Használati útmutató Galaxy Audio PA6BT

Galaxy Audio hangszóró PA6BT

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Galaxy Audio PA6BT (2 oldal) a hangszóró kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/2
G
G
G
GGA
A
A
AAL
L
L
LL A
A
A
AA X
X
X
XX Y
Y
Y
YY A
A
A
A AU
U
U
UU
D
D
D
DDI
I
I
IIO
O
O
OO Quick Start Guide
PA6BT
Full Range Powered Personal Monitor
Included Components
1. PA6BT x1
3. MSA-1 Stand Adapter x1
2. IEC Power Cable x1
Setup
2.1. 4.
4. Quick Start Guide x1
3.
Connect power cable to PA6BT, connect
other end to a power outlet.
2
Choose the input needed and for what
channel(s) needed:
XLR/1/4" Combo Jack for mic, or
balanced/unbalanced line level.
1/8" for stereo from a media player etc.
3
For a balanced mic signal, plug the XLR
male end of the cable into the XLR/1/4"
Combo Input on the PA6BT. For strong
signals, engage the -20dB Pad Switch to
prevent distortion.
4
For Balanced or Unbalanced Line Level,
plug the 1/4" cable into the XLR/1/4"
Combo Jack on the PA6BT.
5
Connect a female XLR to the Thru
output to feed the channel’s XLR input
to another device.
1
For a stereo signal from an MP3 player,
attach 1/8" stereo cable into the Channel
2 1/8" input.
6
Flip the power switch on.
3
Level controls: turn clockwise to raise the
level. Turn counter-clockwise to lower
the level.
4 5 62
EQ controls - Low/Mid/Hi: To increase the
low, mid, and high frequencies, turn the
appropriate tone control clockwise. To
decrease, turn counter-clockwise.
1
Ensure that both channels and/or the
Bluetooth controls have their levels ®
lowered by turning counter-clockwise.
Stand Mounting (Optional)
1
Attach the MSA-1 to the mic stand, then
Lift the PA6BT over the stand, align it up
with the hole.
2
Bring the PA6BT down onto the stand
gently until secure.
Operation
The Pre Out provides a Line Level mix
of all three channels.
7
Reduce Input Levels if the Clip LED turns
on. Max. level is reached when the yellow
“Comp” light flashes at peak levels. If the
light is on constantly, turn the levels down
to avoid damage to
the PA6BT.
Using Bluetooth - Press the Bluetooth® ®
button. The Bluetooth LED will flash for®
15 seconds. Locate the PA6BT on your
device and select to pair. If pairing fails,
turn Bluetooth off and try again. The®
button also acts as a Stop/Play/Pause.
Powering the unit off will disconnect.
GAL A X Y AUDIO Quick Start Guide
PA6BT
Full Range Powered P ersonal Monitor
Included Components
1. PA6BT x1
3. MSA-1 Stand Adapter x1
2. IEC Power Cable x1
Setup
2.1. 4.
4. Quick Start Guide x1
3.
Connect power cable to PA6BT, connect
other end to a power outlet.
2
Choose the input needed and for what
channel(s) needed:
XLR/1/4" Combo Jack for mi c, or
balanced/unbalanced line level.
1/8" for stereo from a media player etc.
3
For a balanced mic signal, plug the XLR
male end of the cable into the XLR/1/4"
Combo Input on the PA6BT. For strong
signals, engage the -20dB Pad Switch to
prevent distortion.
4
For Balanced or Unbalanced Line Level,
plug the 1/4" cable into the XLR/1/4"
Combo Jack on the PA6BT.
5
Connect a female XLR to the Thru
output to feed the channel’s XLR input
to another device.
1
For a stereo signal from an MP3 player,
attach 1/8" stereo cable into the Channel
2 1/8" input.
6
Flip the power switch on.
3
Level controls: turn clockwis e to raise the
level. Turn counter-clockw ise to lower
the level.
4 5 62
EQ controls - Low/Mi d/Hi: To increase the
low, mi d, and high frequencies, turn the
appropriate tone control clockwi se. To
decrease, turn counter-clock wise.
1
Ensure that both channels and/or the
Bluetooth controls have their levels ®
lowered by turning counter-clockwi se.
Stand Mounting (Optio nal )
1
Attach the MSA-1 to the mic stand, then
Lift the PA6BT over the stand, align it up
with the hole.
2
Bring the PA6BT down onto the stand
gently until secure.
Operation
The Pre Out provides a Line Level mix
of all three channels.
7
Reduce Input Levels if the Clip LED turns
on. Max. level is reached when the yellow
“Com p” light flashes at peak levels. If the
light is on constantly, turn the levels down
to avoid damage to
the PA6BT.
Using Bluetooth - Press the Bluetooth® ®
button. The Bluetooth LED will flash for®
15 seconds. Locate the PA6BT on your
device and select to pair. If pairing fails,
turn Bluetooth off and try again. The®
button also acts as a Stop/Play/Pause.
Powering the unit off will disconnect.
Specifications subject to change without notice.
V20161011
601 E. Pawnee Wichita, KS 67211 316. 263.2852 FAX 316.263.0642 www.galaxyaudio.com
Distributed in Canada by Audio Distributors International ( ) 1275 Newton, unit 6 Boucherville, QC J4B 5H2 CanadaADI
450.449.8177 FAX 450.449.8180
Other Helpful Sources
PA6BT
Manual
(PDF Download)
PA6BT
Product Page
PA6BT
Cutsheet
(PDF Download)
PA6BT
How To Video
Quick Start Guide
PA6BT
Full Range Powered Personal Monitor
TM
FAQ
1. Q. How can I mount my PA6BT to a wall?
A. Instructions for the optional YBHS bracket kit can be found in the Hot Spot manual, located at:
http://galaxyaudio.com/pdfs/HotSpot-Manual.pdf
2. Q. I do not get output on the Thru jack when using a 1/4" input.
A. The Thru output is only for the XLR input.
Printed in China
3. Q. Can I use a condenser microphone with the PA6BT?
A. Yes, there is 15VDC Phantom Power on the XLR inputs.
The Personal
Monitor Experts
4. Q. If I turn the PA6BT off, will I have to reconnect my Bluetooth device?®
A. No, the PA6BT remembers the last device it is paired with and will automatically reconnect.
5. Q. Can I pause the music from my Bluetooth device using the PA6BT?®
A. Yes, when the music is playing, press the Bluetooth button once. It will pause the music. Press again and it will resume.®

