Használati útmutató GME TX4600

GME rádió TX4600

Olvassa el alább 📖 a magyar nyelvű használati útmutatót GME TX4600 (32 oldal) a rádió kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/32

T X 4 6 0 0 I N S T R U C T I O N M A N UA L PA G E 1

Ingress protected 5 watt UHF CB radio

I N S T R U C T I O N M A N U A L

PAG E 2 INS TRUC TION MAN UAL TX4600

IMPORTANT INFORMATION .........................................3

SAFETY INFORMATION................................................3

EMERGENCY CHANNELS.............................................3

TELEMETRY CHANNELS ...............................................3

FEATURES ...................................................................4

CONTROLS ..................................................................5

Front Panel ............................................................5

LCD Display ...........................................................5

Microphone ...........................................................5

GENERAL OPERATION .................................................6

Function Key .........................................................6

Volume On/Off ......................................................6

Selecting Channels ................................................6

Transmitting ..........................................................6

Squelch Control .....................................................6

Squelch Sensitivity .................................................6

Priority Channel .....................................................7

Duplex Operation ..................................................7

CTCSS .........................................................................7

Overview ...............................................................7

Monitoring the Channel........................................7

Selecting the Tone Set ...........................................7

Selecting the Required CTCSS Tone ........................7

Enabling CTCSS on a Channel................................7

Disabling CTCSS on a Channel ...............................8

SCANNING .................................................................8

Overview ...............................................................8

Scan Groups ..........................................................8

Selecting the Scan Group .......................................8

Programming Scan Channels .................................8

To Start Scanning ..................................................9

To Stop Scanning ...................................................9

OPEN SCAN MODE .....................................................9

Using Scan in the Open Scan Mode .......................9

GROUP SCAN MODE ...................................................9

Setting Up the Group Scan ..................................10

Scanning in the Group Scan Mode .......................10

Using Two Group Scan or Two Open Scan Modes .10

SELECTIVE CALLING ..................................................11

Overview .............................................................11

SelCall Identiﬁcation Number ...............................11

SelCall Indent Names ..........................................11

The Quiet Mode (Q) .............................................11

SelCall Memories .................................................12

USING SELCALL ........................................................12

Entering a SelCall Indent .....................................12

Sending a SelCall ................................................12

................................................12Call Acknowledge

Storing SelCall Indents .........................................12

Recalling SelCall Indents From Memory ................13

Naming Your SelCall Indents ................................13

......................................13Displaying Alpha Names

Entering and Storing a SelCall Name ....................13

Receiving SelCalls ................................................14

Cancelling the SelCall Alert ..................................14

Quiet Mode .........................................................15

Setting Up the Quiet Mode ..................................15

Activating the Quiet Mode ...................................15

De-activating the Quiet Mode ..............................15

Receiving Signals in the Quiet Mode ....................15

Scanning in the Quiet Mode ................................16

To Scan in the Quiet Mode ..................................16

16Receiving Signals while Scanning in the Quiet Mode

GROUP CALLING.......................................................16

Programming and Sending Group Calls ................17

LISTENING CHANNELS ..............................................17

Setting the Frequency Steps .................................18

Activating Listening Channels ..............................18

Programming the Frequencies ..............................18

Setting Alpha Labels for your Listening Channels ..18

SEEK MODE ..............................................................19

Enabling the Seek Mode ......................................19

Scanning for Active Frequencies in Seek Mode .....19

Setting Seek Mode Frequency Limits ....................19

MENU SETTINGS .......................................................20

Overview .............................................................20

............................21Frequency / Alpha Adjustments

Setting the Squelch Sensitivity .............................21

Selecting the Scan Mode .....................................21

Selecting Duplex ..................................................22

CTCSS .......................................................22 Tones

Lamp Colour .......................................................23

Battery / S Metre / Alpha Selection .......................23

LCD Contrast .......................................................24

..................................................24Beep Tone Level

INSTALLATION ..........................................................24

General ...............................................................24

Installing the Unit ................................................25

DC Connections ..................................................25

Antenna Installation ............................................26

Noise Suppression ...............................................26

Disconnecting the Microphone.............................26

UHF CB OPERATING FREQUENCIES ...........................27

CTCSS TONE FREQUENCY CH ..............................28ART

SPECIFICATIONS .......................................................29

SC CONTRACT WARRANTY AGAINST DEFECTS ..........30

CONT ENT S

TX4600 INS TRUC TION MAN UAL PA GE 3

IMPORTA NFONT I RMATION

CONCERNIN C OG UHF B RADI

The use of the Citizen Band radio service

is licensed in Australia by the ACMA Radio

communications (Citizens Band Radio Stations)

Class Licence and in New Zealand by the

Ministry of Economic Development New

Zealand (MED). A General User Radio Licence

for Citizens Band radio and operation is subject

to conditions contained in those licences.

