Használati útmutató Harman Kardon Drive + Play

Harman Kardon nincs kategorizálva Drive + Play

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Harman Kardon Drive + Play (12 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/12
Owner’s Manual
INTRODUCTION
Thank you for purchasing Harman Kardon’s Drive + Play™,
an elegant mobile audio solution that provides the driver with
total iPod®control, including full music browsing capability.
We’ve organized this manual to make installation and operation
as simple and trouble-free as possible. Please read it thoroughly
before you begin installing Drive + Play. Remember to keep your
sales receipt with this manual in a safe place, so both are avail-
able for future reference.
If you have any questions about the installation, please contact
us at:
1 – (516) – 255 – HKHK (4545)
Or on the Web at:
www.harmankardon.com
iPod®Requirements
Drive + Play is designed to work with all iPods equipped with
the following Apple®hardware and software:
1. iPod dock port
2. iPod software
As long as both of these requirements are met, Drive + Play
can be easily added to virtually any mobile audio system for
total control of your iPod.
Drive + Play Warnings
Distraction Warning
Do not connect or disconnect your iPod or program Drive + Play
while driving. Always be careful and attentive to your vehicle
and the traffic around you. Always obey all traffic laws while
driving. Always pull off the road and park in a position you are
sure presents absolutely no risk before browsing your iPod or
adjusting the settings on your Drive + Play.
Connecting the iPod
Always hold the Drive + Play’s iPod dock connector by its
sides and gently insert (or remove) the dock connector. Never
use excessive force to insert or remove the connector, or
damage to your iPod may occur.
Lost Data
Harman/Kardon is not responsible for any lost data on your
iPod when using the Drive + Play. Be sure to back up the
audio data files on your computer.
Loud Music and Hearing
Playing loud music in a vehicle can permanently damage your
hearing, as well as hinder your ability to hear traffic. The max-
imum volume levels achievable with this product, combined
with high power amplification, may exceed safe levels for
extended listening. We recommend using low volume levels
when driving. Harman/Kardon accepts no liability for hearing
loss, bodily injury, or property damage as a result of use or
misuse of this product.
Headphones and Driving
Do not use headphones while operating a vehicle. This practice
is illegal in some areas. Always be careful and attentive to your
vehicle and the traffic around you. Always obey all traffic laws
while driving. Drive + Play’s audio output is not suitable for
driving headphones and is intended to output a signal appro-
priate for an audio system’s line-level input jack.
About Installation
Although we recommend professional installation for your
Harman/Kardon Drive + Play, this product is designed for
do-it-yourself installation as well, especially when using the
wireless FM transmission method (see page 4). Although the
enclosed instructions explain how to install the Drive + Play
in a general sense, they do not show the exact methods for
your particular vehicle. After reading the manual, if you feel
uncomfortable in performing the necessary steps to install
the product, consider asking your car-audio dealer about
professional installation options.
iPod
Dock Port
2 INTRODUCTION
Model Description and
Minimum Software Version/Date
3G Mini 4G Photo 5G Nano
Buttons above All Click Color Color Color
touch wheel Wheel Screen Screen Screen
v2.2 v1.1 v3.0 v1.0 v1.0 v1.0
2/04 3/04 7/04 10/04 6/05 9/05
INSTALLATION
Parts List
Drive + Play includes the following components and parts:
• Text Display With Universal Mounting Base and Attached
Cable (3m)
• Control Knob With 30° Mounting Base and Attached
Cable (3m)
• Electronics Enclosure (the Brain)
• 12-Volt Accessory Power Cable (2m) With Cigarette
Lighter Adaptor
• 12-Volt Power Harness (0.5m) With In-Line Fuse Holder
(for direct connection to the vehicle’s electrical system)
• Line Out Cable (1.6m): Stereo 3.5mm (M) Plug to L/R RCA
(M) Plugs
• iPod Cable (3m): 8-Pin Mini DIN (M) Plug to iPod Dock
Connector
• (2) Control Knob Bases: 0° and 60°
• (2) Mounting Plates for Knob Base and Display Base
• (10) Mounting Screws: (3) Knob Base, (3) Display Base and
(4) Electronics Enclosure
• (6) Cable Ties, Black
• (2) Hex Keys: 3mm and 1.5mm
• (2) Adhesive Mounting Pads
• (2) Alcohol Prep Pads
• Warranty Card
Tools and Precautions
To install Drive + Play components, we recommend using the
following tools:
• Electric or cordless drill with drill bit set
• Phillips screwdriver set
• Pencil
• Protective eyewear
Before starting the installation, please observe the following
precautions:
• Turn off all audio system power, including the iPod, before
making any connections.
• Always wear protective eyewear when using tools.
Choosing Installation Locations
IMPORTANT: Drive + Play should be installed according to
these instructions and relevant regulations. No part of this
system should obstruct the driver’s view of the road or
vehicle controls or information displays necessary for
safely operating the vehicle. The text display should be
positioned to eliminate glare and reflections, and should be
as close as possible to the driver’s normal line of sight.
Drive + Play Components
Drive + Play consists of three main components: Text Display,
Control Knob and Electronics Enclosure. They operate together
as a system to make controlling your iPod easy, and to route the
audio signal to your mobile audio system. All three components
must be installed. You can choose wireless FM transmission,
wired FM transmission (adaptor sold separately), or direct con-
nection of the line-output audio signal for the audio interface.
Text Display Location
The Text Display shows current iPod information and is similar
to the display on your iPod. It comes with a three-position
pivot arm for virtually limitless viewing adjustment. You can
install the unit in a variety of locations, as long as the pro-
posed site offers a direct view of the display. For easiest view-
ing, mount the unit near other instrument-panel gauges or on
top of the dashboard.
Control Knob Location
The Control Knob allows you to control the iPod much like the
iPod Click Wheel. The unit comes with three interchangeable
bases so you can choose the most comfortable operation angle.
Ideally, you should install the Control Knob in a location that pro-
vides comfortable access while driving where you can easily feel
and operate it without taking your eyes off the road.
continued on next page...
INSTALLATION 3
INSTALLATION
Install Text Display
Install Control Knob
Install
Electronics
Enclosure
(on windshield
glass)
(on gauges
panel) (on dash)
(on dash)
(on console)
(under
seat)
(behind
radio)
(in glove
box)

Termékspecifikációk

Márka: Harman Kardon
Kategória: nincs kategorizálva
Modell: Drive + Play

Szüksége van segítségre?

Ha segítségre van szüksége Harman Kardon Drive + Play, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nincs kategorizálva Harman Kardon

Harman Kardon

Harman Kardon FSTS1 Útmutató

21 December 2024
Harman Kardon

Harman Kardon Drive + Play 2 Útmutató

17 December 2024
Harman Kardon

Harman Kardon Drive + Play Útmutató

17 December 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

Holosun

Holosun Paralow HS403B Útmutató

25 December 2024
Lucide

Lucide Lorenz 74403/06/97 Útmutató

25 December 2024
Lucide

Lucide Jur 72405/57/30 Útmutató

25 December 2024
Lucide

Lucide Pia 45580/01/30 Útmutató

25 December 2024
Lucide

Lucide Pia 45280/03/30 Útmutató

25 December 2024
Lucide

Lucide Mesh 30773/01/30 Útmutató

25 December 2024
Lucide

Lucide Swits 22504/03/31 Útmutató

25 December 2024
Lucide

Lucide Bryton 13528/01/30 Útmutató

25 December 2024
Lucide

Lucide Saar 03423/48/30 Útmutató

25 December 2024
Festo

Festo OVEL Útmutató

25 December 2024