the BULB (5) (not included) up into the SOCKET (11) of the fixture.THIS FIXTURE IS RATED FOR 40
WATT BULB LAMP. DO NOT EXCEED THE RECOMMENDED WATTAGE!
7. Restore power to the outlet at the breaker or fuse box.
WARNING/CAUTION
·DISCONNECT POWER BEFORE RE-LAMPING OR WIRING THE FIXTURE. READ ALL INSTRUCTIONS
COMPLETELY BEFORE STARTING INSTALLATION.
·TO AVOID THE RISK OF FIRE OR SHOCK, FIXTURE MUST BE INSTALLED IN COMPLIANCE WITH ALL
APPLICABLE NATIONAL AND LOCAL ELECTRICAL/BUILDING CODES. THE INSTALLATION AND
MAINTENANCE OF THIS UNIT SHOULD BE COMPLETED BY A LICENSED ELECTRICIAN OR CERTIFIED
FACTORY TRAINED TECHNICIAN.
·CALIFORNIA PROP 65: THIS LIGHTING FIXTURE CONTAINS CHEMICALS KNOWN TO THE STATE OF
CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, AND/OR OTHER REPRODUCTIVE HARM. WASH
HANDS AFTER USE.
·REMOVE THE FIXTURE, PARTS AND PARTS BAG(S) FROM THE CARTON. BEFORE DISCARDING THE
CARTON, DOUBLE CHECK TO MAKE CERTAIN THAT ALL PARTS ARE FOUND. INSPECT THE FIXTURE
PRIOR TO INSTALLATION FOR ANY DAMAGE TO THE FIXTURE.
·DIMMING: THE FIXTURE CAN BE CONTROLLED BY A WALL DIMMING DEVICE. ONLY USE
TRIAC/ELECTRONIC DIMMER. MAKE SURE THE CARTON IS MARKED FOR USE WITH LED COMPACT
FLUORESCENT-INCANDESCENT LIGHT SOURCE ONLY. THESE CAN BE PROVIDED BY YOUR LOCAL
ELECTRICAL DISTRIBUTOR, HOME CENTER, OR HARDWARE STORE.
·PLEASE CLEAN WITH A SOFT, DRY CLOTH ONLY! DO NOT USE CLEANSERS
1
3
2
www.hvlgroup.com
Questions? We're here to help!
Contact us at CustomerService@hvlgroup.com
ITEM DESCRIPTION PART NUMBER
1CROSSBAR XBR-001532
2 HOLDING SCREW SCR-001548-H
3 GROUND SCREW SCR-001504-G
4 FIXTURE ASSEMBLY FAS-001548
5 BULB NOT INCLUDED
6 CAP NUTS CAP-001548
7 FINIAL FIN-001504
81/4 NIPPLE NIP-001528
9MOUNTING SCREW SCR-001504-M
10 NUT-001504WIRE NUT
11 E12 SOCKET FAS-001548
4
8
10
7
6
5
9
11
AMBOY
1548
INSTALLATION INSTRUCTIONS
FIXTURE INSTALLATION
1. Attach the CROSSBAR (1) to the junction box using the MOUNTING SCREWS (9). This fixture is designed to
be mounted on standard round or octagon junction box. The junction box must be securely mounted to the
structure of the building.
2. Attach the Ground wire (Green) to the ground inside the junction box (Generally green or bar copper wire) or
the GROUND SCREW (3) on the CROSSBAR (1). NEVER CONNECT GROUND WIRE TO "HOT" WIRE!
FAILURE TO FOLLOW THIS COULD RESULT IN SERIOUS INJURY OR DEATH!
3. Connect the white fixture lead to the neutral (Generally white) wire in the outlet box. Fasten the wires together
with an approved fastener (WIRE NUT) (10). Starting 1" below the fastener, tightly wrap the connection with
electrical tape so that the connections seals the end of the fastener. MAKE SURE THERE ARE NO EXPOSED
WIRE OF STRANDS THAT COULD CAUSE A DANGEROUS SHORT CIRCUIT!
4. Connect the black fixture leads to the hot (Generally black) wire in the junction box. Fasten the joined wires
same as previous step. NEVER REVERSE HOT AND NEUTRAL WIRES. FAILURE TO FOLLOW THIS
COULD RESULT IN SERIOUS INJURY OR DEATH!
5. Attach the FIXTURE ASSEMBLY (4) to the CROSSBAR (1) and fix it by TOP NUTS (6) and secure with FINIAL
(7).
6. Screw the BULB (5) (not included) up into the SOCKET (11) of the fixture.THIS FIXTURE IS RATED FOR 40
WATT BULB LAMP. DO NOT EXCEED THE RECOMMENDED WATTAGE!
7. Restore power to the outlet at the breaker or fuse box.
1
3
2
www.hvlgroup.com
Questions? We're here to help!
Contact us at CustomerService@hvlgroup.com
ITEM DESCRIPTION PART NUMBER
1CROSSBAR XBR-001532
2 HOLDING SCREW SCR-001548-H
3 GROUND SCREW SCR-001504-G
4 FIXTURE ASSEMBLY FAS-001548
5 BULB NOT INCLUDED
6 CAP NUTS CAP-001548
7 FINIAL FIN-001504
81/4 NIPPLE NIP-001528
9MOUNTING SCREW SCR-001504-M
10 NUT-001504WIRE NUT
11 E12 SOCKET FAS-001548
4
8
10
7
6
5
9
11
ATTENTION PRUDENCE
·DÉBRANCHEZ L'ALIMENTATION AVANT DE REMPLIR OU DE CÂBLER LE LUMINAIRE. LISEZ
COMPLÈTEMENT TOUTES LES INSTRUCTIONS AVANT DE COMMENCER L'INSTALLATION
·POUR ÉVITER LE RISQUE D'INCENDIE OU D'ÉLECTROCUTION, LE LUMINAIRE DOIT ÊTRE INSTALLÉ
CONFORMÉMENT À TOUS LES CODES ÉLECTRIQUES/DE CONSTRUCTION NATIONAUX ET LOCAUX
APPLICABLES. L'INSTALLATION ET L'ENTRETIEN DE CET APPAREIL DOIVENT ÊTRE EFFECTUÉS PAR UN
ÉLECTRICIEN AGRÉÉ OU UN TECHNICIEN CERTIFIÉ FORMÉ EN USINE.
·CALIFORNIE PROP 65 : CET APPAREIL D'ÉCLAIRAGE CONTIENT DES PRODUITS CHIMIQUES CONNUS PAR
L'ÉTAT DE CALIFORNIE POUR PROVOQUER LE CANCER, DES MALADIES CONGÉNITALES ET/OU D'AUTRES
DOMMAGES À LA REPRODUCTION. LAVER LES MAINS APRÈS UTILISATION.
·RETIRER LE LUMINAIRE, LES PIÈCES ET LE(S) SAC(S) DE PIÈCES DU CARTON. AVANT DE JETER LE
CARTON, VÉRIFIEZ DOUBLE POUR VOUS ASSURER QUE TOUTES LES PIÈCES SONT TROUVÉES.
INSPECTER LE LUMINAIRE AVANT L'INSTALLATION POUR TOUT DOMMAGE AU LUMINAIRE.
·GRADATION : LE LUMINAIRE PEUT ÊTRE CONTRLÉ PAR UN DISPOSITIF DE GRADATION MURALE. UTILISER
UNIQUEMENT UN GRADATEUR TRIAC/ÉLECTRONIQUE. ASSUREZ-VOUS QUE LE CARTON EST MARQUÉ
POUR UNE UTILISATION AVEC UNE SOURCE DE LUMIÈRE FLUORESCENTE À INCANDESCENTE COMPACTE
UNIQUEMENT. CEUX-CI PEUVENT ÊTRE FOURNIS PAR VOTRE DISTRIBUTEUR ÉLECTRIQUE LOCAL,
CENTRE À DOMICILE OU MAGASIN DE QUINCAILLERIE.
·VEUILLEZ NETTOYER UNIQUEMENT AVEC UN CHIFFON DOUX ET SEC ! N'UTILISEZ PAS DE NETTOYANTS

