Használati útmutató Foscam FN9108E-B4

Foscam nincs kategorizálva FN9108E-B4

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Foscam FN9108E-B4 (96 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/96
User
User Manual
Manual
Model: FN9108E-T4 Model: FN9108E-B4
Model: FN9108H/ FN9108HE
Version: 1.0
NVR User Manual
www.foscam.com
I
Table of Contents
Table of Contents.............................................................................................................................................. I
Security Warning.............................................................................................................................................IV
Important Safety Instructions......................................................................................................................... V
Preface..............................................................................................................................................................VI
1 Overview......................................................................................................................................................... 1
1.1 Product Introduction.......................................................................................................................... 1
1.2 Key Features.......................................................................................................................................1
1.3 Relevant Version................................................................................................................................ 3
1.4 Hard Disk Installation........................................................................................................................ 3
2 GUI................................................................................................................................................................... 5
2.1 Before Starting....................................................................................................................................5
2.1.1 Icons Description.................................................................................................................... 5
2.1.2 Common Operations.............................................................................................................. 5
2.1.3 USB Mouse Operation........................................................................................................... 6
2.2 Login.....................................................................................................................................................7
2.3 Guide.................................................................................................................................................... 8
2.4 Shortcut Menu.................................................................................................................................. 10
2.4.1 Channel Config......................................................................................................................10
2.4.2 Main Menu............................................................................................................................. 11
2.4.3 Playback................................................................................................................................. 11
2.4.4 Record.................................................................................................................................... 14
2.4.5 Backup.................................................................................................................................... 16
2.4.6 PTZ Control............................................................................................................................17
2.4.7 IPC Config..............................................................................................................................17
2.4.8 Info...........................................................................................................................................19
2.4.9 Shutdown............................................................................................................................... 20
2.5 Main Menu........................................................................................................................................ 21
NVR User Manual
www.foscam.com
II
2.5.1 Configuration......................................................................................................................... 21
2.5.2 Preview................................................................................................................................... 22
2.5.3 Record.................................................................................................................................... 24
2.5.4 Backup.................................................................................................................................... 25
2.5.5 Network...................................................................................................................................26
2.5.6 HDD.........................................................................................................................................28
2.5.7 User......................................................................................................................................... 29
2.5.8 Event....................................................................................................................................... 30
2.5.9 Restore................................................................................................................................... 32
