Használati útmutató Ferm CRM1005 FC-710

Ferm kompresszor CRM1005 FC-710

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Ferm CRM1005 FC-710 (10 oldal) a kompresszor kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/10

Ferm B.V. • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com 0208/27

Ferm FC-710

Compressor

Kompressor

Compressor

Compresseur

Compresor

Kompressor

Kompressori

Kompressor

äÓÏÔÂÒÒÓ

USERS MANUAL

GEBRAUCHSANWEISUNG

GEBRUIKSAANWIJZING

MODE D’EMPLOI

MODEO DE EMPLEO

BRUKSANVISNING

KÄYTTÖOHJE

BRUKSANVISNING

BRUGER VEJLEDNING

êìäéÇéÑëíÇé èé ùäëèãìÄíÄñàà

Art.nr. 231710

Ferm 192 Ferm

Product: Ferm Compressor

Type FC-710, Art. nr. 231710

Ferm, Genemuiden, The Netherlands

1. TECHNICAL DATA

This is a directly linked 1-cylinder compressor in mobile

design. This compressor is also equipped with a reducing

valve, a automatic shutdown and a quick coupling.

Sound pressure level 83,8 dB(A)

CAREFULLY READ THE INSTRUCTIONS

BEFORE YOU USE THE COMPRESSOR!

2. SPECIFIC SAFETY RULES

BEFORE USING THE COMPRESSOR:

1. Place the compressor in a well ventilated, frost

free area.

To obtain sufficient ventilation and cooling the distan-

ce between the shield and the wall needs to be at least

50 to 60 cm.

2. The following points need to be checked:

- do the voltage of the engine and the engine safe

guard, if any, correspond to the mains voltage (ap-

pliances for a mains voltage of 230 V can be connec-

ted to a mains voltage of 220 V without any pro-

blems);

- an earthed mains connection (wall socket) needs

to be used;

- are the mains lead and the mains plug in a good con-

dition: solid, without any loose ends or damage;

- the pressure reducing valve may not be copletely

closed so as to prevent damage to membranes;

- the oil level with help from the gauge. The oil level

should be within the area indicated by both marks

on the gauge, when the compressor is placed level.

- before use the air tank needs to be empty.

IMPORTANT: To prevent damage to the motor

windings as a result of voltage variation it is advisable

to mount an engine safety switch.

WHILE USING THE COMPRESSOR:

1. Do not use extension cables which are too long.

IMMEDIATELY SWITCH OFF THE COMPRES-

SOR IN CASE OF:

1. defective mains plug, mains line or damage to the

mains line;

2. defective switch;

3. smoke or bad smell caused by scorched insulation.

3. INSTALLATION

The compressor needs to be placed in well-ventilated,

frost-free area. To obtain sufficient ventilation and coo-

ling the distance between the shield and the wall needs to

be at least 50 to 60 cm.

4. OPERATING THE COMPRESSOR

- The mains switch needs to be in “OFF” or “0” posi-

tion before the mains plug is connected to the mains

voltage.

- Bij switching the switch to “ON” or “1” the compres-

sor will operate.

- Always keep the mains lead away from moving parts

of any linked up air-pressure equipment.

- With the use of the reducing valve it is possible to ad-

just the air pressure by hand. By pressing the reducing

valve the chosen position can be locked. However, do

not close the reducing valve too much, in order to

prevent damage to the membranes.

5. MAINTENANCE

The mains plug always needs to be taken out

of the socket (the mains socket) during main-

tenance or cleaning activities. Never use wa-

ter or other agressive liquids to clean the ma-

chine. Clean the machine by brushing it with

a brush.

PERIODIC MAINTENANCE OF THE COMPRES-

SOR WILL PREVENT UNNECESSARY PROBLEMS!

Oillevel

The compressor comes with a special test oil, that must

be Replaced after about 100 hours of use. Check the oil

level from time to time, using the oil gauge.

When the compressor is level and has not been used for

some time, the oil level should be within the area indica-

ted by both marks on the gauge. The oil must be replaced

after every 1000 hours of use. Use compressor oil API

CC SAE 40 rather than motor oil. If the compressor is

GB English

Art.

nr. Type

V~/Hz W RPM LTR. L/MIN BAR

231710 FC-710 230~50 1.500 2.800 50 245 8

Exploded

FC-710

AVAILABLE SPARE PARTS FOR FC-710

REF.NR. DESCRIPTION FERM NR.

1 CYLINDER COVER (RED) 208217

2 REAR COVER 208200

3 COVER 208201

6 VALVE PLATE 208252

7 FAN 208202

9 OIL LEVEL GAUGE 208203

11 CRANKSHAFT + AXLE 208204

8223091 CONNECTION ROD COMPLETE 208205

21 CONDENSOR 25 uF 800025

23 CYLINDER 208210

24 CYLINDER HEAD PACKING 208211

26 GASKET VALVE PLATE HEAD 208212

27 HEAD 208213

29 FILTER 205730

30 STATOR 208221

31 ROTOR 208222

32 CYLINDER PACKING 208216

Ferm 3

used in temperatures below 0°C, use API CC SAE 20 oil.

Every month:

Clean the air filter.

Every 1,000 working hours:

Refresh the oil

Carefully clean the outside of both the compressor

and the engine, to ensure an efficient cooling.

Condensation :

Regularly, i.e. several times a week, drain condensa-

tion from the air chamber, using the drain cock situa-

ted on the underneath of the air chamber.

