Használati útmutató Hoover HVI 740 X

Hoover sütő HVI 740 X

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hoover HVI 740 X (50 oldal) a sütő kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/50
IT
ISTRUZIONI D’USO E INSTALLAZIONE
PIANI INDUZIONE
INSTALLATIONS- UND BEDIENUNGSANLEITUNG
CERANFELDER DE
ES
INSTRUCTIONS FOR USE AND INSTALLATION
INDUCTION HOBS GB
MANUAL DE UTILIZAÇÃO E DE INSTALLAÇÃO
PLACAS DE INDUÇÃO PT
INSTALLATIE- EN GEBRUIKSINDTRUCTIES
INDUCTIEKOOKPLAAT NL
DA
FIN
KÄYTTÖ- JA ASENNUSOHJEET
INDUKTIOLIESITASOT
HOOVER - Via Privata Eden Fumagalli - 20047 Brugherio (Milano) - Italy
BRUGS- OG INSTALLATIONSVEJLEDNING
INDUKTIONSKOGEPLADER
1 GB
READ THE INSTRUCTIONS BOOKLET CAREFULLY TO MAKE THE MOST OF YOUR HOB.
We recommend you keep the instructions for installation and use for later reference, and before installing the hob, note its serial number
below in case you need to get help from the after sales service.
We are constantly striving to improve product quality and as such may modify appliances to incorporate the latest technical improvements.
Induction hobs conform to directives 73/23/CEE and 89/336/CEE.
Identification plate
(located under the hob's bottom casing)
Made in FRANCE - 232 -
220 - 240 V
P. Motors = 30 W
Mod : FE GD21 RB
P. Maxi (Oven) - 2350 W
Code: 39354774 - 0306 0511
Mod: FE GD21 RB
Code: 39354774 - 0306 0511
220 - 240 V
Code: 39354774
- 0306 0511
Code: 39354774
- 0306 0511
Code: 39354774
- 0306 0511
• It is strongly recommended to keep children away from the cooking zones while they are in operation or when they are switched off,
so long as the residual heat indicator is on, in order to prevent the risks of serious burns.
• When cooking with fats or oils, take care always to watch the cooking process as heated fats and oils can catch fire rapidly.
• The hob’s control area is sensitive, do not place hot containers on it.
• Aluminium foil and plastic pans must not be placed on heating zones.
• After every use, some cleaning of the hob is necessary to prevent the build up of dirt and grease. If left, this is recooked when the
hob is used and burns giving off smoke and unpleasant smells, not to mention the risks of fire propagation.
• Do not left metallic objects such as knives, forks, spoons or lids on the induction zone,because if they are too large or too heavy, they
could become hot.
• Never cook food directly on the glass ceramic hob. Always use the appropriate cookware.
• Always place the pan in the centre of the unit that you are cooking on.
• Do not use the surface as a cutting board.
• Do not slide cookware across the hob.
• Do not store heavy items above the hob. If they drop onto the hob, they may cause damage.
• Do not use the hob as a working surface.
• Do not use the hob for storage of any items.
• In the unlikely event of a surface crack appearing, do not use the hob. Immediately disconnect the hob from the electrical power supply
and call the After Sales Service.
GENERAL WARNINGS
COOKING HOB
Cooking zones
Supply voltage (V/Hz)
Installed electric power (W)
Product size
(W x D x H in mm)
Building-in dimensions
(AXB)
4 Induction 4 Induction
220-240/50 220-240/50
568 x 499 x 55 746 x 499 x 55
HVI 740HVI 640
Installing a domestic appliance can be a complicated operation which if not carried out correctly, can seriously affect consumer
safety. It is for this reason that the task should be undertaken by a professionally qualified person who will carry it out in
accordance with the technical regulations in force. In the event that this advice is ignored and the installation is carried out
by an unqualified person, the manufacturer declines all responsibility for any technical failure of the product whether or not
it results in damage to goods or injury to individuals.
2 GB
BUILT-IN
The furniture in which your hob will be installed and all adjacent
furniture, should be made from materials that can withstand high
temperatures. In addition, all decorative laminates should be fixed
with heat-resistant glue.
Installation:
• A watertight seal is supplied with the hob.
Before fitting:
- turn the hob upside down, with the glass surface facing downwards.
Make sure the glass is protected.
- fit the seal round the hob.
- make sure that it is correctly fitted to avoid any leakage into the
supporting cabinet.
• It it important to fit the hob on a level supporting surface.
• Deformations caused by incorrect fitting can alter the specifications
of the worktop and the performance of the hob.
• Leave a gap of at least 5 cm between the appliance and any
neighbouring vertical surfaces.
• It is absolutely essential that the recess conforms with the
dimensions indicated.
• The height of the flush-mounted part of the hob is 5,5 cm.
• If there is an intermediate division :
- the clearance between the bottom of the casing and an
intermediate floor or part of a furniture unit must greater than
2,5 cm so as to allow air circulate.
The minimum distance should be 8 cm.
- furthermore, you should ensure that there is at the rear a
ventilation (8 cm) on all the width.
• You can not build the hob in above an oven with no fan, a
dishwasher, fridge, freezer or washing machine.
• The body of the hob is fitted which 4 location holes to take the
fixing clamps intended to fix the hob in the unit. Place the 4 fixing
clamps, before building-in the hob, in such a way that the hob
is placed perfectly in the support unit.
INSTALLATION
Seal
Hob
25 mm
mini
50 mm
Opening
500 X 50
Opening
500 X 10
"The installation must conform to the standard directives."
The manufacturer declines all responsibility for any damage that
may be caused by unsuitable or unreasonable use.
Warning :
• Always check before any electrical operation, the supply tension
shown on the electricity meter, the adjustment of the circuit-
breaker, the continuity of the connection to earth to the installation
and that the fuse is suitable.
• The electrical connection to the installation should be made via
a socket with a plug with earth, or via an omnipole cut-out switch
with an opening gap of at least 3 mm.
If the appliance has a socket outlet, it must be installed so that
the socket outlet is accessible.
ELECTRICAL CONNECTION
• The yellow/green wire of the power supply cable must be
connected to the earth of both power supply and appliance
terminals.
• The manufacturer cannot be held responsible for any accidents
resulting from the use of an appliance which is not connected
to earth, or with a faulty earth connection continuity.
• Any queries regarding the power supply cord should be referred
to After Sales Service or a qualified technician.
The hob is fitted with a power supply cord which allows it to
be connected only to a power supply of 220-240 V between
phases or between phase and neutral.
• Connect to a socket, to choose the correct fuse, you must refer
on the table.
It is however possible to connect the hob to :
Two phases 220-240V2~, Threephases 220-240V3~
or Three phases 380-415V3N~.
To proceed to the new connection, you must adhere the following
instructions.
• Before making the connection make sure that the installation is
protected by a suitable fuse, see table, and that it is fitted with
wires of a large enough section to supply the appliance normally.
1- Operations to be carried out on the existing connection :
- turn over the hob, glass side against the work top, taking care
to protect the glass.
- open the cover.
- pull out the supply cord :
. remove the screws retaining the shunt bars and the conductors
of the supply cord,
. unscrew he cable clamp to release the power supplying cord,
. pull out the supply cord.
2- Operations to be carried out to make a new connection :
- choose the power supply cord in accordance with the
recommendations in the table.
- pass the power supply cable into the clamp.
- strip the end of each conductor of the supply cord on a 10 mm
length, by taking in account the requested length of the cord for
the connection to the terminal block.
- according to the installation and with the help of shunt bars which
you should have recovered in the first operation, fix the conductor
as shown on the chart.
- screw the cable clamp and fix the cover.
CONNECTION TO THE TERMINALS ON THE TERMINAL BLOCK:
HVI 740
HVI 640