2.5.10 Upgrade................................................................................................................................32
2.5.11 IPC Config............................................................................................................................33
2.5.12 Channel Config................................................................................................................... 33
3 Access the NVR in Foscam App............................................................................................................... 34
3.1 Download the Foscam APP........................................................................................................... 34
3.2 Create A Foscam Account............................................................................................................. 34
3.3 Add Device in Foscam App............................................................................................................35
3.4 Foscam APP Surveillance Window.............................................................................................. 36
3.5 Watch Live........................................................................................................................................ 36
3.6 Setting................................................................................................................................................ 38
3.6.1 NVR Info................................................................................................................................. 38
3.6.2 NVR Firmware....................................................................................................................... 39
3.6.3 Camera Firmware................................................................................................................. 39
3.6.4 Recording Playback............................................................................................................. 39
3.6.5 Hard disk information........................................................................................................... 39
3.6.6 Reboot NVR...........................................................................................................................40
3.6.7 Delete NVR............................................................................................................................ 40
4 Surveillance Software Foscam VMS........................................................................................................ 41
4.1 Software Installation........................................................................................................................ 41
4.2 Create A Local Account...................................................................................................................42
4.3 Add Device........................................................................................................................................ 43
NVR User Manual
www.foscam.com
V
Important Safety Instructions
This chapter describes how to use the product properly so as to prevent danger and property loss. Be
sure to follow the security instructions when operating this product.
The CR1220 model lithium battery is used inside the device. If other types of batteries are used, there is
a danger of explosion. When replacing the battery, do not put the old battery into fire or handle it with
household garbage. Please dispose of used batteries in accordance with local laws and regulations
NVR User Manual
www.foscam.com
VI
Preface
Welcome to use our product, Network Video Recorder (NVR). This document mainly focuses on the
installation and configuration of NVR application system. With high performance video, user-friendly
GUI, and practical industrial designs. This series NVR is suitable for civil applications such as homes,
stores, internet cafes, and small businesses in addition to mainstream security and surveillance
applications.
Declaration
The feature of product on this manual is just for reference. Please prevail in physical product.
The manual provides multiple product models for reference. The specific operations are not listed
one by one. Please follow the operations depending on the actual product.
Because the actual environment may be discrepant, the actual values of some data may be different
from the values provided in the manual. If there are any question or dispute, the final interpretation of
prevails.
If you do not follow the manual during operation, you will bear any loss caused thereof.
Installation Environment
Precautions
Please keep the device horizontally and avoid inclination or inversion.
Do not install the wireless NVR in humid and dusty environment.
Put the wireless NVR in drafty environment in case of ventilation port being blocked.
Don't touch the power switch with wet hand or damp items to avoid shock.
Do not splash liquid or metal filing on the NVR To avoid short-circuit fault or blaze.
Explosion may happen because of improper replacement of battery, do not replace it by yourself; If
you need, make sure it is the same type of battery. And do not open or repair it.
Do not take the device apart when it is operating (or connecting to power).
Please use suitable and professional hard disk to ensure continues and stable recording.
NVR User Manual
www.foscam.com
2
will have an alarm flag alert that triggers an alarm and alarm logging will be enabled.
Note
When NVR system time and IPC time are different, the NVR recording will based on the NVR
system time.
Playback
You can play recording video files stored in the Hard disk. Recording includes schedule recording,
manual recording, motion recording and alarm recording. Single-screen playback, four screens or nine
screens synchronous playback are supported.
Alarm