Termékspecifikációk

Márka: Hudson Valley
Kategória: Megkönnyebbülés
Modell: Amboy 1548-AGB

Szüksége van segítségre?

Ha segítségre van szüksége Hudson Valley Amboy 1548-AGB, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Megkönnyebbülés Hudson Valley

Hudson Valley

Hudson Valley Rye 2314-AGB Útmutató

5 Január 2025
Hudson Valley

Hudson Valley Geneva 712-AGB Útmutató

5 Január 2025
Hudson Valley

Hudson Valley Amboy 1548-AGB Útmutató

5 Január 2025
Hudson Valley

Hudson Valley Greenwich 8301-AGB Útmutató

5 Január 2025
Hudson Valley

Hudson Valley Newport 6513-AGB Útmutató

5 Január 2025
Hudson Valley

Hudson Valley Geneva 709-AGB Útmutató

5 Január 2025
Hudson Valley

Hudson Valley Brookhaven 7215-VGL Útmutató

5 Január 2025
Hudson Valley

Hudson Valley Geneva 715-AGB Útmutató

5 Január 2025
Hudson Valley

Hudson Valley White Plains 5210-AGB Útmutató

5 Január 2025
Hudson Valley

Hudson Valley Avondale 1753-AGB Útmutató

5 Január 2025

Útmutatók Megkönnyebbülés

Legújabb útmutatók Megkönnyebbülés

BeamZ

BeamZ BTSE200 Útmutató

8 Január 2025
BeamZ

BeamZ Cobra Wash100 Útmutató

8 Január 2025
Kogan

Kogan KASMFSTN15A Útmutató

8 Január 2025
BeamZ

BeamZ Cobra Wash120 Útmutató

8 Január 2025
Kogan

Kogan KBE14CWWT1A Útmutató

8 Január 2025
BeamZ

BeamZ IGNITE300A Útmutató

8 Január 2025
Kogan

Kogan KALAMPMS31B Útmutató

8 Január 2025
Sun Joe

Sun Joe 24V-LGT500-LTE Útmutató

7 Január 2025
Infinity

Infinity iM-2515 Útmutató

6 Január 2025
Infinity

Infinity iW-1240 RDM Útmutató

6 Január 2025