Használati útmutató Extech MN24

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Extech MN24 (10 oldal) a multiméter kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/10
User’s Manual
MiniTecTM Series MultiMeter
Model MN24
2 MN24-en-US_V2.2 07/15
Introduction
Congratulations on your purchase of Extech’s MN24 Multimeter. This meter
measures AC/DC Voltage, DC Current, Resistance, Battery Voltage, Diode
Voltage and Continuity. This professional meter is shipped fully tested and
calibrated and, with proper care, will provide years of safe reliable service.
Safety
International Safety Symbols
This symbol, adjacent to another symbol or terminal, indicates the user
must refer to the manual for further information.
This symbol, adjacent to a terminal, indicates that, under normal use,
hazardous voltages may be present
Safety Precautions
1. Improper use of this meter can cause damage, shock, injury or death. Read
and understand this user manual before operating the meter.
2. Make sure any covers or battery doors are properly closed and secured.
3. Always remove the test leads before replacing the battery or fuses.
4. Inspect the condition of the test leads and the meter itself for any damage
before operating the meter. Repair any damage before use.
5. Do not exceed the maximum rated input limits.
6. Use great care when making measurements if the voltages are greater than
25VAC rms or 35VDC. These voltages are considered a shock hazard.
7. Always discharge capacitors and remove power from the device under test
before performing Diode, Resistance or Continuity tests.
8. Remove the battery from the meter if the meter is to be stored for long
periods.
9. Voltage checks on electrical outlets can be difficult and misleading because
of the uncertainty of connection to the electrical contacts. Other means
should be used to ensure that the terminals are not "live".
3 MN24-en-US_V2.2 07/15
1
2
3
4
5
Description
1. LCD Display
2. Function switch
3. COM jack
4. 10A jack
5. Positive jack
Note: Tilt stand, fuse, and battery compartment are located on the rear of the unit
Symbols
•))) Continuity
Diode test
micro (amps)
m milli ( volts, amps)
k kilo (ohms)
 ohms
VDC volts direct current
VAC volts alternating current
ADC amps direct current
BAT Low battery

Termékspecifikációk

Márka: Extech
Kategória: multiméter
Modell: MN24

Szüksége van segítségre?

Ha segítségre van szüksége Extech MN24, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók multiméter Extech

Extech

Extech 380942 Útmutató

23 December 2024
Extech

Extech DM220 Útmutató

19 Szeptember 2024
Extech

Extech EX410A Útmutató

30 Augusztus 2024
Extech

Extech MA440 Útmutató

25 Augusztus 2024
Extech

Extech EX355 Útmutató

25 Augusztus 2024
Extech

Extech MA443 Útmutató

25 Augusztus 2024
Extech

Extech MG302 Útmutató

20 Augusztus 2024
Extech

Extech Ex 830 Útmutató

15 Augusztus 2024
Extech

Extech Ex 810 Útmutató

12 Augusztus 2024
Extech

Extech EX 710 Útmutató

11 Augusztus 2024

Útmutatók multiméter

Legújabb útmutatók multiméter

Uni-T

Uni-T UT33A Útmutató

3 Április 2025
Uni-T

Uni-T UT151A Útmutató

3 Április 2025
Uni-T

Uni-T UT171B Útmutató

3 Április 2025
Uni-T

Uni-T UT139B Útmutató

3 Április 2025
Uni-T

Uni-T UT139A Útmutató

3 Április 2025
Uni-T

Uni-T UT219E Útmutató

3 Április 2025
Uni-T

Uni-T UT89XD Útmutató

3 Április 2025
Proline

Proline 15186 Útmutató

26 Március 2025