Használati útmutató Hitachi C 7SB2
Hitachi
Cirkelzagen
C 7SB2
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hitachi C 7SB2 (49 oldal) a Cirkelzagen kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/49
Model Circular saw
Modèle Scie circulaire
Modelo
Sierra circular
C 7SB2
DOUBLE INSULATION
DOUBLE ISOLATION
AISLAMIENTO DOBLE
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la
mort ou de sérieuses blessures corporelles!
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit.
Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce
mode d’emploi à la disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent
l’outil motorisé. Ce mode d’emploi doit être conservé dans un endroit sûr.
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and
understand this manual BEFORE operating the power tool. Please keep this manual
available for other users and owners before they use the power tool. This manual should be
stored in safe place.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede resultar
en lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y com-
prenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual para
que puedan leerlo otras personas antes de utilizar la herramienta eléctrica. Este manual
debe ser guardado en un lugar seguro.
2
CONTENTS
TABLE DES MATIERES
ÍNDICE
Página
ESPECIFICACIONES ............................................38
MONTAJE Y OPERACIÓN ........................................39
APLICACIONES ....................................................39
ANTES DE LA OPERACIÓN ..................................39
AJUSTE DE LA SIERRA ANTES DE
UTILIZARLA ....................................................40
PROCEDIMIENTOS DE CORTE ...........................42
MONTAJE Y DESMONTAJE DE LA
CUCHILLA DE LA SIERRA .............................43
MANTENIMIENTO E INSPECCIÓN .........................44
ACCESORIOS ...........................................................46
ACCESORIOS ESTÁNDAR ...................................46
ACCESORIOS OPCIONALES ...............................46
LISTA DE PIEZAS .....................................................47
Français
Español
English Page
IMPORTANT SAFETY INFORMATION .................. 3
MEANINGS OF SIGNAL WORDS ......................... 3
MEANINGS OF SYMBOLS ................................... 3
SAFETY ..................................................................... 3
GENERAL POWER TOOL SAFETY
WARNINGS ......................................................3
CIRCULAR SAW SAFETY WARNINGS ...................4
SPECIFIC SAFETY RULES AND SYMBOLS ......... 6
DOUBLE INSULATION FOR SAFER
OPERATION .....................................................7
FUNCTIONAL DESCRIPTION ....................................8
NAME OF PARTS ....................................................8
SPECIFICATIONS ...................................................8
Page
ASSEMBLY AND OPERATION ...................................9
APPLICATIONS .......................................................9
PRIOR TO OPERATION ..........................................9
ADJUSTING THE SAW PRIOR TO USE ................10
CUTTING PROCEDURES .....................................12
MOUNTING AND DISMOUNTING THE
SAW BLADE ..................................................13
MAINTENANCE AND INSPECTION ........................14
ACCESSORIES .........................................................16
STANDARD ACCESSORIES .................................16
OPTIONAL ACCESSORIES ...................................16
PARTS LIST ..............................................................47
Page
SPECIFICATIONS .................................................23
ASSEMBLAGE ET FONCTIONNEMENT .................24
APPLICATIONS .....................................................24
AVANT L’UTILISATION ...........................................24
RÉGLAGE DE LA SCIE AVANT
L’UTILISATION ................................................25
PROCEDURES DE COUPE ...................................27
MONTAGE ET DÉMONTAGE DE LA LAME
DE SCIE ..........................................................28
ENTRETIEN ET INSPECTION ..................................29
ACCESOIRES ...........................................................31
ACCESSOIRES STANDARD .................................31
ACCESSOIRES EN OPTION .................................31
LISTE DES PIECES ..................................................47
Página
INFORMACIÓN IMPORTANTE SOBRE
SEGURIDAD ...................................................32
SIGNIFICADO DE LAS PALABRAS DE
SEÑALIZACIÓN .............................................32
SIGNIFICADO DE SÍMBOLOS ..............................32
SEGURIDAD .............................................................32
ADVERTENCIAS DE SEGURIDAD GENERAL
DE LA HERRAMIENTA ELÉCTRICA ..............32
ADVERTENCIAS DE SEGURIDAD DE LA
SIERRA CIRCULAR ........................................34
NORMAS Y SÍMBOLOS ESPECÍFICOS DE
SEGURIDAD ..................................................35
AISLAMIENTO DOBLE PARA OFRECER UNA
OPERACIÓN MÁS SEGURA ..........................37
DESCRIPCIÓN FUNCIONAL ...................................38
NOMENCLATURA .................................................38
Page
INFORMATIONS IMPORTANTES
DE SÉCURITÉ ................................................17
SIGNIFICATION DES MOTS
D’AVERTISSEMENT .......................................17
SIGNIFICATION DES SYMBOLES .........................17
SECURITE .................................................................17
AVERTISSEMENTS DE SÉCURITÉ GÉNÉRAUX
CONCERNANT LES OUTILS ÉLECTRIQUES
...17
AVERTISSEMENTS DE SÉCURITÉ RELATIFS
À LA SCIE CIRCULAIRE .................................19
RÈGLES DE SÉCURITÉ SPÉCIFIQUES ET
SYMBOLES ....................................................20
DOUBLE ISOLATION POUR UN
FONCTIONNEMENT PLUS SUR ....................22
DESCRIPTION FONCTIONNELLE ...........................23
NOM DES PARTIES ..............................................23
English
3
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
fl ammable liquids, gases or dust.
Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if
your body is earthed or grounded.
IMPORTANT SAFETY INFORMATION
Read and understand all of the safety precautions, warnings and operating instructions in the Instruction Manual before
operating or maintaining this power tool.
Most accidents that result from power tool operation and maintenance are caused by the failure to observe basic safety
rules or precautions. An accident can often be avoided by recognizing a potentially hazardous situation before it occurs,
and by observing appropriate safety procedures.
Basic safety precautions are outlined in the “SAFETY” section of this Instruction Manual and in the sections which contain
the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or machine damage are identifi ed by WARNINGS on the power tool
and in this Instruction Manual.
NEVER use this power tool in a manner that has not been specifi cally recommended by HITACHI.
MEANINGS OF SIGNAL WORDS
WARNING indicates a potentially hazardous situations which, if ignored, could result in death or serious injury.
CAUTION indicates a potentially hazardous situations which, if not avoided, may result in minor or moderate injury, or
may cause machine damage.
NOTE emphasizes essential information.
MEANINGS OF SYMBOLS
SAFETY
GENERAL POWER TOOL SAFETY WARNINGS
WARNING:
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Symbols
WARNING
The following show symbols used for the machine. Be sure that you understand their meaning before use.
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fi re and/or serious
injury.
Always wear eye protection.
Always wear hearing protection.
Termékspecifikációk
| Márka: | Hitachi |
| Kategória: | Cirkelzagen |
| Modell: | C 7SB2 |
Szüksége van segítségre?
Ha segítségre van szüksége Hitachi C 7SB2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Cirkelzagen Hitachi
4 Július 2024
Útmutatók Cirkelzagen
- Cirkelzagen Parkside
- Cirkelzagen Worx
- Cirkelzagen Makita
- Cirkelzagen Black & Decker
- Cirkelzagen DeWalt
- Cirkelzagen Skil
- Cirkelzagen Malmbergs
- Cirkelzagen Triton
Legújabb útmutatók Cirkelzagen
16 Október 2024
14 Október 2024
13 Október 2024
13 Október 2024
12 Október 2024
11 Október 2024
7 Október 2024
10 Július 2024
10 Július 2024
9 Július 2024