Have your tool repaired by an expert!

This electric appliance is in accordance with the rele-

vant safety rules. Repairing of electric appliances may

be carried out only by experts other wise it may cause

considerable danger for the user.

We declare under our sole responsability that this

product is in conformity with the following

standards or standardized documents

prEN1012-1, EN60204-1, EN292, ISO5388

EN550014, EN55104, EN61000-3-2, EN61000-3-3

in accordance with the regulations:

89/392/EEC - 91/368/EEC

93/44/EEC - 93/68/EEC

73/23EEC - 89/336/EEC - 92/31/EEC

from 01-04-1999

GENEMUIDEN NL

G.M. Ensing

Quality department

Produkt: Ferm Kompressor

Typ FC-710, Art.nr. 231710

Ferm, Genemuiden, die Niederlände

1. TECHNISCHE DATEN

Es handelt sich hierbei um ein direkt gekoppelter 1-Zylin-

der Kompressor in mobiler Ausführung. Diese Kom-

pressor ist außerdem mit einem Druckreduzierventil, ei-

nem automatischen Ausschalter und einer Schnellkup-

plung ausgestattet.

Schalldruckpegel 83,8 dB(A)

LESEN SIE DIESE GEBRAUCHSANWEI-

SUNG GUT DURCH, BEVOR SIE DEN KOM-

PRESSOR BENUTZEN.

2. SPEZIELLE

SICHERHEITSVORSCHRIFTEN

BEVOR INGEBRAUCHNAHME DER KOM-

PRESSOR:

1. Stellen Sie den Kompressor in einem gut gelüf-

teten, frostfreien Raum.

Für eine optimale Ventilation und Kühlung muß der

Abstand zwischen Schutzkappe und Wand min-

destens 50 bis 60 cm betragen.

2. Kontrollieren Sie folgendes:

- stimmt die Anschlußspannung des Motors und

eventuell der Motorsicherung mit der Netzspan-

nung überein (Maschinen für eine Netzspannung

von 230 V können problemlos an eine Netzspan-

nung von 220 V angeschlossen werden);

- benutzen Sie einen geerdeten Netzanschluß.

- sind Netzkabel und Netzstecker in gutem Zu-

stand: stabil und ohne Knicke oder Beschädigun-

gen;

- Vermeiden Sie zu lange Verlängerungskabel.

- um Schäden an den Membranen zu vermeiden,

darf das Druckreduzierventil nicht völlig geschlos-

sen sein;

- Der Ölstand mittels der Ölstandmesser. Das Öl

soll zwischen den beiden Markierungen auf dem

Ölstandsmesser stehen, wenn der Kompressor

horizontal aufgestellt ist.

- vor Inbetriebnahme müssen der Luftverschluß ge-

schlossen und der Lufttank leer sein.

WICHTIG: Um zu vermeiden, daß Spannungssch-

wankungen Schaden an der Motorwicklung verursa-

chen, ist es empfehlenswert, einen Motorsicherungs-

schalter anzubringen.

Deutsch

DECLARATION OF CONFORMITY (UK)

18 Ferm

AVAILABLE SPARE PARTS FOR FC-710

REF.NR. DESCRIPTION FERM NR.

1 AUTOMATIC ON/OFF SWITCH 240018

2 PRESSURE GAUGE REAR 240100

3 PRESSURE REDUCER MICRO 205887

4 NO RETURN VALVE 1/2” M 205889

5 SAFETY VALVE 1/4” 8,5 BAR 205915

7 RILSAN TUBE 4/6 205902

8 WHEEL 125 MM 205896

9 DRAIN TAP 1/4” 205888

10 RUBBER SUPPORT H50X30 208114

13 CONNECTOR 0° 208219

14 AIR PRESS TUBE 208220

Exploded

FC-710

Termékspecifikációk

Márka:	Ferm
Kategória:	kompresszor
Modell:	CRM1005 FC-710

Szüksége van segítségre?

Ha segítségre van szüksége Ferm CRM1005 FC-710, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók kompresszor Ferm

Ferm CRM1027 FCO-1524 Útmutató

13 Október 2024

Ferm SGM1011 Útmutató

9 Október 2024

Ferm SGM1008 Útmutató

29 Július 2024

Ferm CRM1028 FCO-1006 Útmutató

29 Július 2024

Ferm CRM1002 FC-720 Útmutató

29 Július 2024

Ferm CRM1004 FC-700 Útmutató

25 Július 2024

Ferm CRM1030 FCO-2050 Útmutató

24 Július 2024

Ferm CRM1008 FC 730 Útmutató

23 Július 2024

Ferm Zubehör Werkzeug Útmutató

23 Július 2024

Ferm CRM1001 FCL-700 Útmutató

23 Július 2024

Útmutatók kompresszor

Legújabb útmutatók kompresszor

Fuxtec FX-E1CI20 Útmutató

13 Január 2025

POWERNAIL 445FS Útmutató

12 Január 2025

Güde 805/10/100 PRO Útmutató

12 Január 2025

Güde Airpower 220/8/24 Útmutató

12 Január 2025

Nilfisk VHC200 Útmutató

12 Január 2025

Hyundai HY3200S Útmutató

10 Január 2025

Craftsman CMCC2520 Útmutató

10 Január 2025

Workzone WZK 182 Útmutató

1 Január 2025

Livoo TEA306 Útmutató

31 December 2025

Proviel HK 8/24 Útmutató

27 December 2024