Használati útmutató Hori Nintendo Switch

Hori vezérlő Nintendo Switch

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hori Nintendo Switch (1 oldal) a vezérlő kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/1
Thank you for purchasing this product.
Before using this product please read the instructions carefully.
After reading the instruction manual, please keep it for reference.
Instruction manual
Controller： × 1 Instruction manual： × 1
Nintendo Switch / PC(Xinput)
Platform
● Keep this product out of the reach of children under 3.
● Keep this product away from small children.
  Seek medical advice immediately if it is swallowed.
● Please be careful and not allow children to wrap
  the cord around their neck.
● Keep the controller away from dusty or humid areas.
● Do not use this product if damage or alteration occurs.
● Do not get the product wet or leave it where it can get wet.
  It may cause an electric shock or defect.
● Do not leave the product around a heater, audio amp, etc.
  Do not leave it under direct sunlight It may cause a defect.
● Do not touch the metal parts of the USB plug with your
  finger or other metal material. It may cause injury or defect.
● Do not apply strong impact or weight on the product.
● Do not pull roughly or bend the cable of the controller.
● Never disassemble, repair or modify this product.
● If product needs cleaning, use only a soft dry cloth.
  Do not use any chemical agents like benzine or thinner.
● Do not use this product for anything other than its
  intended purpose.
  We are not responsible for any accidents or damages
  in the event of use other than the intended purpose.
Caution
Included
Windows®10 ／8∼8.1 ／7 Supported OS
USB Port, Internet ConnectionSystem requirements
Important
※
This product is not a wireless controller.
※
Please be aware that unexpected action may occur if the Turbo function is used in the HOME Menu.
Connect it to the Nintendo Switch Dock USB port.
※ Do not connect to anything other than a USB port. It may cause a defect.
Please insert the USB connector of the controller into the USB port of
the Nintendo SwitchTM Dock.
Layout
How to connect
TURBO LED USB Connector
ZR Button
Left Stick
{Left Stick Button (Hold) }
Control Pad Capture Button TURBO Button HOME Button
Controller cable
Right Stick
{Right Stick Button (Hold) }
B Button A Button X Button Y Button
-
Button + Button
L Button ZL Button R Button
Nintendo Switch
TURBO LED USB Connector
RB Button
Left Stick
{Left Stick Button (Hold) }
Control Pad There is no function TURBO Button GUIDE Button
Controller cable
Right Stick
{Right Stick Button (Hold) }
B Button A Button X Button Y Button
BACK Button START Button
LT Button LB Button RT Button
PC
Switch button functions between L/R and ZL/ZR buttons.
Press and hold the ZL and ZR buttons simultaneously and connect the USB connector to
the Nintendo Switch Dock USB port.
※
Settings will be saved even after you unplug the controller or turn off the power.
※
To reset the button settings, repeat the "How to switch" process.
※
Turning ON the Nintendo Switch while simultaneously pressing the ZL/ZR buttons with the USB connected will switch the button settings.
How to switch
The Turbo hold function allows continuous rapid ire without having to hold the button.
(Pressing the assigned button deactivates this).
* Control Pad (UP, DOWN, LEFT or RIGHT) are not compatible with the Turbo hold mode,
and can only be set to Turbo mode.
The following buttons can be set to Turbo or Turbo hold mode:
A Button / B Button / X Button / Y Button / L Button / R Button / ZL Button / ZR Button /
Control Pad (UP / DOWN / LEFT / RIGHT)
How to use the Turbo Functions
L/R to ZL/ZR Toggle Function
L Button
ZL Button
R Button
ZR Button
Connect it to the Nintendo Switch Dock USB port.
+
TURBO LED will turn off.
TURBO LED (RED) will turn on.
Main Features
You can adjust the Turbo mode to 3 different speeds.
While pressing the Turbo Button, push up on the Right Analog Stick
to change the Turbo speed in the following order :
5 times/second → 10 times/second → 20 times/second
While pressing the Turbo Button, push down on the Right Analog Stick
to change the Turbo speed in the following order :
20 times/second → 10 times/second → 5 times/second
How to change Turbo Speed
+
+
■ External dimensions (width) 103mm × (depth) 141mm × (height) 69mm :
■ Cable length (Overall length) Approximately 3 m :  ■ Weight : About 230g
■ Rating 45mA : 5V  
 This product is not a wireless controller.
 This product is not equipped with vibration function.
 The image on the packaging may differ from the actual product.
 The manufacturer reserves the right to change the product design or speciications without notice.
 Nintendo Switch logo, Nintendo Switch are trademarks of Nintendo.
 HORI & HORI logo are registered trademarks of HORI.
Please read the Nintendo Switch instructions carefully before you use this product
with the Nintendo Switch console.
Make sure that your Nintendo SwitchTM is updated with the latest system software.
L Button
ZL Button
R Button
ZR Button
+
TURBO Button
+
TURBO Button
Turbo OFF
* The Turbo LED will flash at a rate corresponding to the Turbo speed. The Turbo LED will flash as long as one of the button is in Turbo mode.
* By pressing the HOME Button, all Turbo function and Turbo hold settings will be deactivated.
When restarting game play, you will need to set the Turbo function again.
* Turbo Function may not be compatible with all software titles. Please try adjusting the Turbo settings or simply turn OFF TURBO.
* Turbo function will deactivate when you unplug the USB connector.
Turbo LED StatusSetting method
Turbo Mode
OFF
(All buttons)
Hold down the Turbo button and
then press the button that you
want to set to Turbo mode.
+
TURBO Button
Turbo Hold
Press the button once more,
and the button will remain
inTurbo (Turbo Hold).
Pressing the button again
once more will deactivate
the Turbo function.
Hold the TURBO Button and
press the SELECT Button.
OFF
OFF
Button OFF
TURBO LED will lash.
（Green or Orange）
Button ON
TURBO LED will turn on.
（Green or Orange ）
Button OFF
TURBO LED will turn on.
（Green or Orange）
Button ON
TURBO LED will lash.
（Green or Orange ）
+
TURBO Button
-
Button
In the case that after deactivating the turbo
function, the turbo Indicator LED does not
turn off, this means that there is still a button
set to Turbo/Turbo Hold.
※ LED will turn red while L/R and ZL/ZR button
  functions are switched.
If you forget which buttons you have set to
Turbo mode, deactivate them all and reassign,
as you require.
※ LED will turn red while L/R and ZL/ZR button
  functions are switched.
* Turbo speed is set to 10 times/second by default.
* Right Stick must be returned to the neutral position before changing to the next turbo speed.
* The Turbo LED will lash at a rate corresponding to the Turbo speed for 2 seconds.
Target age : 6 years and over