Termékspecifikációk

Márka: Galaxy Audio
Kategória: hangszóró
Modell: PA6BT

Szüksége van segítségre?

Ha segítségre van szüksége Galaxy Audio PA6BT, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók hangszóró Galaxy Audio

Galaxy Audio

Galaxy Audio MS5 Micro Spot 5 Útmutató

29 Július 2024
Galaxy Audio

Galaxy Audio HS4 Útmutató

24 Július 2024
Galaxy Audio

Galaxy Audio PA6BT Útmutató

21 Július 2024
Galaxy Audio

Galaxy Audio GPS-8 Útmutató

20 Július 2024

Útmutatók hangszóró

Legújabb útmutatók hangszóró

Alphatronics

Alphatronics Sound 4 Útmutató

16 Január 2025
Bowers & Wilkins

Bowers & Wilkins LCR3 Útmutató

16 Január 2025
Hifonics

Hifonics Vulcan VX6.2E Útmutató

16 Január 2025
Pyle

Pyle PLRGSW64BK Útmutató

16 Január 2025
Power Dynamics

Power Dynamics PDW5W Útmutató

16 Január 2025
Alto

Alto ELVIS 15.2XL Útmutató

16 Január 2025
Alto

Alto PS 4L Útmutató

16 Január 2025
Alto

Alto MS8 Útmutató

16 Január 2025
Alto

Alto OEX900 Útmutató

16 Január 2025
Alto

Alto Tourmax SXA18 Útmutató

16 Január 2025