Használati útmutató Hammer N4400

Hammer Fűrészgép N4400

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hammer N4400 (44 oldal) a Fűrészgép kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/44

Keep this manual handy and in good condition for continual reference!

User Manual

Bandsaw

N4400

Dok.ID: 503-15-4502 • Englisch • 2010-10-01

(Translation)

Bandsaw

N4400

For the safety of all personnel, it is necessary to conscientiously study this manual before assembling and

putting the machine into operation. This manual must be kept in good condition, as it is considered to be a

part of the machine. Furthermore, keep the manual handy in the vicinity of the machine so that it is acces-

sible to personnel when they are using, maintaining or repairing the machine.

Attention: Upon arrival, the machine must be inspected immediately. If the machine was damaged during

transport or if parts are missing, a written record of the problems must be submitted to the forwarding

agent and a damage report must be drawn up. Be sure to also notify your supplier straight away.

KR-FELDER-STR 1

A-6060 Hall in Tirol

Tel.: +43 (0) 5223 45 0 90

Fax.: +43 (0) 5223 45 0 99

E-Mail: info@hammer.at

Internet: www.hammer.at

HAMMER A product of the FELDER GROUP



Bandsaw

N4400

Table of contents

Table of Contents

1 General .......................................................................................................... 5

1.1 Explanations of the symbols .............................................................................................5

1.2 Information regarding the manual ....................................................................................5

1.3 Liability and warranty .....................................................................................................6

1.4 Copyright ......................................................................................................................6

1.6 Spare parts ...................................................................................................................6

1.7 Disposal ........................................................................................................................7

2 Safety ............................................................................................................ 8

2.1 Intended use ..................................................................................................................8

2.2 Manual contents ............................................................................................................8

2.3 Making changes and modifications to the machine.............................................................8

2.4 Responsibilities of the operator .........................................................................................9

2.5 What is required of the personnel ....................................................................................9

2.6 Work safety ..................................................................................................................9

2.7 Personal safety .............................................................................................................10

2.8 Hazards arising from the machine ..................................................................................10

2.9 Other risks ..................................................................................................................10

3 Declaration of Conformity ............................................................................. 11

4 Technical data .............................................................................................. 12

4.1 Dimensions and weight .................................................................................................12

4.2 Operation and storage conditions ..................................................................................12

4.3 Electrical connection .....................................................................................................12

4.4 Noise emissions ...........................................................................................................13

4.5 Dust extraction .............................................................................................................14

5. Setting up the machine ................................................................................. 15

5.1 Overview ....................................................................................................................15

5.2 Data plate ...................................................................................................................16

6 Setup and installation ................................................................................... 17

6.1 Safety instructions ........................................................................................................17

6.2 Positioning ..................................................................................................................17

6.2.1 Safety instructions ...................................................................................................18

6.2.2 Setting up the work table .........................................................................................18

7 Operation .................................................................................................... 19

7.1 Safety instructions ........................................................................................................19

7.2 Switching on the machine .............................................................................................20

7.3 Authorised work techniques ...........................................................................................20

7.4 Authorised work techniques ...........................................................................................21

7.4.1 Positioning the 90° end stop on the work table ...........................................................21

7.4.2 Parallel cutting fence ................................................................................................21

7.4.3 Saw blade replacement/tension ................................................................................22

7.4.4 Longitudinal cut along the marked line .......................................................................22

7.4.5 Cutting round work-pieces in the transverse direction ...................................................23

7.4.6 Longitudinal cut of narrow or thin work-pieces with the guide fence ...............................23

Termékspecifikációk

Márka:	Hammer
Kategória:	Fűrészgép
Modell:	N4400

Szüksége van segítségre?

Ha segítségre van szüksége Hammer N4400, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók Fűrészgép Hammer

Hammer N4400 Útmutató

14 Július 2024

Útmutatók Fűrészgép

Legújabb útmutatók Fűrészgép

Bavaria By Einhell BHS 66 Útmutató

3 Április 2025

Bavaria By Einhell BPS 600 E Útmutató

3 Április 2025

Makita DCS4610 Útmutató

2 Április 2025

Makita DPC6430 Útmutató

1 Április 2025

Makita DCS431 Útmutató

1 Április 2025

Makita DCS430 Útmutató

1 Április 2025

Makita EK6101 Útmutató

1 Április 2025

Makita DCS6401 Útmutató

1 Április 2025

Kraftronic KT-ST 550 Útmutató

30 Március 2025

Kraftronic KT-US 650 Útmutató

30 Március 2025