Használati útmutató Hendi 820612

Hendi vágógép 820612

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hendi 820612 (12 oldal) a vágógép kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/12
KNIFE SHARPENER
820612
You should read this user manual carefully before using the appliance.
Bevor Sie das Gerät in Betrieb nehmen, sollten Sie diese Gebrauchsanweisung aufmerksam lesen.
Alvorens de apparatuur in gebruik te nemen dient u deze gebruiksaanwijzing aandachtig te lezen.
Przed uruchomieniem urządzenia należy koniecznie dokładnie przeczytać niniejszą instrukcję obsługi.
Lisez attentivement ce mode d’emploi avant d’utiliser l’appareil .
Prima di utilizzare lapparecchio in funzione leggere attentamente le istruzioni per l’uso.
Citiţi cu atenţie prezentul manual de utilizare înainte de folosirea aparatului.
Внимательно прочитайте руководство пользователя перед использованием прибора.
Πρέπει να διαβάσετε αυτές τις οδηγίες χρήσης προσεκτικά πριν χρησιμοποιήσετε τη συσκευή.
2
Keep these instructions with the appliance.
Diese Gebrauchsanweisung bitte beim Gerät aufbewahren.
Bewaar deze handleiding bij het apparaat.
Zachowaj instrukcję urządzenia
Gardez ces instructions avec cet appareil.
Conservate le istruzioni insieme all’apparecchio.
Păstraţi maualul de utilizare aturi de aparat.
Хранить руководство вместе с устройством.
Φυλάξτε αυτές τις οδηγίες μαζί με τη συσκευή.
3
EN
Always place the sharpener on a flat and stable surface, firmly grip the handle
and make sure there is no possibility to cut yourself while sharpening. Don’t
use this sharpener for serrated blades or scissors.
Instructions:
This sharpener has three slots each engraved with a name: COARSE, FINE &
CERAMIC.
COARSE: for blunt stainless steel knifes.
Use this only if your knife is very blunt. Run the knife from its heel to its point
(never the other way around) through the slot engraved with ‘COARSE’ while ap-
plying slight pressure. Repeat this three times and continue with ‘FINE’ sharpen-
ing to remove any burrs that result from the re-edging and rough honing process.
This method brings back the edge to your knife and should only be done once
every six months or if the knife is really blunt.
FINE: for edge honing stainless steel knifes.
Run the knife from its heel to its point (never the other way around) through the
slot engraved with ‘FINE’ without pressure. Repeat this five times, rinse the knife
with running water and dry thoroughly.
This method can be used on it’s own to maintain a sharp blade. It’s recommended
to do this approximately once a week. The rods may discolour after use, this
is normal.
CERAMIC: for ceramic knifes only.
Lightly pull the knife from its heel to its point (never the other way around)
through the slot engraved with ‘CERAMIC’ without pressure. Repeat this three to
five times, rinse the knife with running water and dry thoroughly.
After use:
Do not put the sharpener in the dishwasher or submerge in in water. Store be-
yond the reach of children to avoid any accidents.

Termékspecifikációk

Márka: Hendi
Kategória: vágógép
Modell: 820612

Szüksége van segítségre?

Ha segítségre van szüksége Hendi 820612, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók vágógép Hendi

Hendi

Hendi 820605 Útmutató

26 Augusztus 2024
Hendi

Hendi 237922 Útmutató

26 Augusztus 2024
Hendi

Hendi 820612 Útmutató

20 Augusztus 2024
Hendi

Hendi 630402 Útmutató

27 Július 2024
Hendi

Hendi 570159 Útmutató

22 Július 2024
Hendi

Hendi 224403 Útmutató

29 Május 2024

Útmutatók vágógép

Legújabb útmutatók vágógép