Használati útmutató Horstmann HCT2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Horstmann HCT2 (1 oldal) a Termosztát kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/1
HCT2 INSTALLATION / USER
INSTRUCTIONS
Horstmann Controls Limited
Bristol
BS4 1UP
Email: sales@horstmann.co.uk
W ebsite:
WIRING CONNECTIONS
Model HCT2 Cylinder Thermostat
W ith an adjustable temperature range of between 20
oC and 90o
C, the HCT2 Cylinder
thermostat is suitable for mounting on either domestic hot water cylinders or larger diame-
ter heating pipes.
Features
A bimetallic sensor ensures accurate switching and control.
A .strap is included for easy fixing to cylinder
Installation Instructions
The HCT2 should usually be strapped on to the cylinder at a height of about one-third up
from the base - the strap should be tight for good thermal contact. It should be adjusted to
around 60oC. If set too high it may give rise to scalding, and if set too low it will increase
risk of the growth of legionelle bacteria, which could lead to serious heath problems.
Specification
Operating voltage 230v 50/60 Hz
Switching Capacity 16 amps at 230V A C
Contact configuration SPDT
Switching Differential 8oC (approx)
Enclosure protection IP40
Cylinder thermostat Key:
COM = Common supply
CALL = Call for heat or break on
rise SAT = Satisfied on rise

Termékspecifikációk

Márka: Horstmann
Kategória: Termosztát
Modell: HCT2

Szüksége van segítségre?

Ha segítségre van szüksége Horstmann HCT2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Termosztát Horstmann

Horstmann

Horstmann HTT4 Útmutató

15 Szeptember 2024
Horstmann

Horstmann BX2000 Útmutató

17 Július 2024
Horstmann

Horstmann HRT3 Útmutató

17 Július 2024
Horstmann

Horstmann HFT4 Útmutató

17 Július 2024
Horstmann

Horstmann HCT2 Útmutató

17 Július 2024

Útmutatók Termosztát

Legújabb útmutatók Termosztát