Használati útmutató Hotone Ampero Control

Hotone vezérlő Ampero Control

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hotone Ampero Control (12 oldal) a vezérlő kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/12
DES I G N I N S P IRATION
APP USER MANUAL
For Firmware V1.13
For Software V1.0.1
※In the interest of product improvement, the specifications and/or the content of products (including but not limited to appearances, packaging design, manual content, accessories, size, parameters and
display screen), are subject to change without prior notice. Please check with local supplier for exact offers. Specifications and features (including but not limited to appearances, colors and size) may vary by
model owing to environmental factors, and all images are illustrative.
CONNECT
3. Press and hold Footswitch 2+3 on your Ampero Control to enable Bluetooth
Pair Mode. The Bluetooth indicator (on the bottom right corner of the screen on
your unit) will ash to indicate pairing status on.
4. When your Ampero Control appears listed on the startup page the app will  (
automatically scan all nearby devices), select and tap the “Connect To The
Selected Device” button on the screen. The Bluetooth indicator will stay solid
to indicate a successful connection.
888
888
This dot will ash
PC CC
1 2 3 4
BAN K BANK 
Blue tooth MIDI Contro lle r
Hold /Pai r
Press and hold
the footswitch 2+3
1. Turn on the Bluetooth switch on your
mobile device, then turn on your Ampero
Control and launch the app.
2. Login your account (optional).
888
This dot will stay solid 
DEFINITION
BANK
Notes:
1. You can enter ofine mode if no device is found.
2. Ampero Control can only be edited by one device at a time. To use other devices, tap
“Settings“ icon on the lower right corner of the screen, nd “Connection Status“ and enter,
then tap “Disconnect”. Connect another device when nished.
3. The default device name is Ampero Control. You can customize your device name if
needed.
4. If search failed (no device found or timeout), you can retry searching by manually tap
“Search Again” button, or restart Bluetooth on your mobile device.
5. When using Bluetooth connection for editing or MIDI control, please keep your Ampero
Control close to your phones/pads/computers for best possible experience. The
recommended range is less than 5m.
A bank of Ampero Control contains the user data listed below:
ŸBank name and description: Max. 16 characters (including space)
ŸThe footswitch modes of 4 built-in footswitches
ŸMIDI messages (no. of messages, channels, types, values, etc. ) assigned on
each footswitch
ŸCTRL 1/2 controller assign and related settings
Ampero Control features 100 banks (00-99).
TO SETUP A FOOTSWITCH
Follow the instructions :
1. Select a bank and select one footswitch. The image on the right indicates
Bank 0 and footswitch 1 is selected.
2. Select a footswitch mode by tapping mode button:

Termékspecifikációk

Márka: Hotone
Kategória: vezérlő
Modell: Ampero Control

Szüksége van segítségre?

Ha segítségre van szüksége Hotone Ampero Control, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók vezérlő Hotone

Hotone

Hotone Ampero Control Útmutató

8 December 2024
Hotone

Hotone Patch Kommander Útmutató

8 December 2024

Útmutatók vezérlő

Legújabb útmutatók vezérlő

GVM

GVM YK22 Útmutató

11 December 2024
IVT

IVT MPPTplus+ 20A Útmutató

11 December 2024
IVT

IVT SCDplus Útmutató

11 December 2024
Alfatron

Alfatron ALF-IPCON-HDMI Útmutató

10 December 2024
IFM

IFM AC1317 Útmutató

6 December 2024
PCE Instruments

PCE Instruments PCE-RE100P Útmutató

16 Október 2024
PCE Instruments

PCE Instruments PCE-RE21R Útmutató

16 Október 2024
Thrustmaster

Thrustmaster Ferrari GT Experience Útmutató

13 Október 2024
Thrustmaster

Thrustmaster T3PA Add-On Gaming Pedal Set Útmutató

6 Október 2024
Hori

Hori Battle Pad Útmutató

4 Október 2024