Termékspecifikációk

Márka: Hori
Kategória: vezérlő
Modell: Nintendo Switch

Szüksége van segítségre?

Ha segítségre van szüksége Hori Nintendo Switch, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók vezérlő Hori

Hori

Hori Battle Pad Útmutató

4 Október 2024
Hori

Hori Fighting Commander OCTA Útmutató

3 Október 2024
Hori

Hori Force Feedback Truck Control System Útmutató

1 Október 2024
Hori

Hori Tactical Assault Commander Útmutató

31 Augusztus 2024
Hori

Hori Tactical Assault Commander Pro V2 Útmutató

4 Augusztus 2024
Hori

Hori Onyx+ Útmutató

1 Augusztus 2024
Hori

Hori Ace Combat 7 HOTAS Útmutató

31 Július 2024
Hori

Hori Split Pad Pro Nintendo Switch Útmutató

26 Július 2024
Hori

Hori pad for Nintendo Switch Útmutató

26 Július 2024
Hori

Hori Nintendo Switch Útmutató

21 Július 2024

Útmutatók vezérlő

Legújabb útmutatók vezérlő

Sonance

Sonance VC60R Útmutató

2 Április 2025
Trust

Trust Mylox GXT 735G Útmutató

30 Március 2025
Trust

Trust Mylox GXT 735 Útmutató

30 Március 2025
American DJ

American DJ STAGE SETTER-8 Útmutató

30 Március 2025
American DJ

American DJ DP-DMX20L Útmutató

30 Március 2025
Visual Productions

Visual Productions TimeCore Útmutató

30 Március 2025
PCE Instruments

PCE Instruments PCE-RE22T Útmutató

28 Március 2025
Metronic

Metronic Zap 3 495383 Útmutató

27 Március 2025
Turtle Beach

Turtle Beach Recon Útmutató

27 Március 2025
DJI

DJI Motion Controller Útmutató

14 Január 2025