Motion Detection Alarm, Human Detection Alarm and Vehicle Detection Alarm.(Human Detection Alarm
and Vehicle Detection Alarm only supports FN9108E-B4 kit/ FN9108E-T4 kit)
You can configure detection information about the corresponding channel in the NVR system. When an
object moves in the detection time segment and detection area, an alarm is triggered, the NVR system
enables detection recording, sends pictures to your mailbox.
Manage
You can search for IPC devices in the LAN through the NVR and add IPC devices to the NVR channel.
Through the NVR, you can also manage IPC devices.
HDD Management
When the HDD becomes exceptional (for example, HDD Loss, HDD Full, and HDD Error), the NVR
buzzer sounds an alarm.
When the HDD is full, you can select the cycle cover the earliest recording or stop recording.
Note
Only FN9108E-B4-2T kit / FN9108E-T4-2T has a 2T hard drive installed at the factory.
Other Functions
Support the logging function.
Support local GUI output and perform shortcut operations through the mouse (left click to select,
right click to return to the previous menu).
NVR User Manual
www.foscam.com
3
Three roles can access the NVR, which are respectively visitor, operator, and administrator. The
rights of the three roles vary from low to high.
1.3 Relevant Version
Name
Monitor
Network
POE Standard
1.4 Hard Disk Installation
If your NVR is FN9108H,FN9108HE or FN9108E-B4-N, you must install the hard disk to the
NVR. FN9108E-B4-2T kit has a 2T hard drive installed at the factory.
WARNING
Before installing a hard disk drive (HDD), please make sure the power is disconnected from the
NVR.
It is recommended that a hard drive be used in 7200 high-speed or above.
Step 1: Remove the cover from the NVR by unfastening the screws on the rear and bottom.
Step 2: Connect one end of the data cable and power cable to the motherboard of NVR and
the other end to the HDD.
NVR User Manual
www.foscam.com
4
Step 3: Place the HDD on the bottom of the device and the n fasten the screws on th e
bottom to fix the HDD.
Step 4: Re-install the cover of the NVR and fasten screws.
NVR User Manual
www.foscam.com
6
Note
If the power LED indicator on the front panel is off, please check if the power supply is plugged into
an electrical outlet.
Shutting Down the NVR
Proper ways to shut down the NVR in the GUI interface: After login, right-click the mouse, you can
click in the shortcut menu. Choose , click the button in the confirmationShutdown Shutdown OK
box. Then turn off the power switch on the rear panel, the power LED indicator on the front panel
turns off.
Note
Don't turn off the power directly when you turning on.
Reset
You can reset the NVR device to restore the factory settings. You can choose any one of the
following methods operate.
Reset button: Press and hold it for 3 seconds to reset all parameters to factory defaults on the
bottom of the NVR.
Local GUI: Right-click the mouse, Choose in the Menu interface, thenMain Menu > Restore
choose to restore defaults in the interface.Restore factory settings
2.1.3 USB Mouse Operation
Plug USB mouse into one of the USB interfaces on the rear panel of the NVR.
The operation of the mouse on the local GUI is shown as below.
Name
Action
Description
Left-Click
Single-Click
Menu or window: select and enter.
Double-Click
Preview mode or Playback mode: Switch between single-screen
and multi-screen.
Click and Drag
Time or Area box: Select the time or zone range.
Time bar: Drag time bar.
NVR User Manual
www.foscam.com
7
Live view: Moving channel arrangement order.
Right-Click
Single-Click
Live view: Show menu.
Menu: Exit current menu to upper level menu.
Note
The Single-Click mentioned in this article is refer to the left mouse click.
2.2 Login
For your security, please set a new user name and password for your NVR before Log
In.
Login page.
Enter the Username and Password, then click on the button. You will be taken to theOK
Setup Wizard.
NVR User Manual
www.foscam.com
8
2.3 Guide
By default, the Guide starts once the NVR has loaded. The Guide can walk you through some
important settings of the NVR. If you don't want to use the Guide at that moment, right click the
mouse to quit.
1. Setting the system time, date format, language, resolution of the monitor and so on.
2. Format HDD.
Click the button to set up the HDD. Note that this will delete all files on the HDD.Format
HDD Full Setting. Select Stop Record or Overwrite.
Note
NVR User Manual
www.foscam.com
9
Only FN9108E-B4-2T kit and FN9108E-T4-2T has a 2T hard drive installed at the factory.
3. P2P.
If you want to know the UID of the device, please scan the QR code. If you don’t want to
use the Setup Wizard next time, check checkbox. Click the FinishNot show again
button to complete the setup wizard.
or Right-click→ Main Menu → Conguration → uncheck the Setup Wizard checkbox.
Click the Finish button to complete the setup wizard.
Note
The P2P in this article is only an example, please refer to the actual situation.
You can also Right-click “ ”, uncheck the checkbox.Main Menu > Configuration Startup Wizard
NVR User Manual
www.foscam.com
10
Click the button.Save
2.4 Shortcut Menu
After login, right-click the mouse, you will enter the shortcut menu.
Right-click in live view mode and select screen from the Shortcut Menu, you can choose
4-screen, 8-screen or 9 screens.
2.4.1 Channel Config
Channel Config
Right-click in live view mode and select to enter theChannel Config Channel Config
interface, On this page you can see device status such as channel, Status, IP Address, MAC
Address, Add IP Camera, Modify IP, Delete/Modify/move up/move down added device.
You can add an IP Camera that is connected to the internet on the NVR.
Step 1: Right-click on main interface, select Channel Config.
Step 2: Select your IP Camera or Auto added IPC.
Step 3: AddClick .