Termékspecifikációk

Márka: Hoover
Kategória: sütő
Modell: HVI 740 X

Szüksége van segítségre?

Ha segítségre van szüksége Hoover HVI 740 X, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók sütő Hoover

Hoover

Hoover HOMCC3U1178IN Útmutató

14 Január 2025
Hoover

Hoover HGF 6040 W Útmutató

13 Január 2025
Hoover

Hoover HOT3161BI Útmutató

13 Január 2025
Hoover

Hoover HHC3U111IN/E Útmutató

11 Január 2025
Hoover

Hoover FOHMO837X Útmutató

9 Január 2025
Hoover

Hoover HO6 T1T1HTB Útmutató

8 Január 2025
Hoover

Hoover HHK64C Útmutató

7 Január 2025
Hoover

Hoover H9S 316 MX Útmutató

18 December 2024
Hoover

Hoover H-HOB 700 INDUCTION HIES644DB1N Útmutató

7 December 2024
Hoover

Hoover HDIMC30 Útmutató

7 December 2024

Útmutatók sütő

Legújabb útmutatók sütő

AEG

AEG Competence 573 V W Útmutató

2 Április 2025
Samsung

Samsung BQ1AD4T243 Útmutató

2 Április 2025
Zanussi

Zanussi zhn 723 zht 74 kp Útmutató

2 Április 2025
Atag

Atag ox60 a Útmutató

2 Április 2025
Electrolux

Electrolux EON3010 Útmutató

2 Április 2025
De Dietrich

De Dietrich DOP790 Útmutató

2 Április 2025
Krefft

Krefft RGC 051M Útmutató

2 Április 2025
Stoves

Stoves SE60MFPTi Útmutató

2 Április 2025
Wolf

Wolf CI30460C/B Útmutató

2 Április 2025
Atag

Atag OX 6024GL Útmutató

1 Április 2025