Használati útmutató Fibaro The Heat Controller

Fibaro Termosztát The Heat Controller

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Fibaro The Heat Controller (52 oldal) a Termosztát kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/52
THE HEAT
CONTROLLER
RADIATOR THERMOSTAT
Quick Manuals. Warranty Terms
ENGLISH 3
POLSKI 6
DEUTSCH 9
FRANÇAIS 12
ITALIANO 15
NEDERLANDS 18
SVENSKA 21
NORSK 24
РУССКИЙ 27
ČESKY 30
SLOVENSKÝ 33
EESTI 36
LIETUVIŲ 39
LATVIU 42
MAGYAR 45
RONĂ 48
3
1. Connect the charger to the micro-USB port to
charge the device.
If you have the temperature sensor:
a. Use a coin to open the battery cover by
turning it counter-clockwise.
b. Remove the sticker underneath the battery.
c. Use a coin to close the battery cover by
turning it clockwise.
2. Disconnect the charger when the LED ring
pulses green (device fully charged).
3. Dismount your current thermostatic head.
4. Depending on type of your valve:
5. Mount the device on the valve and tighten it by
turning the cap clockwise.*
6. Use the included key to click the button.
7. The LED ring will start blinking blue.
If you have the temperature sensor:
a. Click the button on it now.
b. The LED ring will blink
green 5 times if the connec-
tion was successful.
8. Set the main Z-Wave controller in add mode.
9. Triple click the button on the thermostatic head.
The LED ring will start blinking white.
10. If you are adding in S2 authenticated mode,
type in the device pin code (underlined part of
the public key on the label).
11. Successful adding will be conrmed by the
controller.
* Install in horizontal position only!
ENGLISH
Use
adapter:
Danfoss RA-N
Use
adapter:
Danfoss RTD-N
Proceed
normally
M30 x 1.5
For full instruction manual and
technical specication please visit
our website:
manuals.baro.com/en/heat-controller
First launch
FIBARO Heat Controller is a remotely controlled
thermostatic head to control temperature in your
room. It measures the temperature and automati-
cally adjusts the heat level.
It can be mounted without tools on three types of
thermostatic radiator valves.
You can create schedules via app to easily manage
temperature throughout the week.
Read the manual before
attempting to install the device!

Termékspecifikációk

Márka: Fibaro
Kategória: Termosztát
Modell: The Heat Controller

Szüksége van segítségre?

Ha segítségre van szüksége Fibaro The Heat Controller, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Termosztát Fibaro

Útmutatók Termosztát

Legújabb útmutatók Termosztát