Step 4: Enter username and password of the camera. If your camera is in the factory default state,
you do not need to enter the user name and password.
Step 5: Click OK.
NVR User Manual
www.foscam.com
11
Select a protocol depending on which IP Camera you have.
FOSCAM protocol: The High Definition (HD) IP Cameras for Foscam.
ONVIF protocol: IP Cameras which support ONVIF protocol.
2.4.2 Main Menu
Right-click in live view mode and select to enter the interface, itMain Menu Main Menu
includes Configuration, Display, Record, Backup, Network, HDD, User, Event, Restore, Upgrade,
IPC Config, please refer to .2.5 Main Menu
2.4.3 Playback
You can display the video of every a channel for playback.
Right-click in live view mode and select to enter interface. It supports single-screen,Playback
four screens or nine screens.
On this page you can view the record files stored in the hard disk.
NVR User Manual
www.foscam.com
12
1. Select a date with recording in calendar.
2. Check the checkbox from Channels. You can select up to nine channels for playback at the same
time.
Manage the recording
Button
Description
/
After select the matched recorded file, click the button to play or pause.
Stop
Single Frame
Fast backward. The fast backward speed can be 4 times, 8 times or 16 times of
the normal playing speed. Click this button. The multiple of normal playing
speed is displayed in the lower right of the fast backward icon. For example,
indicates the current fast backward speed is four times of the
normal speed.
Fast forward. The fast forward speed can be twice, 4 times, 8 times or 16 times
of the normal playing speed. Click this button. The multiple of normal playing
speed is displayed in the lower right of the playback page. For example,
indicates the current playing speed is four of the normal
NVR User Manual
www.foscam.com
13
speed.
Audio
Backup. Click this button and you will go to the backup page
Cut. See below the table for details.
Log. Click this button and you will go to the log page.
Full Screen
Cut
Step 1: CutClick , you will go to the interface.
Step 2: Channel Type DateChoose the , , .
Step 3: SearchClick to find the recordings available.
Step 4: Add FlagSelect , then double-click left mouse to select the start time and end time.
Step 5: Insert USB flash drive to the USB port located at the rear of your NVR.
Step 6: BackupClick button to save the video information to the USB flash drive. Tips are available
after the backup is complete
NVR User Manual
www.foscam.com
14
2.4.4 Record
After the IP Camera is added successfully to the NVR, enable Scheduled Record functionality to
the following methods when in the Live View mode.
2.4.4.1 Scheduled Record
Right-click → Main Menu → Record → choose recording channel → Save (Actually, the NVR
system have default set 24h scheduled recording).
In the Live View mode, the icon is at the bottom right of the screen for each channel,
indicating recording is on going.
2.4.4.2 Event Record
If you want to start event recording, select Event in Type, use the left mouse button to
select the time (turned to green), if the other channels operate in the same way, select
Copy.
NVR User Manual
www.foscam.com
15
Note: The default alarm type is Motion Detect.
In the Live View mode, the icon is at the bottom right of the screen for each channel,
indicating recording is on going,and di- erent icons indicate different detection.
: Motion detection
: Human detection
: Vehicle detection
If you want to check the record, right-click in live view mode and select “ >Main Menu
Playback”. Choose channel and date, then click timeline to check record.
Set the event alarm according to the following methodRight-click → Main Menu → Event →
Motion Detect → choose target channel, setting Schedule, Delay, Record Channel,
Tour, PTZ Activation, Send Email Buzzer→ Save.
NVR User Manual
www.foscam.com
17
2.4.6 PTZ Control
NVR can operate the lens steering of IPC, which must support PTZ function.
2.4.7 IPC Config
Right-click in live view mode and select to enter the interface. YouIPC Config IPC Config-1
can set the Image, OSD, Encode, Advanced, Maintenance for the IPC.
Image
Choose to enter the interface, On this page you can adjust the image color mode ofImage Image
the monitor channel.
NVR User Manual
www.foscam.com
18
Encode
Choose to set the information for the main stream and the sub stream.Encode
Note
You can choose to configure mainstream/sub stream information based on the network
environment.
Advanced
Step 1: Motion DetectionChoose .
Step 2: Set Sensitivity, Low, Middle, High.
Step 3: settingClick on the button, set alarm area.
Step 4: Night VisionSet , default to Auto.
Step 4: Set up Vehicle, Human body, White light, and Sound and Light alarm linkage
according to your own needs.
Step 5: ApplyClick button.

Termékspecifikációk

Márka: Foscam
Kategória: nincs kategorizálva
Modell: FN9108E-B4

Szüksége van segítségre?

Ha segítségre van szüksége Foscam FN9108E-B4, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nincs kategorizálva Foscam

Foscam

Foscam FNA216HE Útmutató

14 Január 2025
Foscam

Foscam FN8108W-B4 Útmutató

1 Szeptember 2024
Foscam

Foscam FN9108E-B4 Útmutató

22 Augusztus 2024
Foscam

Foscam FN9108H Útmutató

22 Augusztus 2024
Foscam

Foscam FNA108H Útmutató

22 Augusztus 2024
Foscam

Foscam FN9108HE Útmutató

22 Augusztus 2024
Foscam

Foscam T8EP Útmutató

22 Augusztus 2024
Foscam

Foscam T5EP Útmutató

22 Augusztus 2024
Foscam

Foscam FN7108W-B4 Útmutató

14 Július 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
Soundstream

Soundstream VRN-64HBL Útmutató

10 Április 2025
Panasonic

Panasonic Lumix DMW-AC11 Útmutató

10 Április 2025
Planet

Planet PWR-240-48 Útmutató

9 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
Alpine

Alpine DP2-40C-BC Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025