The class licence for users and equipment

operating in the CB/PRS 477 MHz band has

been amended. This radio meets the new 80

channel standard.

In simple terms the same amount of spectrum is

available; however,

radio transceivers can now

operate in a narrower bandwidth and hence

use less spectrum. These radios are generally

referred to as narrowband or 12.5 kHz radios.

By using 12.5 kHz channel spacing instead of

25 kHz, the 40 channels originally allocated

can now be expanded to 80 channels thereby

doubling the channel capacity and relieving

congestion in the UHF CB/PRS band.

Original 40 channel wideband Radios will

continue to operate on the original 40 channels,

however they will not be able to converse on the

newer channels 41 – 80. The newer narrowband

radios will be able to converse with all older 40

channel wideband radios on all channels 1 to 40 as

well as the newer channels allocated from 41 to 80.

The mixing of narrowband and wideband radios

in the same spectrum can cause some possible

operating issues of interference and varying

levels of received volume.

S NF OAFET Y I RMAT ION

The TX4600 is a radio transmitting device.

 •Whentransmitting,keeptheantennamore

than 25 mm from any part of the head

or body.

 •Donottransmitnearelectricalblasting

equipment or in explosive atmospheres.

 •Do not allow children to operate   aradio

transmitter unsupervised.

POSSIBLE ISSUES

When a new narrowband radio receives a

transmission from an older wideband radio the

speech may sound loud and distorted - simply

adjust the radio volume for best performance.

When an older wideband radio receives a signal

from a new narrowband radio, it may sound quiet

- simply adjust your volume for best performance.

There can be interference from a transmitting

radio if it is close to another transmitting radio

using a channel adjacent to the channel you are

listening to. Simply try going up or down a few

channels from the currently selected channel.

The above situations are not a fault of the radio

but a symptom of operating wideband and

narrowband radios in the same bandwidth. This

possible interference will decrease over time as the

population of wideband radios ages and decreases.

Further information and updates are available

from the Australian Communications and Media

Authority (ACMA) at www.acma.gov.au and the

Ministry of Economic Development (MED), Radio

Spectrum Management at: www.rsm.govt.nz

EME YRGE NC CHANNE LS

The ACMA has allocated channels 5/35 for

emergency use only. Channel 5 is the primary Simplex

Emergency Channel. Where a Channel 5 repeater is

available, you should select Duplex on CH 5.

NOTE: Channel 35 is the input channel for

the Channel 5 repeater therefore Channel 35

should also not be used for anything other than

emergency transmissions.

T M ELE ET RY CHA NNELS

ACMA regulations have allocated channels

22 and 23 for telemetry only applications and

have prohibited the transmission of speech on

these channels. Consequently the TX4600 has a

transmit inhibit applied to channels 22 and 23.

In the event additional telemetry/telecomand

channels are approved by the ACMA, these

channels shall be added to those currently listed

where voice transmission is inhibited. Currently

transmissions on channels 61, 62 and 63 are also

inhibited and these channels are reserved for

future allocation.

Termékspecifikációk

Márka:	GME
Kategória:	rádió
Modell:	TX4600

Szüksége van segítségre?

Ha segítségre van szüksége GME TX4600, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók rádió GME

18 Augusztus 2024

18 Augusztus 2024

17 Augusztus 2024

17 Augusztus 2024

15 Augusztus 2024

Útmutatók rádió

Legújabb útmutatók rádió

Blonder Tongue BIDA 550-30 Útmutató

11 December 2024

Blonder Tongue BIDA 750-30 Útmutató

11 December 2024

Blonder Tongue AP-60-860A Útmutató

11 December 2024

Blonder Tongue BIDA 86B-43P Útmutató

11 December 2024

Blonder Tongue BIDA 86B-30P Útmutató

11 December 2024

Muse M-087 MB Útmutató

10 December 2024

Oricom UHF390R Útmutató

10 December 2024

Oricom UHF3954P Útmutató

10 December 2024

Oricom UHF395P Útmutató

10 December 2024

Muse M-075 R Útmutató

10 December 2024