Használati útmutató Hall Research UHBX-SW3-S

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hall Research UHBX-SW3-S (12 oldal) a AV hosszabbító kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/12
Quick Start Guide
VGA / HDMI / MHL Auto-Switching
Sender
W Output ith
UHBX-SW3-S
QSG 39 1.0 12 Rev
Hall Research 714.641.6607 2 Page
D
De
es
sc
cr
ri
ip
pt
ti
io
on
n
The Model UHBX-SW3-S is a video extender with 3 video inputs in a
compact surface mountable : form factor. The video inputs are
Input 1 Definition Link HDMI or MHL ( -Mobile High )
Input 2 – HDMI
Input 3 with separate audio VGA or YPbPr
The device can manually or automatically switch between the various
video inputs, and send user defined RS232 commands to control the
On/Off state of the display. The extender also features an IR sensor and can
extend IR control signals to the Receiver. For a few IR protocols, if the
format, data, and address bytes of the IR signal are known, the extender
may also be capable of generating the IR signals.
U (Cat6) a sing just a single twisted pair cable, the extender connects to
compatible receiver, such as the model UHBX-R-PSE.
The single Cat6 cable carries all and control signals (AV RS232 or IR) from
the extender . Tto the receiver he same Cat6 cable also delivers power to
the extender -over-using Power HDBaseT (PoH) standard as defined by
HDBaseT® . Alliance There is no power input connection on the extender,
so a PoH compliant receiver that acts as PSE (Power Sourcing Equipment)
is required.
Hall Research 714.641.6607 3 Page
C
Co
on
nn
ne
ec
ct
ti
io
on
n
t
to
o
t
th
he
e
R
Re
ec
ce
ei
iv
ve
er
r
First ensure that the Receiver power is off by unplugging the power supply
from the Receiver. Then connect a Cat6 HDBaseT Output of from the RJ45
the extender to the Receiver. There are two RJ45's on the extender, so
make sure to use the one labeled as HDBaseT Output.
C
Co
on
nn
ne
ec
ct
ti
io
on
n
t
to
o
D
Di
is
sp
pl
la
ay
ys
s
w
wi
it
th
h
N
Na
at
ti
iv
ve
e
H
HD
DB
Ba
as
se
eT
T
i
in
np
pu
ut
ts
s
The Extender in can be directly plugged to with displays or projectors
HDBaseT® inputs. s In this configuration the extender still send RS232
control commands to (check your the display display’s specifications for
details). T o power up the extender, a power inserter would be required as
shown below (Hall Research PoH inserter p/n 511 17W- -POH ).

Termékspecifikációk

Márka: Hall Research
Kategória: AV hosszabbító
Modell: UHBX-SW3-S

Szüksége van segítségre?

Ha segítségre van szüksége Hall Research UHBX-SW3-S, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók AV hosszabbító Hall Research

Útmutatók AV hosszabbító

Legújabb útmutatók AV hosszabbító