Használati útmutató Fenton RP106W

Fenton lemezjátszó RP106W

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Fenton RP106W (20 oldal) a lemezjátszó kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/20
RP106 Series Record Player
Ref. nr.: 102.104; 102.105
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
V1.2
2
ENGLISH
Congratulations to the purchase of this Fenton product. Please read this manual thoroughly prior to using the unit in order to
benet fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the unit, please ask advice from a
specialist. When the unit is switched on for the rst time,
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore, do
NOT open the housing.
- Do not place metal objects or pour liquids into the unit
This may cause electrical shock and malfunction.
- Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualied technician.
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the unit on. Contact your dealer. Do
NOT connect the unit to a rheostat or dimmer.
- To avoid re and shock hazard, do not expose the unit to
rain and moisture.
- All repairs should be carried out by a qualied technician
only.
- Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a -16A fuse. 10
- During a thunderstorm or if the unit will not be used for a
longer period of time, unplug it from the mains. The rule
is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the unit in
humid rooms or outdoors.
- To prevent accidents in companies, you must follow the
applicable guidelines and follow the instructions.
- Do not repeatedly switch the xture on and o. This
shortens the fetime. li
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Do not force the controls.
- This unit is with speaker inside which can cause
magnetic eld. Keep this unit at least 60cm away from
computer or TV.
- his unit have a built-in lead-acid rechargeable battery. If t
Please recharge the battery every 3 months if you are
not going to use the unit for a long period of time. Or the
battery may be damaged.
- If the battery is damaged, please replace with same
specications battery. And dispose the damaged battery
environment friendly.
- If the unit has fallen, always have it checked by a
qualied technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the unit o prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables
prior to moving the unit.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this unit.
- Keep the original packing material so that you can
transport the unit in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate the CE certicate and
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35 95°C/ °F .
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.
Specications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your nty. Do not make any changes to the unit. This would also invalid warra
your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual. Fenton cannot be held r sible for personal injuries caused by a disrespect of the safety recommendations espon
and warnings. This is also applicable to all damages in whatever form.
3
OVERVIEW
1. Tone A Lever rm
The xed tonearm can be unlocked (raised and lowered) by using this
lever.
2. Auto-s p Switch ON/OFF to
This switch turns auto stop on or o. When the automatic stop is
enabled, the platform will start rotating as soon as the tone arm is
placed over the record and will stop rotating when it has reached the
end of the record. Some vinyl records stop fore the end do not be or
stop when the end is reached. In this case set Auto-stop to OFF.
3. Tone Arm Clip
This specially designed arm clip secures the tonearm while at rest or
when not in use.
4. 33 / 45 RPM Switch
This switch controls the RPM of the turntable platter.
5. Tone Arm
6. Cartridge (with needle)
When the turntable is not in use, it is recommendable to place the
removable protection cover on the stylus.
7. 45R PM Ad tor ap
This adaptor allows you to play 45RPM records.
8. Platter
Place your record here.
9. Spindle
10. Volume Control
Adjust the volume for the internal speakers and headphones.
11. Headphones
3.5mm headphone jack connector.
12. Power LED Indicator
13. Speakers
Bui - stereo speakers. lt in
14. Dust Cover
15. USB port
Use the included USB cable to connect your turntable to your computer. The USB connection will send audio signal from the
turntable to your computer.
16. Line Output
The sound signal from long-playing record is sent to this line output. Connect this signal to the line input of an such as an
amplier or a line input of a CD/DVD player .
OPERATION
1. Connect the record player with the power adapter and plug the other end into a wall power outlet.
2. Remove white protective needle cover by gently pulling towards the front of the unit.
3. Place a vinyl record on the turntable platter and select the desired speed (33/45 RPM) according to the
record.
4. Open the tone arm clip to release the tone arm. Gently move the tone arm and put the cartridge onto the
desired positi the record and the turntable player starts to play. on of
5. Turn the volume control knob clockwise to adjust the volume.
Note: If the AUTO STOP ON/OFF Switch is turned ON, the record will stop automatically when nished If Auto Stop Control is .
turned OFF, record will NOT stop automatically when nished.
AUTO STOP function applies to most 33RPM vinyl records. However, for very few vinyl records, it will stop when it d not yet id
reach the end (in this case, turn the AUTO STOP switch to OFF position and then it will continue playback), or it will not stop
when it has reached the end when AUTO STOP is ON.

Termékspecifikációk

Márka: Fenton
Kategória: lemezjátszó
Modell: RP106W

Szüksége van segítségre?

Ha segítségre van szüksége Fenton RP106W, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók lemezjátszó Fenton

Fenton

Fenton 102.110 Útmutató

21 Szeptember 2024
Fenton

Fenton RP115G Útmutató

14 Szeptember 2024
Fenton

Fenton RP160B Útmutató

3 Szeptember 2024
Fenton

Fenton RP118E Útmutató

1 Szeptember 2024
Fenton

Fenton 102.155 Útmutató

21 Augusztus 2024
Fenton

Fenton RP118 Útmutató

19 Augusztus 2024
Fenton

Fenton RP106W Útmutató

18 Augusztus 2024
Fenton

Fenton 102.166 - RP170 Útmutató

17 Augusztus 2024
Fenton

Fenton RP102A Útmutató

16 Augusztus 2024
Fenton

Fenton 102.107 Útmutató

15 Augusztus 2024

Útmutatók lemezjátszó

Legújabb útmutatók lemezjátszó

Victrola

Victrola VPT-800 Útmutató

12 December 2024
Pro-Ject

Pro-Ject X2B Útmutató

11 December 2024
Denver

Denver VPR-190 Útmutató

9 December 2024
Audio-Technica

Audio-Technica VMN40ML Útmutató

7 December 2024
Audio-Technica

Audio-Technica VMN50SH Útmutató

7 December 2024
Audio-Technica

Audio-Technica AT81CP Útmutató

7 December 2024
Audio-Technica

Audio-Technica AT-VMN95EN Útmutató

7 December 2024
Audio-Technica

Audio-Technica AT-VMN95SP Útmutató

7 December 2024
Audio-Technica

Audio-Technica AT-LH11H Útmutató

7 December 2024
Audio-Technica

Audio-Technica AT-OC9XEN Útmutató

7 December 2024